Article
Robert Cemper · Jul 4, 2020 2m read
Terminal Multi-Line Command Editor

The Command extension enables the execution of Multi-Line Commands from Terminal prompt.

Terminal Multi-Line Input with Edit, Insert, Delete, Print extension for IRIS and Caché
IRIS and Caché have just single command lines in terminal available
This Multi-Line Commands Editor also will execute the Multi-line Commands.
In addition, it is independent of access to %SYS and can be installed in any namespace

Special thanks to @Jeffrey Drumm  who inspired me to this and supported me as beta-tester.

80
0 1 304

Hi Community! 

I'm sharing a little tool (REST service) to download interoperability messages from your browser.

You only need to:
1. Create a web application in Management Portal (e.g. /downloadmsg) and set DispatchClass=Util.DownloadMsg.
2. Call the tool using your browser passing the namespace and the message header id to download.
http://localhost:52773/downloadmsg/ns/mydev/msgid/17441

00
0 0 58

Hello, developers!

I would like to share the history of the project - the ZAPM shell.

As soon as ZPM was implemented, I immediately began to think about how best to use it.

And immediately faced with the desire to move more quickly between namespaces, especially when there are more than 20 of them.
I had to leave the ZPM, move to the desired namespace and re-enter the shell.
I suggested an improvement - a new "namespace" command for easier navigation.
I didn’t wait - I did it myself. And so it went. If you need it, get ready to do it yourself.

40
0 0 95

Introduction

We are in the age of the multiplatform economy and APIs are the "glue" in this digital scenario. Since they are so important, they are seen by developers as a service or product to be consumed. Therefore, usage experience is a crucial factor for its success.

40
2 2 146

Hi Community,
 
OpenAPI-Client Gen has just released, this is an application to create an IRIS Interoperability Production client from Swagger 2.0 specification.
 
Instead of the existing tool ^%REST that creates a server-side REST application, OpenAPI-Client Gen creates a complete REST Interoperability Production client template.

 

Install by ZPM:

50
0 7 228
Article
Robert Cemper · Jul 27, 2020 3m read
ZPMshow - a helper for tired fingers
This is a coding example working on IRIS 2020.2 
It will not be kept in sync with new versions 
It is also NOT serviced by InterSystems Support !

A helper to List, Install, Uninstall ZPM packages

The offer of ZPM is growing daily and the short names and
acronyms of the offer are sometimes hard to understand and
also hard to type with my lazy fingers.

Video

120
0 4 201
Article
Robert Cemper · Jul 21, 2020 2m read
Un-Typical persistence
This is a coding example working on Caché 2018.1.3 and IRIS 2020.2 
It will not be kept in sync with new versions 
It is also NOT serviced by InterSystems Support !

During my search for a snapshot of a persistent object,
I met a feature that I would like tho share as it could be useful in some special situations.
My trigger was to have a before- and an after-image during unit testing.

120
4 4 338
This is a coding example working on Caché 2018.1.3 and IRIS 2020.2 
It will not be kept in sync with new versions 
It is also NOT serviced by InterSystems Support !

It is also an example of a customized command extension (ZZJSN) in Caché / Ensemble & IRIS

This is the Caché version for fast JSON formatting. But iIt also works in IRIS .  
To allow parallel existence in IRIS with the previous example this is named ZZJSN

50
0 0 128
Article
Robert Cemper · Jul 20, 2020 2m read
SPOOL as SQL Table

 

This is a coding example working on Caché 2018.1.3 and IRIS 2020.2 
It will not be kept in sync with new versions 
It is also NOT serviced by InterSystems Support !

Background

Device #2 named SPOOL dates back to the predecessors of Caché and IRIS
It was the first "%Stream" like option to buffer output before printing.
It is also the first and still today the most simple way of output redirection.

110
0 0 153

Wrap JSON to multi lines / Test ISJSON

   This is a coding example working on Caché 2018.1.3 and IRIS 2020.2
   It will not be kept in sync with new versions   
   It is also NOT serviced by InterSystems Support !

install and usage

Packed Pretty.xml installs routine ZPretty in any namespace.
calling $$Do^ZPretty(input,[filler],[newline]) returns a wrapped JSON string.
filler is the optional string for the indent, default = "  "
newline is optional, default = $C(13,10)
input accepts: JSON_String, JSON_Stream, %DynamicAbstractObject

60
0 0 146
Article
Robert Cemper · Jun 25, 2020 12m read
Backport %JSON.* to Caché

Attention:

This is a coding example working on Caché 2018.1.3
It will not be kept in sync with new versions 
It is also NOT serviced by InterSystems Support !

