#HealthShare

Hello All!

I'm brand new to HealthShare and trying to enable LDAP Authentication. When I run the authentication test, the base DN looks good and the search user is successfully authenticated. However, the user is still not found. We have a linux installation in Azure, and I'm connecting to a Windows AD server (provided both Azure and local hostnames). I'm using the full DN in the username field. For the "LDAP Unique search attribute" I've tried, CN, DN, and sAMAccountName.

Hi Everyone!

New session recording from Global Summit 2018 is available on InterSystems Developers YouTube Channel:

InterSystems Healthcare Showcase

Hi, 

It is sometimes undesirable to send a full demographic or results feed to departmental clinical systems, that only see a subset of the patients.

While some systems (paediatrics, maternity, geriatrics) can filter on patient demographics, a number of systems are for cohorts of patients that don't fit a particular criteria.

One of our system vendors has a patient index filter service that keeps a local index of relevant patient identifiers, and only forwards matching messages.

Hi There ,

     We are trying to do a small POC trying to integrate NHS Careconnect with Ensemble/Healthconnect. Does anyone have implemented this before. It would be good that you provide some suggestions  or any sample implementation. It would be good to get suggestions any  interesting use cases 

within NHS England for the POC.

Hi All,

I need to transfer the sub-directories and their contents from a SFTP server to a shared directory while maintaining the structure.

I can do it without maintaining the structure.

Best Regards.

Michel.

P.-S. : files are HL7 messages.

Hello everyone

I have a server configuration in a CSP Gateway installed on a PC (let's call it S2) different from the main one (let's call it S1). This configuration allows me to access a web application that is installed on S1, from a client C asking S2 for this webapp. But for now it works only in HTTP between C and S2, and we would like to use HTTPS (as it already works between S2 and S1).

First here are the tutos found in the doc:

https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KE…

https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?

We are pleased to announce the availability of HealthShare 2019.1.

Hi Community!

New video is already on InterSystems Developers YouTube Channel:

Implementing SSO for UI Integration

Hi -

I was wondering how if the "old FHIR gateway" works with the latest release of HealthShare Information Exchange. Since there is an impact on the amount of storage needed to use the "FHIR Gateway 2 which uses the Operation Data Store (ODS)", my question is how (if at all) can FHIR access to Information Exchange work without ODS?

Thanks

I am trying to base64 encode a string with non standard characters encoded in utf-8 also tried windows 1252  and I am getting error like so 

ERROR <Ens>ErrException: <ILLEGAL VALUE>zEncodeStream+18^ -- logged as '-' number - @' set encString = $TRANSLATE($SYSTEM.Encryption.Base64Encode(streamString),$C(10,13))' 

any help appreciated if anyone has faced this before

The 2019.1 version of HealthShare Health Connect is now Generally Available!

Kits and container images are available via the WRC download site 

The build number for these releases is 2019.1.0.510.0.18883

Health Connect 2019.1 includes many new features and capabilities, most notably:

• FHIR STU3 Support
• Java Business Hosts
• Managed File Transfer (MFT)
• Containerized and cloud deployment
• New interoperability capabilities that speed configuration and troubleshooting of productions

These are detailed in the documentation and release notes for Health Connect

Upgrades - Health Connect 2019.

Hello All,

Our Group currently has the following version of Healthshare, and Ensemble installed:

Cache for UNIX (Red Hat Enterprise Linux for x86-64) 2015.2.1 (Build 705U) Mon Aug 31 2015 16:53:38 EDT [HealthShare Modules:Core:14.01.7913 + Linkage Engine:14.0.7913 + Patient Index:14.0.7913 + Clinical Viewer:14.0.7913 + Active Analytics:14.01.7913]

We are planning on upgrading all of our instances from 2015.2.1 to the latest version (currently 2018) starting in May. 

These instances are responsible for receiving data (i.e.

Hope someone can help me,  so i was developing a script and during the tests I was using the csession to execute a method. Also i thought i had to stop the instance i was using, so I used the ccontrol stop [instanceName] to stop the instance, but when i restarted the instance i got this error trying to start my production, I have an idea of what's the problem but i don't know how to fix it.

ERRO <Ens>ErrException: <FILEFULL>zStartProduction+62^Ens.Director.1 ^Ens.Runtime("Name"),/hs-connect-hom/db/BPINTEGRADEV-GLB/ -- - registrado no log como '-' número - @' Set ^Ens.

We can load a CCDA xml document into SDA3 object.

Once parsing SDA3 object, how do we determine from which XPATH from CCDA the specific SDA3 elements were mapped to.

Is there any way?

Keywords:  Anaconda, Jupyter Notebook, Tensorflow GPU, Deep Learning,  Python 3 and HealthShare    

1. Purpose and Objectives

This "Part I" is a quick record on how to set up a "simple" but popular deep learning demo environment step-by-step with a Python 3 binding to a HealthShare 2017.2.1 instance .  I used a Win10 laptop at hand, but the approach works the same on MacOS and Linux.

Last week it was noticed that Python overtook Java by becoming the most popular language in PYPL Index  Tensorflow is a powerful computation engine, very popular in research and academic worlds too.

