Syndicate content 0  
 
All time
Article
· Apr 26, 2021 3m read
SSH for IRIS container

Why SSH ?

If you do not have direct access to the server that runs your IRIS Docker container
you still may require access to the container outside "iris session" or "WebTerminal".
With an SSH terminal (PuTTY, KiTTY,.. ) you get access inside Docker, and then, depending
on your needs you run "iris session iris" or display/manipulate files directly.

Note:
This is not meant to be the default access for the average application user
but the emergency backdoor for System Management, Support, and Development.

2 34
0 1.2K

For Global Summit 2016, I set out to showcase a Reference Architecture I had been working on for a National Provider Directory solution with State Level Instances and a National Instance all running HealthShare Provider Directory and all running on AWS Infrastructure.

In short, I wanted to highlight:

  • The implementation of Amazon Web Services to provision the infrastructure, including the auto-creation of the state level instances through Cloud Formation.
  • The use of the HSPD Broadcast functionality to Notify Upstream Systems Changes in Master Provider Data.
  • The implementation of a transformation of the standard Broadcast Object to HL7 MFN for interoperability.
  • The principals of Master Data Management applied to the Provider Directory.

5 4
0 1.8K
Question
· Mar 31, 2017
Troubleshooting Disconnects

One of our Departments are claiming that we are loosing HL7 messages that are sent from their Vendor's system to Ensemble.

I know interfaces 101 if we have no record of the message then we never received it, however they are insisting they are sending it.

I asked them to provide the ACK's if they sent the messages but Ensemble had no corresponding Message Control ID (MSH.10) .

Currently I have the following settings...

0 2
0 1.9K

Hello,

In all web services, i need to my get login and token. So with Postman, i tried to call a HTTP request where I put the login/token in the header :

I tried to get data from Http request header. The REST APi use %CSP.REST. I tried something like that :

But it didn't work..

Someone can give me some example or other method ?

Regards,

0 2
0 1.9K

Introduction

InterSystems has recently completed a performance and scalability benchmark of IRIS for Health 2020.1, focusing on HL7 version 2 interoperability. This article describes the observed throughput for various workloads, and also provides general configuration and sizing guidelines for systems where IRIS for Health is used as an interoperability engine for HL7v2 messaging.

6 3
4 1.8K
Question
· Aug 11, 2020
JDBC Gateway Server

Hello all,

I'm trying to setup the JDBC Gateway Server so customers can connect to IRIS remotely using JDBC and not ODBC. But I'm facing a problem connecting, as our system department tells me IRIS is using the loopback address (127.0.0.1) and that makes remote systems cannot connect to port 53773 (the default port for that).

So, I would like to change this 127.0.0.1 host for the hostname but I cannot see where to do it:

1 15
0 1.8K

Hi Community,

Did you know about OWASP and Top Ten Web Application security risks to your Web API or Web Apps?

OWASP is a community foundation created to help us to improve the security of web apps/web APIs. OWASP do the web apps more secure through its community-led open source software projects, hundreds of chapters worldwide, tens of thousands of members, and by hosting local and global conferences.

2 2
2 1.8K
This is the second part of my long post about package managers in operating systems and language distributions. Now, hopefully, we have managed to convince you that convenient package manager and rich 3rd party code repository is one key factor in establishing of a vibrant and fast growing ecosystem. (Another possible reason for ecosystem success is the consistent language design, but it will be topic for another day.)
6 23
1 1.4K

Hi,

Please let me know best way to restore single cache database of 300 GB from one server to another with minimum downtime.

Cold backup will take lot of time for 300 GB database size and snapshot backup not possible.

Not sure about cache online backup which take all databases backup.

0 5
0 1.8K

This morning on the old Caché Google Group, someone posed the following question, which I've decided to answer here, because it's interesting!

Is there a way to iterate ClassMethod's params, and get param's names and values?

The first answer I can come up with is: it's not easy! In any method, you could try to write code like this (where methodName is the name of your method):

7 1
0 1.8K

Is it a good practice to set the MAXLEN value of %Library.String property type? Will it lead to wasted storage if its not really using it?

For example, I have to store a 5 characters long string into the below str field. Which of the statement is recommended?

