Hi All,

I have SourceControl utility class as in sys namespace

 Class %MW.Web Extends %CSP.Page {... }

Previously with Cache 2010.1 and below  there was no problem accessing it through

localhost:57772:/csp/myns/%MW.Web.cls

But now with newer version at least with  2016.2  I' ll get Forbidden message from it.

With Web Gateway HTTP Trace Facility 

GET /csp/ipanax2/%MW.Web.cls HTTP/1.1  

​-->  HTTP/1.1 403 Forbidden  

How can we make it accessible again? 
 

 Mikko

Hi All,Can you please any one tell me how to find the last compilation date of routine.

Running TuneTable accounts among other the parameter named Block Count. In documentation, we see that this is an approximate numbers of 2K-blocks in which SQL-maps are stored. Databases in recent Cache doesn't support 2K-physical blocks so SQL-blocks are not physical blocks as it seems. So two questions:

- what are these blocks?

- how knowledge about count of blocks can help in SQL optimization?

Thanks for intelligent answer to stupid questions!

My SOAP Operation is returning an error "ERROR ErrBusinessDispatchNameNotRegistered: Business dispatch name 'PKB_SOAP_Sender' is not registered to run"

How to I resolve this?

The DeepSee TroubleShooting Guide helps you track down and fix problems occurring in your DeepSee project. A common problem is finding less records than expected in a DeepSee Cube or a related Subject Area. The DeepSee TroubleShooting Guide suggests starting your investigation by checking the following:

Check cube for build restrictions

Check if maxFacts is used

Check if Build Errors are occurring

A new Health Connect customer has a few experienced Java folks on their interface team. As they get more into Health Connect and learn Caché ObjectScript they thought it would be useful to have a list of common Java statements with an equivalent statement in ObjectScript. They mentioned string manipulation as an example, but would be interested in other areas as well.
 
This seems like something that is probably already floating around somewhere. Does anyone have something like this or other "COS jumpstart for Java devs" materials?
Thanks,
Marc

Question:

Where can I find the openssl command line tool for Windows?

Answer:

The openssl command line utility comes with Unix, but not with Windows. It is used for working with security certificates.

The main site is

https://www.openssl.org/

There are no binaries on this site but in the Community section there is a link for binaries which leads to:

https://www.openssl.org/community/binaries.html

This contains a link to "An informal list of third party engines":

https://wiki.openssl.org/index.php/Binaries

At the time of writing this had two entries for OpenSSL for Windows.

I'm working on a REST service which will include a binary stream as a request property. I'm currently encoding the stream as BASE64 and passing it as a string value, but I was wondering if there is anything in the Caché JSON support that may be a better fit for encoding this data? Thanks Chris

Lets say i have a record "Person". If i want to access the "Name" property of that object which one of the following best option performance wise

1. Option 1

set record = ##class(Test.Person).%OpenId(1)

write record.Name

2. Option 2

 write ##class(Test.Person).NameGetStored(1)

Microsoft Office has components for using in third party applications: COM Objects for C++ and Interop Assemblies for .Net programming.

Many Cache projects used to include calls to those libraries. However, recently this solution started being problematic.

There are two main reasons - legal and technical. Let’s check the details.

Microsoft technology support

Microsoft is supporting Office Automation only for desktop computing. 

It shall not be used for server computing, as they offer Sharepoint for this scenario.

Recently I wrote about automatic removal of system methods from the codebase.

Today, I'm ready to present you a working solution (codename: SMR) for this task.

Hi all,

We've found that in most cases when we open a new CSP session the CGI varaiable %CGIEVAR("HTTP_COOKIE") contains the client name.

It looks like that : "state=SYSADM%3A0; Username=Urish; CSPWSERVERID=Cache for Windows (x86-64) 2013.1.1 (Build 501_1_13062) Sun Aug 11..."
In some other cases this CGI only contains  $zv - like "CSPWSERVERID=Cache for Windows (x86-64) 2013.1.1 (Build 501_1_13062) Sun Aug 11 2013 23:20:33 EDT"

We are searching for a way to get the username (we need to stop using activex controls, like WScript.Network--> dNE

Index

This is a list of all the posts in the Data Platforms’ capacity planning and performance series in order. Also a general list of my other posts. I will update as new posts in the series are added.

You will notice that I wrote some posts before IRIS was released and refer to Caché. I will revisit the posts over time, but in the meantime, Generally, the advice for configuration is the same for Caché and IRIS. Some command names may have changed; the most obvious example is that anywhere you see the ^pButtons command, you can replace it with ^SystemPerformance.

We are trying to understand how websocket connections from a javascript client may timeout in cache. Does anyone know if and of the session timeout or any other timeouts apply to any synchronous websocket connections? I have not been able to prove that they do timeout at all.

Hi,

I have a requirement to convert uname -n (Unix comamnd) with its equivalent Cache class. Can anyone help on this please

Thanks & Regards,

Sadagopan TS

I tried using the DeepSee Troubleshooting guide but the suggestions weren't working.  Let's say that the source data we are using to build the cube on has a value out of range. This would cause the cube build/update to fail. How do I see the error log that explains which field has the value out of range? Please be detailed on exactly what command I should enter and where I should enter it in.

