#Management Portal

Hi Team, 

Is there any way to disable all operation ( or services) in a production entirely? 

For example when restoring from one HealthShare environment to another we may need to get the configs (IP, port, ssl etc ) updated before staring the operation. We set the production autostart to disabled but still need to disable the operation one by one if we want to start production without operations enabled.  

Thank you for your help. 

It is probably somewhere in the doc. So hard to search. Hope InterSystems going to AI on their community/support data. 

How to see a meaningful value in management portal - sql explorer. For instance
Class MySetting Extends %Persistent{
     Property Name As %String;

Class MyObj Extends %Persistent{
    Property Setting As MySetting;

When browsing MyObj in management portal (just select * from MyObj - lazy to do a join), I will see 1,2.. values in the Setting column. I would like to see the Name. I do not want index MySetting with Name as primary as the name can change

Thank for your comment.

Introduction

There is a Link Procedure Wizard option within the Management Portal (System > SQL >Wizards > Link Procedure) which I had reliability issues with so I decided to use this solution instead.

Problem

You need to query an external SQL database to use the response within a namespace. This guide is assuming that you already have a working stored procedure in SSMS although you could instead use a SQL block within the operation. Stored procedures in SSMS are preferred to maintain integrity, Embedded SQL can get very confusing if you have a complicated SQL statement.

When I try to run Interoperability -> Interface Maps in 2022.1 on a very large namespace, I keep getting timeout errors. Even though I add filtering by Category, Text Search, etc... it still errors out no matter what. However if it is ran in one of our smaller namespaces it runs just fine. WRC told us the namespace is too big, however that should not matter on how many services, processes, and operations you have running. 

• Has anyone had this issue with Interoperability - Interface Maps timing out because of the size of the namespace?
• Does anyone have a way around

How to send the HL7 Batch messages over a SOAP webservice which takes 3 credentials(Username, Password& Org.ID) using IRIS Management Portal V 2019.1?

WSDL   xsd : element - 1.Username , 2.Password ,3.Org.ID ,4.HL7 Message.

Info I had -  

Source is CSV File will be translated to HL7 using data Transformations. All the transformed messages need to be sent to destination System through SOAP request as a single Batch File.

Challenge faced was - How to send the request message (Message Structure asked : Username , Password, Org.ID and HL7 message )in batch transformation.

Sometimes we need to convert FHIR message to HL7 V2, e.g. to register a patient to the PACS system.
In this article, I will explain the steps to achieve the desired by using IRIS FHIR Server production.

Below are the steps we need to follow:

1. Make sure FHIRServer production is started.
2. Register Business Service with FHIRServer endpoint.
3. Define Business Processes to convert FHIR message to SDA and then Convert SDA to HL7 v2.
4. Post JSON resource to FHIRServer endpoint and get HL7 V2 response.

Let's review the steps in detail.
 

Step 1. Make sure FHIRServer production is started

Open the production page and make sure Production is started. In the next step, we need to make sure business service HS.FHIRServer.Interop.Service is registered with FHIRServer

Hi Team,

I am not able to login to the Management Portal. I have used default password for _SYSTEM and Admin but still getting Access Denied.

Please help me.

Thanks,

Abhshek

InterSystems FAQ rubric

You can set the maximum size of the IRISTemp database at IRIS startup by setting a configuration parameter called MaxIRISTempSizeAtStart.

After setting, the system will truncate IRISTemp to the set value (MB) at the next IRIS startup. If the current size is less than the specified MaxIRISTempSizeAtStart, no truncation will occur. Also, if 0 is specified, truncation will not be performed, so the size will start without changing. (Default) Settings are made from the menu below.

We are successfully using System Default Settings to manage differences in settings across environments where the production and underlying code are otherwise identical. However, the TestingEnabled and LogGeneralTraceEvents settings don't appear to be settable via this mechanism. While we appear to be able to set them on the SDS page, they do not show up as selectable when resetting the settings on the Production Settings tab in the management portal - see screenshots below.