This is my first post, I have only been using Healthshare for a year.

We support multiple Healthshare test and development environments.  We are trying to come up with the best solution for building an environment from scratch, as well as incremental updates.  I am interested in hearing the pros and cons between using the Ensemble -> Export Production feature versus creating custom classes to do the install and setup.

At the moment we have custom classes (one for Access gateway, one for Registry, etc), that installs Healthshare and our custom settings using the %Installer tool.

I'm able to log into my local instance of HealthShare through the Management Portal, but once I've done so, the screen is entirely blank. I'm still able to access Terminal and Studio without any issue, as well as a hosted instance's Management Portal. I've tried stopping and starting HealthShare, no luck. I've been working on this instance for the past several months and haven't experienced anything like this, and I don't know of anything that I was doing that would have broken the Management Portal. Anyone have a suggestion as to where to go from here?

Hi Community,

I have to make a daily task (Job) which will run (7 am to 7 pm) in a day at an interval of 3 hours. Timings are as (7:00 am, 10:00 am,13:00 pm,16:00 pm,19:00 pm). But at each time when task will run i have to set a variables as per below condition

Sample:

1) If task run at 2019-03-19 07:00 am in morning

I  have to set two variables (start and end) whose value will become like this

(set starttime= 2019-03-09 07:00:00.00 and set endtime=2019-03-09 10:00:00.00)

2) But if task run at 2019-03-19 10:00 am in morning, the value should change as per below

(set starttime= 2019-03-09 10:00:00.

Hi community,

I have a rights problem when giving a user permission to perform some select queries on particular tables. So I have created a user with the following rights.

So this all works well. No problem so far. But the customer is using a program where you can easily build visually the query by selecting the table, choose the right colums etc. So the problem we have is when I give the user the Role %All the tables are shown.

And the user is allowed to query all tables.

Hi guys

I've added a new mirrored failover member to an existing one.

They are both Arbiter controlled.

When I do Add database to mirror on the primary I'm always getting an error. Missing Mirrored database.

I followed everything in the documentation and always get the same error.

I've copied the CACHE.dat file after umounting the database on both servers. then mounted them.

Could you help me out?

Kind Regards

What does Ens.Debug("LogETN") show and where are you see it in Management Portal? Does is show only errors, successful messages, etc?

Hi -

I'm trying to follow the documentation, but I seem to end up in a circular reference, where the docs say "Login to TrakCare" to get access to the Layout Editor, with a link to "Logging Into TrakCare", and then that whole sections assumes that the account being used has been created, but doesn't seem to point to any means of actually creating the account in the first place.

Where is it described in the HealthShare Documentation, how to create a TrakCare login account?

This is on:     Cache for Windows (x86-64) 2017.1.

Hello gentlemen,

I'm wondering how to get the specific HL7 message structur by coding in ObjectScript. I'm explaining myself, when you receive a hl7 message, you have to set its DocType to be able to read it conveniently. For example, an ADT_A15 (2.3.1) must have the docType of an ADT_A09 (2.3.1) to be well read. So you have 2 possibilities to know that, either you go in the documentation to see which structur to set in but I don't think it's generic.

What is the best way to learn mirroring? Are there any videos on learnings at InterSystems community?

Hi Everyone!

New session recording from Global Summit 2018 is available on InterSystems Developers YouTube Channel:

Creating an Event Management Service

Our PAS system supplies date in a particular date format (ISO 8601 compliant) that includes seconds and milliseconds.  Because many downstream systems cannot handle milliseconds (and some don't even want seconds) many transformations are required to truncate the data.

What immediately sprang to my mind was to look for a setting on the operation to modify outbound datetime fields - obviously there isn't one, thus the need for this question.

I need to post data to an api which expects certain data in body, query, path and header. I am using Post method of %Net.HttpRequest class. I was able to set body and header values, but couldn't figure out how to set the query and path variables. Appreciate any assistance! Is it the SetParam method()?

http://servername/api/get/?param1=true

Does Intersystems Ensemble support (for LGBTQ+) gender code "U" in Healtshare? Specifically for the clinical (or physician) viewer?

Test shows the gender code is consumed without error and stored, but the viewer does not present it except (as far as I can see) in the patient search drop-down.

The 2.3.1 HL7 ADT schema code table lists "U" as a supported option.

Would this require customization in the viewer code to support this?

I'm looking for options to create multiple DFT HL7 messages based on data contained in a ZCO segment in a single inbound DFT message.  I have the following ZCO segment:

ZCO|CCC^Charge Code|1306794,1071301,23510,1071424|MFCD^Charge Code|14232,3542|||||

In this example, I need to create a new DFT message based on the data contained in ZCO:2.  Each code needs to be in it's own DFT message and put in FT1:7.1.  The number of codes will vary for each inbound message, but each code will need to create its own outbound message to the client.
 

Good morning,

I have another question regarding batch files and Ensemble/Healthshare. Is it possible for a batch file to check the status of the mirror monitor and return it as a status or value?

At present, we store the name of the instance in an echo and reference that. In the event we have to use a different echo, is it possible to have that in a different variable at all?

I hope this makes sense. If I can provide any other information please do let me know.

Kind regards, Alexi Demetriou