This is probably a very naive question but :
Is it possible to create a Windows executable file from a Cache MUMPS (COS) routine, such that the routine can be run directly from Windows ?
If so, could some kind soul direct me to a source of information that describes the process.
I am using the free Intersystems Cache installation (CachePCkit V2017.1) on Windows 10 for my own use & personal development.

Thanks

00
0 13 931

InterSystems supports use of the InterSystems IRIS Docker images it provides on Linux only. Rather than executing containers as native processes, as on Linux platforms, Docker for Windows creates a Linux VM running under Hyper-V, the Windows virtualizer, to host containers. These additional layers add complexity that prevents InterSystems from supporting Docker for Windows at this time.

120
5 12 2,358

This time I want to talk about something not specific to InterSystems IRIS, but that I think is important if you want to work with Docker and your server at work is a PC or laptop with Windows 10 Pro or Enterprise.

As you likely know, containers technology comes basically from Linux world and, nowadays, is on Linux hosts were it shows maximum potential. Those who use Windows on a normal basis see that both, Microsoft and Docker, have done important efforts during these last years that allow us to run containers based on Linux images on our Windows system in a really easy way... but it's something not supported for production systems and, this is the big problem, is not reliable if we want to keep persistent data outside of containers, in the host system,... mostly due to the big differences between Windows and Linux file systems. In the end, Docker for Windows itself uses a small linux virtual machine (MobiLinux) to run the containers... it does it transparently for the windows user... and it works perfectly well if, as I said, you don't require that your databases survive longer than the container...

Well,...let's get to the point,... the point is that many times, to avoid issues and simplify, we need a full Linux system and, if our server is based on Windows, the only way of having it is through a virtual machine. At least till WSL2 in Windows is released, but that will be another story and sure it'll take a bit of time to become robust enough.

In this article, I'll tell you, step by step, how to install an environment where you'll be able to work, if you need it, with Docker containers on an Ubuntu system in your Windows server. Let's go...

140
3 10 7,728

Simple problem:

  1. I leave a long-running command in terminal
  2. Switch to another task(s)
  3. Remember that I need to check on my command after a few hours

Is there any way to force terminal to the foreground after current command ends?

This is Windows with cterm/iristerm although Putty/Kitty solution would also be nice.

11
0 6 218
Article
John Murray · Mar 6, 2016 2m read
Who does Windows think I am?

When my COS code is executing in a Caché process it might want to interact with the host operating system. For the purpose of this post I'm focusing on a Windows host, but much of it applies to other host OS platforms as well.

A common example of host OS interaction is when my process wants to read from or write to a file. What credentials will apply when Windows is checking whether or not to allow me access to the file?

To answer that we need to consider another question. How did our process start?

30
0 6 693

Terminal scripts can be used to run pre-designed commands on the terminal, like a batch file.  You can write anything that can be executed on terminal, like for loop, if else and so on,  inside Terminal scripts. In this article, I will show you how to call Terminal scripts, how to use parameters in Terminal scripts and how to avoid session disconnected when running Terminal scripts. If you have any information about how to use Terminal scripts or you have any feedback, please feel free to leave a comment.

40
2 6 1,675
Article
John Murray · Jun 12, 2017 1m read
Setting the Windows service account

I recently helped a site investigate a problem that appeared after they upgraded their Windows instance of Caché from 2015.1 to 2017.1. A terminal session launched from the server's desktop cube was unable to run OS-level commands using the $ZF(-1) function. For instance, using the no-op command "REM" as follows:

write $zf(-1,"rem")

was returning -1, indicating that the Windows command could not be issued.

80
1 6 976

Hello everyone :-)

I would like to update Atelier from version 1.0.262 to the 1.3 one. So I clicked on Help --> Check for updates, and I get these first error messages:

"No updates were found in available software sites."

"Some sites could not be found. See the error log for more detail." etc. cf picture below talking about Proxy Authentication.

10
0 5 243
Question
Anzelem Sanyatwe · Feb 19, 2020
Disabling Telnet

Good Day;

looking at disabling Telnet - on Windows - Cache 2012,2017. The security scans don't need it on network.

But still leave users able to use `Terminal - direct - on the box should be fine.

am posting here for quick refs (as this is a common security vulnerability out there).

 

Regards;

Anzelem.

00
0 5 235

Does anybody else have problems installing the  Caché 2017.1 FT for Win_x64?

I'm getting an error "Unable to execute the required file: The following system error has occurred: The system cannot find the file specified. (2)"

This is happening with the very latest version (build 726) and the previous one ( build 720), whereas the builds before were fine.

I've uninstalled Caché to see whether it was an upgrade vs clean install problem but it makes no difference.

00
0 5 420

Hi All,

I need some help with sending PDF files to printer using cache instead of using third party tools(Adobe, foxit reader, etc..).
Sometime i getting access issue with the exe files.

Can able to send text data to printer using below code.

Set Dev="|PRN|PrinterName"
OPEN Dev:(/DATATYPE="TEXT"):80
USE Dev Write "Test printing",!
CLOSE Dev


Any suggestions on sending PDF to printer?

00
0 3 589

I've seen a few password change posts, but I wasn't 100% sure it was the same process, so I am asking here. We periodically have to change the passwords for a few Cache user accounts across several servers. Is there a process/script to change these passwords without having to go into the web portal on each server?  Thanks so much, and I apologize if this was covered in some of the other articles that I've run across. Just looking for the best method.

00
0 3 224

Hi,

Thanks for your time.

Plain $ZF(-1) and $ZF(-2) calls from Cache Studio or Terminal have stopped launching the OS shell from Win10.

cmd (Windows Command Prompt) should be launched.

Configuration:

Windows 10 Anniversary Update, Ensemble 2016.2.0.585.0 Developer Edition x64

Is this common? I have enabled both %Developer role and a Cache CallOut privilege for all users that operate in this scenario.

In Terminal, W $ZF(-1) prints -1, W $ZF(-2) prints -1

In Studio, W $ZF(-1) hangs the IDE, W $ZF(-2) prints 0

00
0 2 722
Article
Timur Safin · Jan 16, 2017 15m read
Part I – Thoughts about package manager

Have you ever thought what could be a reason why some development environment (database, language) would eventually become popular? What part of this popularity could be explain as language quality? What by new and idioms approaches introduced by early language adopters? What is due to healthy ecosystem collaboration? What is due to some marketing genius?

100
2 2 990
Question
Alexi Demetriou · Jul 13, 2017
EmergencyId startup

Hello, I am writing to request assistance on an issue I appear to be having when accessing Ensemble. I have it running on a Windows virtual machine, on a Mac laptop, and am trying to access it through the emergency ID account. When starting Ensemble through the command line window using ccontrol start ENSEMBLE /Em... I get an error and Ensemble does not start. Below is the error message I am getting when checking the logs:

10
0 2 615