Following the documentation to insert into tableA from tableB in the SQL query box from the Management Portal :

INSERT INTO tableA (col1, col2)
SELECT col1, col2
FROM tableB

This straightforward query raises the following error :

Error #5475: routine compilation error : %sqlcq.TESTuNAMESPACE.cls305. Errors: %sqlcq.TESTuNAMESPACE.cls305.cls
ERROR: %sqlcq.TESTuNAMESPACE.csl305.1(14) :
<UNDEFINED>parseExtFrom+19^%qaqcmx
*mt("f", "1^TABLEA") :

Could someone help me decipher this error message ? Thanks for your help.

It appears to be working correctly, mirroring data etc. but the status on the Primary Cache DB is showing the wrong status for the DR DB.

 re-configured Cache Mirroring BUt  still have the same issue afterwards.

The GUI display remains the same regardless.

Hello to all developers and IRIS users. I am submitting to the competition a project for an alternative IRIS management portal that I have long wanted to create. The project was implemented on the Django framework and the intersystems_irispython-3.2.0-py3-none-any.whl library using native IRIS. The Django project is integrated with the telegram messenger and can be launched from a docker container or directly. To run it, you need to create a .env file in the project root for which you can use the .env_example example.

DJANGO_DEBUG=True
DATABASE_URL=sqlite:///db.

Hi Everyone

I'm just wondering if anyone might have a list (or the experience to make a list) of the most often used / useful Reply Code Actions?

In the Help section of Health Connect Management Portal, it lists 

'E=F' and ':?R=RF,:?E=S,:~=S,:?A=C,:*=S,:I?=W,:T?=C'

as the default options, though I'm curious if anyone else has found other codes or strings of codes useful?

Thanks in advance. 

Best wishes

Robert

I have enabled Audit in Portal for monitoring license usage. 

When the system is under load, this event appears quite often :  

It does not seems to cause issue with licensing , still, I am wondering why it's there and how it works (what cause such events).

After some tests (on a non production environment, not under load), here is what I have found out :

• this event can occurs when accessing static resources like a CSS or JS file. I don't get that.

In the discussions at https://community.intersystems.com/post/intersystems-studio-deprecated-starting-20232 one notable topic has been that some Studio users make regular use of its facilities for exporting multiple code artifacts (e.g. classes and routines) into a single XML file on the workstation, then exporting that file into a different server namespace.

Unless / until equivalent features are added to the VS Code ObjectScript extension, can these people fill the gap by using the System Explorer section of Management Portal?

There is several classes that allow to create TCP/IP connections (eg: to connect to a service).

Example : %Net.FtpSession (port 21), %Net.HttpRequest (usually port 80 or 443)

AFAIK connection will stay open unless closed explicitly or if variable that hold the instance is garbage collected.

Is there a way to get a list of all active (open) TCP/IP connections IRIS is maintaining so far ?

I took a look at Portal (eg: in dashboard, "System Resource Statistics") but couldn't find anything. Web Gateway panel provide information about connections but this is incoming connections for CSP pages.

Good day,

Is there a way to change the theme in management portal? or at least the color of the header.

Issue is, some users have access to Development and Testing and Production environments. I would like a way to color-differentiate the environments to reduce the errors. 

Are you all ready for something you wish you knew ages ago (or, in my case, a DECADE ago)?  Open up a portal in your favorite instance and go to:

System Administration->Configuration->Additional Settings->Startup

Scroll down to "Terminal Prompt" and click 'Edit'.  This allows you to edit what you see on your terminal prompt.  You can change that to my current setting: 8,3,2

What does this do?  It adds your instance name for your prompt.

I want to get SOAP Location details dynamically from Management portal using Property value?

Is there any idea to get it? Any example please?

what happened is, I selected a user to investigate their entries. I didn't enter a start date.

After hitting search, the query timed out, (or i cancelled it, I don't recall).

Now, when I go to that page, the browser processes and nothing is displayed.

I cleared my browser's cache, and I still get a blank page.

I'm running on Win10.

I use Chrome as my default browser. The problem also happens in Fire Fox.

i can log in as a different user and the page displays as expected.

How can I correct this situation?

Thanks!

