InterSystems announces the Maintenance Release (MR) of Caché, Ensemble and HSAP 2018.1.8. This is a maintenance release with many updates across a wide variety of areas.

Caché and Ensemble

Full product installation kits can be downloaded from the WRC Software Distribution website:

• Caché
• Ensemble

For information about the corrections in this release, refer to the Release Changes Notes. The documentation for Caché and Ensemble includes these as well as the Supported Platforms document, the Class Reference, and a full set of guides, references, tutorials, and articles.

The build number for this

I am looking into creating a ZSTOP as you probably have seen from my previous posts, is there a way to capture the type of shutdown that occurred? So say if there was an unknown hardware failure (forced), vs a user shutdown? Mainly looking for user or system shutdown when we force another destination to become the primary in the mirror. So if a user shutdown the production to do.,... Task A, Task B etc..

Thanks

Scott 

Hey Developers, 

Please welcome a new set of Global Masters badges for ✔️Accepted Answers on Developer Community! 

As you may remember, you get +150 points on Global Masters each time your answer marked as accepted on DC. And now we have a special set of badges and additional points for a number of accepted answers!

And...

🐞🐛▶ There is a helpful tool which allows us to debug code visually with different colours.

I found a package on OEX for a Sharding Demo
If Sharding is NOT included in the Community License
I can not use the Community Distribution but require a different one.
And have to add ZPM manually. 

Hi Community,

Watch this video to learn about InterSystems FHIR Server, the turnkey FHIR data solution that empowers FHIR application developers to focus on building life-changing healthcare applications:

⏯️ What is InterSystems FHIR Server

To prepare a migration to IRIS I use Docker images.
The (aged) application is built around Caché Terminal
And on Windows,  IRIS uses the same ctelnetd.exe as Caché.

In my Docker installation, Telnet Settings are just grayed out in SMP.
and my Terminal can't 'connect.
Port mapping is OK and verified with TCP

Working from the console in Docker  with the whole set of ESC and
screen formatting is not acceptable.
We tried WebTerminal but there is just no Partition behind as in Terminal.

How can I switch on Telnet support in the Docker image?
 

InterSystems is happy to announce the availability of our newest Data Platforms release: Caché and Ensemble 2016.2

The highlights of 2016.2 are:

• Server support for Atelier, the new Eclipse-based IDE
• Support for OAuth 2.0 and OpenID Connect
• SQL syntax has been enriched with support for JSON
• SQL improvements and performance enhancements

For complete technical details of what’s changed in 2016.2, review the Caché release notes and the Ensemble release notes.  Additional materials have been posted to the InterSystems Developer Community. 

Atelier is available separately and the initial release

Suppose I created a new DeepSee class to display a new item in the dashboard.

DeepSee.Component.datePick

Wich, in general, is just a copy of a similar class in %ZEN with minor changes. I need to include it in the base install. How can i do this? Am I ever allowed to change the composition of system classes? 

Hi Guys,

Could I have the steps on how to restore Cache.dat from Journals pls?

Thanks

Is there a way of comparing code running on two Ensemble servers - ideally excluding certain types of difference?
We are a new team working in HealthCare (lots of HL7, some web-services). As well as doing new development on local servers with suitable source control, we have a large code base we've inherited from an external supplier for which we have no log of versions or differences. We have a live server and test server - and we've stumbled across a couple of places where there are differences in logic in addition to the expected differences in endpoints.

I know this problem something to do with sort and collation and string comparison vs numeric only strings, but I can't fathom out the details of it. 

I have the following global, where all values are suffixed with a space, I believe the intention is to prevent empty strings and force string comparisons rather than numeric.Which is fine when searching for an exact match, so searching for "ABC" internally looks for "ABC ", or "800999" looks for "800999 ".However one function tries to search for strings containing, (specifically beginning with), a partial code.

Hello,

I want to generate and return an http response based on the input of a http GET request. For my first steps I used an EnsLib.Http.GenericService, which uses an EnsLib.HTTP.InboundAdapter to receive requests like http://[my server]:[my-port]/some-path?ID=12345678.

On the inbound side I receive a EnsLib.HTTP.GenericMessage Object which contains the parameters and some other useful information that I can work with.What I would like to do now is to create a simple HTML page, which contains some Information specific for the given parameter values.

Hi Every one

I'm working on how to use SOAP with my API and StoredProc.

Currently, the method I use is csp page to be able to get pamater from external website and Call my StoredcProc
Step 1 Get pamameter from external site
Step 2 Run My Storeproc
Step 3 Return JSON format

How to create soap and call StoredProc function from external website?

Hi all,

I'm trying to install ZPM into a new instance of IRIS to download packages of utilities in our develop server.

When I'm loading the file zpm-0.5.3.xml it is throwing the following error:

Any help?

Thanks in advance

Hi, 

We're having an issue with an inbound message to a Healthshare Business Service where the '£' sign is not being recognised and is being passed onto our downstream systems as '?'.