I assume that I go into a terminal session and to the correct namespace that we are building/updating the cube on, but the DeepSee Troubleshooting guide doesn't give that detail.

This article explains the basics of OpenVMS file structures, from a Caché prospective, and what you need to know to read and write any OpenVMS file with Caché, even the files with difficult file structures.

On UNIX and Windows all files are just a stream of octets (eight-bit bytes). Assigning meaning to those octets is done entirely by convention. Those conventions are rather simple, even if slightly different on UNIX and Windows.

Hi All,

We are accessing the InterSystems`s cache database via UNIX ODBC and displaying the data in PHP website . Recently we have upgraded the PHP version to 5.6.  We are getting the nondisplayable characters (�) for only strings. But the numbers and date fields are displaying correctly. 

While querying the database via ISQL everything working fine (No Special characters).

I have looked around the internet and found the PHP 5.6 changed the default character to UTF-8.

For this issue anything, we can do from cache side.

cache version :

Cache for Windows (x86-32) 2016.

Is there any alternate way to run .exe in Ensemble without using $zf command?

Hi All,

We are accessing the InterSystems`s cache database via UNIX ODBC and displaying the data in PHP website . Recently we have upgraded the PHP version to 5.6.  We are getting the nondisplayable characters (�) for only strings. But the numbers and date fields are displaying correctly. 

While querying the database via ISQL everything working fine (No Special characters).

I have looked around the internet and found the PHP 5.6 changed the default character to UTF-8.

For this issue anything, we can do from cache side.

Thanks in advance.

Hello, I would like to know if CACHE has any limitations on uploading files.
Why am I asking this, why am I going through a problem here.
What happens is that when uploading files or images that are larger than 2.7 MB CACHE is limiting the size to 2.7 MB, any file larger than that is saved corrupted.
Already at the time of uploading the file or image, CACHE is limiting the size of the file to 2.6 MB.

Hi,

I have a requirement to replace $ZF("%ZSET_DIR","/hold/rsm") to its equivalent Cache Class. The $ZF("%ZSET_DIR") sets the Current folder equivalent to "cd" command in Unix.

Can anyone help on this, please

Thanks & Regards,

Sadagopan TS

If you spend a lot of time working with javascript, json and html and you are new to Eclipse / Atelier you may like this tip. 

 Instead of the default Atelier HTML you can install a JS plugin for eclipse which works quite good handling javascript files, allowing you to see functions, color syntax, etc. The one I used is the JSDT.

I tried to make atelier look more like XCODE with this simple trick or tip: change the default font to SF Mono and size 14.

To do it I did:

1) Install SF Mono font in the system which is the default font for XCODE and needs to be installed in order to use it.

You can find it in: /Applications/Utilities/Terminal.app/Contents/Resources/Fonts

Double Click SFMono-Regular.otf file and install it. You will get a warning of "serious problems" but it will work all right.

2) Then, in Atelier, go to Preferences / General / Appearance / Color and Fonts The choose Text Font (In Basics category) and Edit.

Hi Everyone,

         I have frequently received this below error message in my ensemble 2009 Cconsole log.

         " 11/08-13:05:06:114 (9784) 2 Skipping SET due to compare and swap failed on ^["^^e:\test\data\"]Debug("CalcTotal1") for records in e:\test\data\ addr=39745548 "

        Please explain this, am very much trouble with this alert. And also want to know it will cause any system hangsup ?

please response quickly. Thanks

Archunan K.

I have an amazing tool called 7edit for editing and sending HL7 v2 messages.  I've searched hours for a similar tool for HL7v3 without luck.  They're all web based, crappy, broken links, etc.

Thanks for all replies in advance.  In monitoring our audit log we are getting the error below.  We have 4 different servers running CACHE  2014.1.1 and this is happening on all 4 of them.  I have not been able to find what process is trying to logon but it is happening every 30 minutes.  We have no user processes that are running so this has to be a CACHE process.  Does anyone have an Ideal what could be running to cause this?  What kind of trace can I run to determine what process is running it?

I need to catch the user using a bookmark to get into the application in the 'middle'; i.e. the user is getting into the application not  at the home page.  I've tried OnPreHTTP to redirect, but I can't catch the new session, and it doesn't redirect.

How can you redirect to the home page upon login?

Thanks,

Laura

Hi,

Currently i am building a CSP application using Intersystems cache to automate few tasks in Ensemble. Basically, I have 2 .csp class files, file1.CSP and file2.CSP in namespaces namespace1 and namespace2 respectively. On satisfaction of a condition I forward the request from file1.csp to file2.csp. while forwarding it prompts me to enter the log-in credentials again as the second .csp file is in a different namespace. Is there any way i can bypass the login screen while forwarding the request from 1 csp to another (as i am using the same credentials for both the namespaces) ?