#Management Portal

Hi colleagues!

Is there a way to export globals in XML if I have the access to Management Portal or any other web app?

Currently, it gives the option to export into gof format only.

I am getting the below error while navigating a next page from the list in Management Portal

Must have Java Enabled to use hyperevent call

Unable to locate CacheCSPBroker applet!

I have already enabled Java in Java Control Panel 

Any help is much appreciated

Thanks & Regards,

Sadagopan TS

Announcing gj :: locate.  A simple extension for VS Code that will help you get to the source of your errors.

In VS Code, using either the Serenji extension or the basic InterSystems objectscript extension, this small add-on will open the appropriate class or routine and position you at the exact line where an error occurred.

No more tedious counting of lines to find <UNDEFINED>zCredit+206^Ledger.Invoice.1.  Instead, with gj :: locate you can get there with just a couple of clicks.

This 20 second video tells it all:

Download now and enjoy getting to the source of your errors.

You may think it isn’t too difficult to get from label+offset^routine to the actual source line responsible for the error.  For an expert it isn't that hard... most of the time.  But there are enough oddities and special rules that even an expert can get it wrong, whilst spending a lot of time trying to get there.

gj :: locate is the latest tool from George James Software – it debugs any error, class or routine by converting the location of an error in compiled .int code to the corresponding location in your source, and then taking you right there.

Image this scenario…

Upgraded healthshare to health connect. The search box is not selecting the correct url 

i.e. selecting message loads 

http://penn-tietest:57772/csp/sys/EnsPortal.MessageViewer.zen?$NAMESPAC…

instead of this which when go through the menu it loads 

http://penn-tietest:57772/csp/healthshare/tie/EnsPortal.MessageViewer.z…

it actually loads from interopability view messages as 

http://penn-tietest:57772/csp/healthshare/tie/EnsPortal.MessageViewer.z…;

Please can someone advise 

I'm almost running out of disk space so I want to move 1 DB to a different hard drive.  
It's a rather simple but lengthy action during a shutdown of IRIS.  
But is this somehow possible under runtime in a stand-alone installation?  
I'm looking for kind of a "local drive failover"  
note: Mirror or Shadow is not an option.  

Ever noticed that the Type column of the Web Applications page in the Security section of Management Portal is showing you redundant information?

After running an extensive block of daily statistics my IRISTEMP has expanded dramatically.   
But FreeSpace shows 97% unused and FREE space.   
How can I shrink IRISTEMP in runtime without shutdown and manual intervention
(which was the traditional approach)

Does anyone know how to disable the auto-refresh in Healthshare, especially for Message viewer , Business process designer, DTL editor pages?  

These pages in management portal refresh every 15min( i.e. as per the session time out setting) . I tried to  set the following two configs to disable the auto refresh but both had no impact. 

set ^EnsPortal("DisableInactivityTimeout","Portal") = 1

set ^%SYS("Portal","EnableAutoRefresh") = 1

Thank you for your help. 

Mary

When I create a TASK on the Primary mirror member and Try to create the same TASK in the backup mirror member,  It Gives me CSP Application error.

The TASK gets created in the Primary node without any errors and When creating in the Backup node it prompts the error.

It happens is IRIS and I didn't face this in CACHE.

Finally what I did is export the TASK in Primary and Imported in Backup.

Is this a feature of IRIS?

A simple question: View Global Data  page shows globals always in ascending subscript order. Very often I need to see latest page, is there any trick for this?

Update: I mean to see last subscripts in Management Portal, not using the code

About this article:

In InterSystems IRIS, the default form of access to the management portal is HTTP, which means that if the client is in the office and the server is in the cloud, many clients probably desire to encrypt their traffic in some way.

Thus, we would like to show you some ways to encrypt your traffic to and from the IRIS management portal (or various REST services) running on AWS.

This article uses the IRIS built-in apache server for access. It should not be used for benchmarking purposes or as a method of access from production environments applications.

I find the Data Import Wizard very handy. Has anyone thought of enabling the form in the application where it can be adapted for application user requirement?

csp/sys/exp/UtilSqlExImWizardContent.csp?Wizard=Import&$NAMESPACE=

Hi Community!

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Management Portal Overview

Setting up Management Portal Help Pages for Full WebServers

On each page of the System Management Portal, there is a “Help” button.  This takes users to an article in documentation that describes the page functionality and use. 