NTE|1|ODRCMNT|test!���comments  �  for  pou$nd si�n

We are using the 'latin1' selection for the Encoding.

Does anyone know the correct Char Encoding to use to remedy this issue?

Regards,

Martin

Hey guys.

I'm having trouble using the Certificate in my BO.
It started to occur after updating the certificate.

I have 2 configurations and 2 certificates, the first one was updated and no error occurs, the second one, the  bad certificate or Handshake failure errors occurs. Both have the same configuration.
I already tried marking SSLV3, handshake error occurs. When I unchecked it, a Bad Certificate error occurs.

Do you know what I can do in this case to solve it?I looked for some threads in the community, and I didn't find a solution for my case.
The Certificate works correctly on other systems

Hi all,

When I run the ^SystemPerformance utility to collect performance data about my IRIS instance (community), it manages to collect all sorts of data except for data related to ^perfmon. I am using %SYS to run the utility which should have all privilages, not sure what's meant by the below error message

perfmon

Command failed to run.
Error response from 'logman' command:


Error:
Access is denied.
Try running this command as an administrator.

Thank you!

Hi developers!

You are experts in IRIS and know all tricks. The functionality of $ZF(-1,-2,-100, ......)
is nothing new to you And you know the limits of this functionality.
Both give you access to your local server command line environment. And that's it.

Hi everybody!

Many developers prefer a dark version of applications. Not surprisingly, @Guillaume Rongier posted an idea of making a dark version for the Developer Community. 

So we look forward to hearing from you.

Please send us your feedback by using this Poll on the Ideas Portal, and by voting and commenting on the relevant idea.

Thank you in advance for your votes and have a good day!

Hi  

Is there any build in solution to convert HTML to PDF?  if yes please how

Thank you

Hello,

I'm trying to populate an object with method :  JSONStreamToObject

This is an extract from my JSON:

 "GEOMETRIE_POINT": {
    "GEO_TAB_COORDONNES": [
      673993.9987,
      7048087.2013
    ]
  },
  "GEOMETRIE_LINE": {
    "GEO_TAB_COORDONNES": [
      [
        675221.6371,
        7049913.2718
      ],
      [
        675149.6053,
        7049998.3874
      ]
    ]
  }

It work fine with GEOMETRIE_POINT with this class definition:

Class Test.GEOMETRIEPOINT Extends (%Persistent, %JSON.Adaptor, %XML.Adaptor, %RegisteredObject, Ens.Request) [ Inheritance = right,

Hi Developers,

This February, you posted 86 new questions on the Developer Community: 

Hey Developers,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Achieving Single Sign-On: External Providers, HealthShare Unified Care Record, Clinical Viewer @ Global Summit 2022

InterSystems announces its third developer preview, as part of the developer preview program for the 2023.1 release. Many updates and enhancements have been added in 2023.1 and there are also brand-new capabilities, such as production-ready support for Columnar Storage, ability to use Bulk FHIR, and support to MacOS 13 Ventura. Some of these features or improvements may not be available in this current developer preview.

Future preview releases are expected to be updated biweekly and we will add features as they are ready. Please share your feedback through the Developer Community so we can

Try a new (free!) self-paced online program! Programs include everything you need to start using InterSystems products in your role. You can easily track your progress through an entire program, or select only the learning materials you need.

Two InterSystems IRIS for Health™ programs are open to all customers:

• Getting Started with InterSystems IRIS for Health for Integrators
• Getting Started with InterSystems IRIS for Health for Coders

Two programs are available to HealthShare® customers:

• Getting Started with Unified Care Record for Integrators
• Getting Started with Unified Care Record for Implementers

How do you learn InterSystems technologies—do you read the docs or watch videos? Have you taken classroom courses or gotten certified?

We want to hear from you: What do you think of the resources you've used, and how can we improve? Tell us in this brief survey.

Introduction

This article is intended to be a simple tutorial on how to create ODBC connections and working with them, since I found starting with them a little bit confused, but I had amazing people to take my hand and walk me through it, and I think everyone deserves that kind of help too.
I'm going to divide each little part in sections, so feel free to jump to the one you feel the need to, although I recommend reading everything.
I'm going to use the sample data created in a previous article, Quick sample database tutorial: Samples.PersistentData, with the properties Name and Age.

Creating

Hello and welcome to the Developer Ecosystem Winter News!

This winter (or summer for those of you from another hemisphere) we've had a lot of online and offline activities in the InterSystems Developer Ecosystem. 

In case you missed something, we've prepared for you a selection of the hottest news and topics to catch up on!

In a healthcare setting we've an Ensemble namespace through which passes a key HL7 feed (the ADT feed from our PAS). It is split up, transformed and passed on to multiple downstream systems. We consider the feed going to each downstream system an interface. Each interface is developed as separately as possible - typically as a separate branch of our git repo (which we access via VS Code).

All this is fine till we try and name the version(s).We both want to know what is currently in live (the sum of all the interfaces in the namespace) and know what version each  specific interface is at.