Property str As %String;

vs

Property str As %String(MAXLEN="5");

0 2
0 1.8K

I'm attempting to configure VS Code's InterSystems Server Manager to establish a connection to an IRIS for Health server. It has a standalone CSP gateway running on an Apache server with TLS enabled. The port for all IRIS api and browser traffic is 443.

I've configured the webServer section's host, port, and variations on pathPrefix (including no pathPrefix entry), and have the correct user ID set. The password is stored in the server keychain.

The connection simply fails with "Server could not be reached." Nothing in the Output or Problems tabs.

3 5
1 1.8K

There's an easy new way to add certificate authority (CA) certificates to your SSL/TLS configurations on InterSystems IRIS 2019.1 (and 2018.1.2) on Windows and Mac. You can ask IRIS to use the operating system's certificate store by entering:

%OSCertificateStore

in the field for "File containing Trusted Certificate Authority X.509 certificate(s)". Here's an image of how to do this in the portal:

15 5
4 1.7K
Article
· Oct 6, 2016 4m read
RESTful Exception Handling

A beginner’s guide to Exception Handling in RESTful web services. The article gives an example how the various error conditions during processing a service request can be handled.

We expect our client – server communication working in a flawless operational condition, running error free software. But we are prepared to handle exceptions. Are we? So far in the examples of the previous sessions were not. We did not care about exceptions. The result? In any error incident it took ages to figure out what the problem is and more importantly how to fix it.

3 1
0 1.8K

Hi,

I try SFTP connect by ObjectScript.
But occurred this error. Can't connect by SFTP key-pair authentication.

:ERROR #7510: SSH Error '-18': SSH Error [80101012]: Username/PublicKey combination invalid [80101012] at Session.cpp:458,0

Key pair was generate this way.
ssh-keygen -m pem -f ~/.ssh/id_rsa
"id_rsa" and "id_rsa.pub" is generated.
Passphrase is empty.

sftp command is connect successful.
ex.
sftp -i .ssh/id_rsa sftpuser@localhost

0 11
0 1.8K

Sometimes, we need to copy part of the properties of an object into a different one.
The simplest thing would be to do the following:

Set obj1.FirstName = obj2.FirstName

Set obj1.SecondName = obj2.SecondName

What happens if the object contains a large number of properties? or we just want to extract an important group of data, and complement the information in another object?

Having the following classes:

4 6
0 1.7K

Index to Articles

Published 2018-05-11 Last edit -

Hi All

I this article I detail some strategic issues that a new development UI will need to address - these are the ones that I can think of now - others may come to light during this journey.

See the webinar by Eduard Lebedyuk here from the last Global Summit describing modern web development and Caché

And, as always, if I have missed something please comment....

13 13
2 1.6K

We finished our last lesson with our Widgets Direct page iterating over a list of widgets, displaying an ID and a Name value. While we have been able to achieve this with only a small amount of coding, the page itself is not the most visually appealing place to be. The AngularJS framework is providing a powerful Model-View-Controller framework for our structure and logic, but it does not implement anything that will provide a nice UI experience.

6 3
0 1.8K

I have a cache client with a list of several servers.

One of the server is working with an IIS server that is not the Cache DB server.

The connection to the IIS server is only through https (SSL)

I tried to define the Web Server IP Address to https://some.server.name but it didn't let me to specify the https

So I tried to define Web Server Port to 443 but when I chose the SMP it's trying to open http://some.server.name:443/csp/sys/UtilHome.csp

1 10
0 1.8K

I am creating a BPL using the Management Portal instead of creating a custom class.

As per the documentations 'request object' contains properties those were in the original request message object or primary request and can be reference using the dot syntax.

So if the primary request was an HL7 message, i should be able to pull the value MSH:9.2 as follow

request.{MSH:9.2} and assign it to a context property

0 5
0 1.8K

Hi All,

I have a general query in regards to developers experience on extracting data from cache databases and the most efficient way to do so. I work with a number of clients who have applications with cache databases and require the data off the host system and onto data warehouse platforms for research and analysis. Often they require the data in source state which means the extracts are often simply a table scan of the entire database table without any aggregation or manipulation.

1 2
0 1.8K