Caché provides local documentation for all of these articles. 

InterSystems IRIS does not provide local documentation.  Instead, the Help button will redirect users to the articles in the online documentation at docs.intersystems.com.

I want to insert multiple records in the table using below queries, but it gives an error.

Hi All, 

So after finally getting cache to install (by enabling root user and disabling the gatekeeper) it tells me that it has started with one alert... that is "Private web server has not started after 5 seconds." - urgh!

Obviously i need access to the management portal to continue setup, I've done lots of googling but i cant find anything on this, does anyone have any ideas?

Many thanks, 

Dan

when ever I pull the xml file from business services and its failed in business process and I am getting the below error. ERROR ErrPreviouslyCrashedMessage: Message '117' crashed previously.

In a HTTP operation, which extends Ens.BusinessOperation, EnsLib.REST.Operation, one can read the component's AlertGroups property by simply referring to it with "..":

set AlertGroup =  ..AlertGroups
//Do something with AlertGroup

"AlertGroups" is a property of Ens.Host. The above however does not work in a business process which Extends Ens.BusinessProcessBPL which extends Ens.BusinessProcess which extends Ens.Host. Can this property be read from inside the business process and what would the syntax

How do you cancel a query that is executing in the Management Portal  > System  >  SQL?

Does closing the browser cancel the query or does it continue to run in the background?

Is there any added benefit to using the Shell over the Portal? Perhaps there is a way to cancel/stop a query here?

$SYSTEM.SQL.Shell()

  Thanks

My Ensemble instance is reporting its status through SNMP in Dutch even though my system language is English. Can I change Ensemble's locale somewhere in the Management Portal?

I would like to Compact globals in a database to free up space.   

I would begin the process on Saturday morning, but am concerned, due to the size, that it would not complete by Sunday evening.  I understand that the process is setup so that it can run with users on the system, however, as the advice indicates, this would not be ideal.

Can the process be stopped if it does not complete by the time you want/need it to?

Do you know how to guestimate how long the process would take?

This is the Freespace for the database in question.  There are 1047 globals of which one of them takes up 50%.

Hi there

I've noticed extreme slowness using the portal in my Healthconnect dev enviroment lately.

Any page in the Portal takes a lot of time Loading.

Any ideas of what it could be?

Kind Regards,

Joao

InterSystems Online Learning has updated courses to include the latest information about InterSystems IRIS. See descriptions below, and try a course today!

Troubleshooting Productions
Get an introduction to troubleshooting productions, with a focus on locating and understanding some of the key Management Portal pages when troubleshooting.

DTL Basics
Learn how to create data transformations using the graphical interface in the Management Portal. You'll also see how to map fields, use functions to modify the fields and use literals as values for the fields.

In System Management Portal, I'm on UnknownUser (which I've accidentally removed the %All role from), so I log out of UnknownUser and try to log in as root or Admin, but only see the following screen: 

Hello,

How should I go about it to add a page to the EnsPortal? I want to display a dashboard like page and I would like to be able to have it accessible from Management Portal. I hope there is a better way than typing the URL in address bar. Is the menu for Management Portal editable?

Thanks,

Oliver

Hello,

When i click on the menu to  run the  Data import wizard  from MP, i receive following CSP error

It is happening for all the namespaces. Looks like some permission issue.  Same issue with Data Export wizard. Help to resolve this will be appreciated.

I am using

Cache for Windows (x86-64) 2017.2.2 (Build 865_0_18763U)

Thanks,

Jimmy Christian.

Hi all, 

I am trying to create multiple tasks all in a single task. 

For instance MyApp has three tasks.

One to send a email if a limit is exceeded = MyApp-check-credits

One to purge files = MyApp-purge

One to auto delete files = MyApp-Del 

I would love to get all tasks MyApp-check-credits, MyApp-purge, MyApp-Del into a single parent task called MyApp-AllTasks.

Is there anyone that could give me guidance of how to complete this it would be much appreciated. 

So i'm having this problem with the task manager, the tasks simply stopped running. I had a problem with queued massages and trying to figure out what to do i'm afraid I may messed up something else, can someone help me ?

I have an above error when purging record map batches and was wondering if anyone  out there has ever experienced this and if they have please any advice

Failed to purge body for header 9747192, BodyClassname='******.Batch':ERROR #5823: Cannot delete object, referenced by '*****.Record.%ParentBatch'