Hello fellow developers, I hope this post finds you well.

I have an issue regarding two XSDs that we need in order to proper correlate an %XML.Reader object with the Schema's XML properties.

The XML in question is JRXML, and it's used for Jasper to draw a PDF file.

The main XSD file can be found at http://jasperreports.sourceforge.net/xsd/jasperreport.xsd.

0 1
0 25

Good morning, evening, night,... wink

A small reflection/question for today... it's true that new IRIS for Health (I4H) releases are more and more powerful each time regarding FHIR capabilities. Nowadays it allows us to consume FHIR resources with extrem easiness, we can connect with end-points in external FHIR servers very easily and make I4H act as passthrough or consume their resources... or, even more, we can define, configure and run a FHIR repository in, literally, less than 5 minutes.

5 3
0 193

As you have probably noticed, online product documentation has advanced tremendously in the last few years. Among numerous improvements under the hood, documentation has become easier to read and navigate. And we now have a powerful search engine that gets you to what you need more accurately than we could ever do with the old system of shipping documentation in the product. While most of you have probably had nothing but positive impacts on your workflows, it has come to my attention that some of you may be having a slight problem accessing custom class documentation.

10 3
3 288

Now the Classes/Rutines/DeepSee files will be automatically exported to the working directory after saving or compiling and files will be automatically deleted .

Installation

To install isc-dev , you just need to download and import the file isc-dev.xml from last release.
Some ways to import isc-dev .xml file:

  • Go to Management Portal -> System Explorer -> Classes -> Import and select the XML file.
  • Drag the file over Studio.
  • Terminal command:
NS>do $system.OBJ.Load("yourpath/isc-dev.xml","ck")
NS>zpm
zpm: NS>install isc-dev

How to enable this feature:

  • After importing the class in the target namespace, run the following method to set up the working directory:
NS>do ##class(dev.code).workdir("/path/to/your/working/directory/src/")
  • Go to Management Portal -> System Administration -> Configuration -> Additional Settings -> Source Control.
  • Select the target namespace and set the dev.FileManExtension class as the main one and save it.
  • Try to create a new class in the studio and save/compile it
  • Enjoy!
2 3
1 270

I have a Business Service that reads a file from a folder and sends it as a string to a Business Process. In the business process, I need to add a string to the end of the file string that is coming into the Business Process. I am trying to do this in object script in studio and I am struggling to figure out how to add the string to the end of the other string. I am still new to studio and object script I have been reading up on the documentation and I am not sure what is the best way to accomplish this.

0 6
0 196

Please, I am having trouble connecting to one of several Health Share servers using ISC's Visual Studio Code add-on.

Installation seemed to go smoothly. I have InterSystems's Studio and was able to automatically pull in my existing connections. However when I try to make a connection it fails.

Here is a configuration of one connection slightly edited for security:

"xxxx-hsiecommon-base": {

"description": "This has been created by the CCR system export.",

"username": "therock",

0 3
0 277

Hello

I am trying to import a WSDL using the wizard and it outputs:

ERROR #6413: Element 'wsdl:binding:operation:msg': corresponding to message null : http://services.sanidad....

I have tried to find more information:

It is close to this case, however it is not the same error number:

0 1
0 257

I would like to create a toolbar button in Cache Studio. After clicking on it, it would run a custom command (eg: to execute a routine that will clean a global).

I took a look at dialog that is shown after right clicking on a toolbar in Studio, then choosing "Customize" but AFAIK there is nothing there that allow such a thing.

I know it's possible to customize menu items by extending %Studio.SourceControl.Base class, is there something similar for toolbars ?


Here is some base code example (based on Danny Wijnschenk answer) :

0 6
0 166

Hi Everyone,

Has anyone tried to write down a function in a routine that list all of possible function inside the routine?
I can only think of iterating through the routine line one by one and differentiate between function and function definition.
Is there any existing function that can be utilised? I think it should work similar to how

0 5
0 300

Hi

I'm using a class which extends %XML.Adaptor adaptor and I want to create an XML file with multiple namespaces, like the following:

<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap>

However, I don't see how to do this with the code I have. So far, I have

0 2
0 235
Question
Salma Sarwar · Jan 19, 2018
Gitlab hooks for Studio

Hi

I am in the process of trying to implement version control software with studio. Has anyone got any recommendations (either Linux based/windows based) as a place to start I have installed Gitlab and I wanted to know whether anyone has come across any obstacles using this.

I was also wondering whether anyone has developed any hooks for Gitlab that works well with Studio as I would prefer if there was a more integrated solution with studio? Any help with this would be great.

Thank you.

Kind Regards,

Salma

0 7
0 761

If I open a terminal and type the following commands, sc is an error:

set validator = "sc = ##class(%Library.Numeric).IsValid(""BLAH"")"
set @validator
write sc

At the end, when I write sc I get:

0 L'BLAH9
             DOCXT010,#e^zIsValid+1^%Library.Numeric.1^1e^^^1

However, if I call the following class method using the arguments "%Library.Numeric" and "BLAH", sc is undefined

0 12
0 280

How to find a global's original namespace ? Potentially mapped from a different namespace .

I have a global ^Custom that exists in multiple namespaces but it could mapped from namespace Drone(A) to Launch(B)

Without access to Cache management portal how to find where is my global located using cache code ?

Like if ^Custom == ^[Drone]Custom ??

0 5
0 225
Question
Dustin Knudsen · Jun 22, 2021
content assist

Currently we're using InterSystems Cache Studio Client 2017.2.2 Build 865

I'm currently going through training and one of the videos mentioned using Control+Space to bring up the content assist window.

It's in reference to Atelier IDE, but I'm curious if Studio also might have a tool similar to that?

0 2
0 111

Hello, everyone,

I'm trying to find solutions to a problem that's becoming quite boring.
On only one namespace, the sudio is very slow.
The studio freezes completely for 5-10 seconds when I save or compile a class. Sometimes it also freezes for no apparent reason at a random time...
It stops when I change namespace...

Do you have any idea what that could be?

Thank you in advance

0 15
0 339

Hello,

First of all thank you for your time reading our topic

We would need some help from experienced people

We have a SOAP Service with more than 10 methods

Our aim is to include all classes being used by this SOAP Service, in a Studio project

The challenge is that there are plenty Data classes (which extends from (%SerialObject, %XML.Adaptor))

▶️ Is there a recommended way to include all project's classes in a Studio project?

0 1
0 118