Hi all, This is a bit embarrassing, and not that critical.  I have a local instance of Caché 2016 on my computer, for playing around with.  I was attempting to set up two-factor authentication on this instance, and I thought I simply disabled all users except for my own user and enabled two-factor for this user.  The next time I tried to login to the Management portal, I received a Server Availability Error:

http://localhost:57772/csp/sys/UtilHome.csp

00
0 9 1,691

Hi,

I'm unable to locate a set of instructions that would allow me to encrypt the traffic to/from the Cache' Management Portal (that is - run it over HTTPS)

I am referring to the Management portal as hosted by the private Apache Web server instance installed with Cache. (I know how to do this for regular web sites hosted on, for example, IIS).

 

I would imagine the steps would involve, (a) enable SSL on that apache instance and (b) deploy certificates into the Apache web server.

Does anyone have a step-by-step guide on how this is accomplished ?

00
0 6 1,262

Hello Community,

I recently encountered a issue with Caché and I can't figure out where the problem is coming from.

I noticed that the license limit (200)  was reached whenever I was opening my Studio (so it seems). When this occurs, I restart Caché (with the Cube in the Taskbar), and the number of license used is back to 1%, but grows back after.  The time taken before the number of license  grows back again looks pretty random.

Here is a couple of screenshots :

00
0 7 1,256
Importance and Collection of Exact Version Information ($zv / $zversion)
 
The explanation of:
- why collecting $zv is important (The WHY),
- what the components of $zv mean (The WHAT),
- and how to collect $zv (The HOW). 
(The Ultimate $zv Guide to the ISC Galaxy in large, friendly letters)
130
1 4 1,062

Are you all ready for something you wish you knew ages ago (or, in my case, a DECADE ago)?  Open up a portal in your favorite instance and go to:

System Administration->Configuration->Additional Settings->Startup

Scroll down to "Terminal Prompt" and click 'Edit'.  This allows you to edit what you see on your terminal prompt.  You can change that to my current setting: 8,3,2

What does this do?  It adds your instance name for your prompt.  So now your prompt can look like:

DEVELOPMENT:USER>

120
1 11 996

As some customers recently received new license keys, I received some questions why their new license does not seem to work, other than the expiration date being reached. So far I was able to solve all of them with this short list of things to look at.

1. Is the date on your laptop set properly?

20
0 5 923

I am looking for a database management tool I would have expected to find something like on the SMP website

 

Aim

show current database usage (ie size allocation) by database then table etc and allow continued drill down,

show information as a table, so can then sort by size to find the biggest item easily

also show it graphically

 

And then have ability to track and trend growth in size over time

identify a normal growth pattern

alert if variation (higher or lower) from normal based on recent trend

 

00
0 2 874

I have a cache client with a list of several servers.

One of the server is working with an IIS server that is not the Cache DB server.

The connection to the IIS server is only through https (SSL)

I tried to define the Web Server IP Address to https://some.server.name but it didn't let me to specify the https

So I tried to define Web Server Port to 443 but when I chose the SMP it's trying to open http://some.server.name:443/csp/sys/UtilHome.csp

10
0 10 732

Currently, we are utilizing batch jobs at the OS level to kick off routines that watch for files. We are trying to convert these processes to be performed by the Task Manager.

The routines have while loops and perform while loops so long as the time parameters are being met.

What's the best way to ensure Task Manager kicks them off after the completion of the shutdown/backup/start process is performed, which we do nightly? I want to ensure that it starts it regardless of the time that we've set.

00
0 13 596

I know %CSP.Daemon is supposed to clean up old CSP sessions (?).  In my management portal, under System/ License Usage, I see 33 "Units" used (and there are 33 licenses  in use), but usernames from old IP address and that are not being  used.  Their active times are often in the millions of seconds.  They are not "on" the system right now.  

 

At most, only 3 users are on the system right now.

 

Are these supposed to be cleaned up?  Can I clean them up programmactially, and how would I know if they're not active?

Thanks,

Laura

 

 

00
0 8 522

Dear InterSystems Community! Do you control your Caché or Caché controls you?

Recently, I decided to start the project about control of Caché instance. The control is based on communication with chat bot.

For example, below text message shows current statistics of the certain Cache instance.

/stat <cache-instance>

00
0 9 496

This article contains the tutorial document for a Global Summit academy session on Text Categorization and provides a helpful starting point to learn about Text Categorization and how iKnow can help you to implement Text Categorization models. This document was originally prepared by Kerry Kirkham and Max Vershinin and should work based on the sample data provided in the SAMPLES namespace.

40
0 0 494

Recently, we scheduled two tasks (1008 and 1009) within Task Manager. Task ID 1008 is set to run after Purge Tasks (%SYS-ID:3), and Task 1009 is set to run at 7:00:00 each day.

In attempt to provide as much detail as possible, each of the tasks are as follows:

  • Task 1008

    WHILE (($p($h,",",2) < $ZTH("10:00 PM")) && ($P($g(^Task.1008(+$h,$j)),"^",1) = +$h)) { J ^ROUTINE, ^ROUTINE2 D SUB^ROUTINE3 H 5 }

00
0 4 458
Question
Scott Roth · May 9, 2016
Production Monitor

At the Global Summit several folks had mention that they developed their own production monitor. I am looking to create a monitor similar to eGate that we only display those Services/Processes/Operations that are in trouble, and those Errors that are showing up in the Event Log. Does anyone have any examples of this?

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

00
1 3 428

Hi Folks,

I would like to visulaize the tables and data on Power BI, so I try to connect the romote server to Power BI to access the tables and data of remote server. I can able to connect that remote server to our Studio also able to view class files. 
But I couldn't able to connect the remote server to power BI. I'm getting the below error while click on the tables 

"Expression.Error: This native database query isn't currently supported" 

00
0 5 422

My boss would like to change the Ensemble logo that one sees in the mangement portal, because it's part of the DeepSee Anaylzer.  

 

I can see where it lives on the generated html.  

I kow that you can set the logo for the User POrtal settings in DeepSee -- you can specifiy a URL for your logo.  But we'd like to go one stee further and change the Ensemble by InterSystems to our own logo / company name.  

Is it possible to change this in the code?  Is there a Configuration setting to change this?

Thanks,

Laura

00
0 11 388
Question
Benjamin Eriksson · Feb 26, 2016
No Namespaces found

Hello! 

I'm trying to use iKnow but I get the following error "No iKnow-enabled namespaces found" in the Management Portal.

It was working on the 2015.2.2 version but now on 2016.2.0 it doesn't. I very new to Caché and iKnow so it's probably a simple problem. 

I was able to create a iKnow domain using the terminal and I can view it in the learning portal (http://localhost:57772/csp/sys/exp/_iKnow.UI.IndexingResults.zen).

00
0 2 359