Hi,
i got 2 server with iris instances on them:

srv1
irisinstance1 port 51773/52773
irisinstance2 port 51774/52774

srv2
irisinstance3 port 51773/52773
irisinstance4 port 51774/52774

Both of them have apps published on an external apache on port 443 and i would like to publish irisinstance1 and irisinstance2 on port 443 of srv2.

Something like https://srv2/mgmt1/csp/sys/UtilHome.csp and similar to mgmt2.

I've tried with proxypass without luck.

How can i do that? Is there a guide?

Thanks!

Hi All.

Had an empty Ensemble namespace (interoperability enabled) which the customer had requested renaming before beginning development, so was wondering about best practice to achieve this.

I saw on the docs (https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…) that this can be done with management portal and terminal commands but it seemed simpler to just create a new namespace and delete the old. The way I did this was to create a new namespace using 'Copy from' the existing, then delete the old one.

my questions are:

1.

Hello InterSystems HL7 Community,

InterSystems Certification is developing a certification exam for InterSystems HL7 interface specialists and, if you match the exam candidate description given below, we would like you to beta test the exam. The dates the exam will be available for beta testing are March 28 - April 30, 2023. Interested beta testers should sign up now by emailing certification@intersystems.com (see below for more details). 

Note: The InterSystems HL7 Interface Specialist certification exam is version 2.

On a developer's laptop, having had two or three Ensemble installs with different settings/config changes made, and encountering unexplained errors compiling classes, wanting to scrub as much of the previous installs off the machine before doing any fresh installation... But can't find clear documentation on doing a complete uninstall!

Have stopped the server.

Am I safe to remove C:\InterSystems\Ensemble (for the instance installed into that folder)?

What other files/Registry/locations contain references to an Ensemble install, and are there tools or documentation on clearing those

I followed the instructions to setup the Port Authority Report in our new IRIS instances, but noticed if I tell it to run every hour I am getting the following error message...

Here is how the report is setup...

Has anyone run into this issue? If so how do you resolve it?

Please and thanks

Hey all,

I'm trying to enable an existing namespace to be Ensemble enabled by doing the command do ##class(%EnsembleMgr).EnableNamespac($namespace,1), but I'm still getting the error message. Is there something that I'm missing? 

I've attempted to reboot the server and even went incognito to see if it was a caching issue, but I'm still not able to create an Ensemble production in that namespace.

When I do a write ##class(%EnsembleMgr).IsEnsembleInstalled() it returns a 1. The same goes for the command write ##class(%EnsembleMgr).IsEnsembleNamespace().

To prepare a migration to IRIS I use Docker images.
The (aged) application is built around Caché Terminal
And on Windows,  IRIS uses the same ctelnetd.exe as Caché.

In my Docker installation, Telnet Settings are just grayed out in SMP.
and my Terminal can't 'connect.
Port mapping is OK and verified with TCP

Working from the console in Docker  with the whole set of ESC and
screen formatting is not acceptable.
We tried WebTerminal but there is just no Partition behind as in Terminal.

How can I switch on Telnet support in the Docker image?
 

Where are the SQL Show History entries for each user stored?

I want to grant access to view the Error Trap in System Management Portal to certain admins, without giving them access to anything that would alter Caché behavior, such as users or database sizes.  I was looking for a granular Resource that would do this, but haven't been able to find what I'm looking for.

Secondly, I granted %Developer role to my developers, but they don't appear to be able to use custom menus in Cache Studio until I grant them %All. Is there a granular Resource that I could use to add to a custom Role and grant to them that would allow custom menus in Cache Studio?

I am trying to make application deployable using Installation Manifest.

I use IRISHealth_Community-2022.2.0.368.0-win_x64.exe to run manifest during installation

I run it from windows command line using the following command:

IRISHealth_Community-2022.2.0.368.0-win_x64.exe INSTALLERMANIFEST="C:\FixxerInstall\src\Installer.xml" INSTALLERMANIFESTLOGFILE="Log.txt" INSTALLERMANIFESTLOGLEVEL=3 INSTALLERMANIFESTPARAMS="FlaggerCSPDir=C:\FixxerInstall\src\csp\flagger,ClassImportDir=C:\FixxerInstall\src\import\"

It works but a little bit strange.

I try to create csp application using manifest.