Full backport from IRIS for Windows (x86-64) 2020.1 (Build 215U) Mon Mar 30 2020 20:14:33 EDT

IRIS brought us an excellent %JSON.Package
It is an essential component of the Project Manager (ZPM)
This backport makes it available also in Caché and builds a base to eventually backport also ZPM.

140
0 5 250
Article
Robert Cemper · Jul 4, 2020 4m read
Editor Archaeology

During the development of the Terminal Multi-Line Command Editor I discovered in my IRIS installation
a piece of software that I just can classify as a historic artifact. And it is still fully operational !!!

As it dates back to times before InterSystems was founded in 1978 you may understand my surprise.
I personally stepped into that environment in 1978 and used it then for daily work.

160
0 5 199
Article
Oleh Dontsov · Jun 4, 2020 1m read
Easy data import into IRIS

Sometimes you need quickly and easily import data into IRIS. For this, an IRIS import manager has been developed.

This application allows you to import JSON data and also provides a really simple interface for transferring data from MongoDB collections to IRIS globals. It has never been so easy.

Let's look at examples.

Import JSON

20
0 5 230

While reviewing our documentation for our ^pButtons (in IRIS renamed as ^SystemPerformance) performance monitoring utility, a customer told me: "I understand all of this, but I wish it could be simpler… easier to define profiles, manage them etc.".

After this session I thought it would be a nice exercise to try and provide some easier human interface for this.

The first step in this was to wrap a class-based API to the existing pButtons routine.

I was also able to add some more "features" like showing what profiles are currently running, their time remaining to run, previously running processes and more.

The next step was to add on top of this API, a REST API class.

With this artifact (a pButtons REST API) in hand, one can go ahead and build a modern UI on top of that.

For example -

40
3 14 333
Article
Robert Cemper · May 14, 2020 2m read
IRIS-Docker-micro-Durability

During the development of a container-based demo I found the need to access a fresh docker
instance of IRIS image (e.g intersystems/iris-community:2020.2.0.199.0) over and over.
To bypass setting passwords and loading my code repeatedly I developed this workaround.

100
1 0 135

One of the topics that comes up often when managing Ensemble productions is disk space:

The database (the CACHE.DAT file) grows in a rate that was unexpected; or the Journal files build up at a fast pace; or the database grows continuously though the system has a scheduled purge of the Ensemble runtime data.

It would have been better if these kind of phenomena would have been observed and accounted for yet at the development and testing stage rather than on a live system.

For this purpose I created a basic framework that could aid in this task.

30
1 7 945

Suppose you have developed your own app with InterSystems technologies stack and now want to perform multiple deployments on the customers' side. During the development process you've composed a detailed installation guide for your application, because you need to not only import classes, but also fine-tune the environment according to your needs.
To address this specific task, InterSystems has created a special tool called %Installer. Read on to find out how to use it.

140
3 5 3,087

Now the Classes/Rutines/DeepSee files will be automatically exported to the working directory after saving or compiling and files will be automatically deleted .

Installation

To install isc-dev , you just need to download and import the file isc-dev.xml from last release.
Some ways to import isc-dev .xml file:

  • Go to Management Portal -> System Explorer -> Classes -> Import and select the XML file.
  • Drag the file over Studio.
  • Terminal command:
NS>do $system.OBJ.Load("yourpath/isc-dev.xml","ck")
NS>zpm
zpm: NS>install isc-dev

How to enable this feature:

  • After importing the class in the target namespace, run the following method to set up the working directory:
NS>do ##class(dev.code).workdir("/path/to/your/working/directory/src/")
  • Go to Management Portal -> System Administration -> Configuration -> Additional Settings -> Source Control.
  • Select the target namespace and set the dev.FileManExtension class as the main one and save it.
  • Try to create a new class in the studio and save/compile it
  • Enjoy!
20
1 1 175

Introduction

Despite the fact that InterSystems has long recommended using external backup tools, many users have opted to use the internal Online Backup facility, which is included in all distributions of InterSystems products (IRIS Data Platform, Caché, etc.). The reasons why are quite obvious:

100
2 0 219

Dasha.AI is a platform that allows you to create and manage voice interfaces for your applications. One of Dasha’s distinctive features is that most users believe they are talking to a human, not a robot.

Voice is the most natural way for people to interact. Dasha allows to use voice interface to interact with your application as naturally as communication between people.   

20
2 0 159

Over the last couple of weeks the Solution Architecture team has been working to finish off our 2019 workload: this included open-sourcing the Readmission Demo that was brought to HIMSS last year, so we could make it available to anyone looking for an interactive-way of exploring the tooling provided by IRIS.

 

50
0 0 311