Hello,

First of all thanks for your time, and thanks for your help.

We have the following doubt: how HTTP status is being replied from a SOAP Service to the Outbund System?

Where in HealtShare 2020's classes is being replied an HTTP/200 OK or an HTTP/500 or any SOAP HTTP status code?

We ask this because some outbound systems do need to have an HTTP 200 to being able to process our SOAP responses.

We have been examining the following classes:

EnsLib.SOAP.Service

0 2
0 59

I'm trying to change the Stream property inside a DTL with a Source Class of Ens.StreamContainer. The code, below, will change it within the DTL testing tool, but running an actual message through the Production's Process doesn't change the Stream property. I can change other properties of Ens.StreamContainer by using the normal Set action and it is reflected when running it through the Process. For context, this uses a FTP service to grab a file. Any thoughts on why I can't just write modified stream data to the Stream property?

0 7
0 56

I have a fixed width complex recordmap that is an older version of a file format. I am trying to retool it to fit the latest version. The old recordmap has almost 500 entries on it and the new version has a few more fields added along with changes to some field lengths. Adding a new field adds it at the end of the recordmap and moving it from field 490 to field 139 is a painful process. Is there an easier way of doing this?

1 1
0 52

In HealthShare, we can add any new application that will show up in the left menu of the viewer. I am trying to add new navigation entries that will look like 'patient search' popup.

- Is Intersystems sharing its HealthShare style? They are using material tags, but it looks very different that the default material themes. I probably can pick up the style, but perhaps there is an official way.
- Is there a way to do a popup like patient search? So far I see, a new option is associated to an url not some javascript code?

Thank you for your help.

1 0
0 31

Dear,

I'm trying to configure a new interface that reads HL7, transform them into FHIR messages and then send POST or PUT or DELETE depending on HL7 doc type.

1-I added an HL7 TCP service that reads ADTs messages

2a-Send ADTs to a process to transform them into SDA (using the following command: do ##class(HS.Gateway.HL7.HL7ToSDA3).GetSDA(request,.con))

2b-Extract the patient MRN and add it to the AdditionalInfo property (using the following request message class: HS.Message.XMLMessage)

1 5
1 63
Question
· Feb 28
Installation hangs

I had some issues with my install so I tried removing the software using Windows Add/Remove programs but it just froze. It messed up my install and now I can't access the SMP.

I tried reinstalling using the same commands I did on first install but it froze again. There were no logs in the installdir that was created. Windows log just shows install started.

0 5
0 101

Hi,

I am having an issue when I am publishing data to FHIR which is hosting in AWS. I am sending the data to the Cloud FHIR url but getting the below error.

Any idea how to resolve this issue? Any example to cretae FHIR repository using Object script?

:<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>404 Not Found</title> </head><body> <h1>Not Found</h1> <p>The requested URL was not found on this server.</p> </body></html>

0 2
0 47

Hello everyone!
So, I am supposed to receive a REST-request into my production, and I need to send it, exactly as I received it, to another server.
I am struggling to find any good info on this, and have a hard time coming up with a good approach.
What would be the easiest way to do this?
- I have so far thought about possibly doing it with an EnsLib.REST.GenericService and then sending it with an EnsLib.REST.GenericOperation.

1 4
0 104

How to send the HL7 Batch messages over a SOAP webservice which takes 3 credentials(Username, Password& Org.ID) using IRIS Management Portal V 2019.1?

WSDL xsd : element - 1.Username , 2.Password ,3.Org.ID ,4.HL7 Message.

Info I had -

Source is CSV File will be translated to HL7 using data Transformations. All the transformed messages need to be sent to destination System through SOAP request as a single Batch File.

0 0
0 63

Hi everyone,

I'm looking for a strategy for dividing a large FHIR message, in a post request, into smaller parts.

I have found the paging modifier for the GET request, but not a similiar one for the POST request. Maybe the 'batch' type of a Bundle could help me to indicate this aim but there aren't any attribute to say the total or the i-th element.

Do you know of any method for implementing 'paging' in a post request?

0 2
0 85

Hello All

I'm not sure what the best practice is for this. I have a DTL for returning ORUs back to a hospital in a different time zone. They have requested that various timestamps have the time zone offset added to the HL7 format (%q%k, I think). First, I just wanted to be sure the system was aware it was DST. I was able to determine if DST is in effect like this:

0 5
0 686

Hi gentlemen,

It may be very easy but I'm currently battling with a stupid business operation.

Here is what I must do and what is already in place:

A business service scan every 5 sec the apparition of files and send it to a business process.

The business process (a routeur) don't let pass everything and a few of them go to a specific operation.

The operation must :

1 ) create the file with the same name of the original one (in the service) then save it.

1 2
0 1K

The 2023.1 Clinical Viewer appears to have data dependencies that need to be met in order for data to surface from the SDA to the chart. Examples:

1. Lab results need to have a collection date or they will not display.

2. Observations need to have their UoM and codes in the portal txt files in order to display.

Are all of these requirements documented?

0 2
0 193

Hello,

I am trying to connect to a web socket endpoint that potentially has a number of different IP addresses for load balancing purposes.

I have been asked whether it's possible to use a DNS name to resolve the IP address rather than statically assigning one specific IP address in the TCP Operation.

If it's not possible to resolve on a DNS name directly on the TCP operation, then I wondered whether it was possible to provide multiple IP addresses.

0 2
0 108

Customer has a connection set up to connect to an ISC sftp server but it keeps failing the connection with:

ERROR <Ens>ErrOutConnectFailed: SFTP Connect failed for sftp.il.intersystems.com:22/NPPES/SSL='!SFTP'/PubKey=''/PrivKey=''
with error ERROR #7500: SSH Connect Error '-2146430933': SSH Error [8010102B]: Failed getting banner [FFFFFFFF8010102B] at Session.cpp:238,0

A manual connection can be made successfully and I have verified that the credentials are correct. The Connection Settings are:

SSL Configuration - !SFTP

0 1
1 58

Hi Community,

I am attempting to create a new table by executing a SELECT statement that involves joining multiple tables. However, I encountered an error during execution: '( expected, AS found^Combined AS.' I would also like to create a cube based on this SQL table. However, during the cube creation process, I am prompted to specify a source class, and I'm unsure which class to use as it requires an existing class. Could you please help me identify the issue with the table creation, and provide guidance on selecting the appropriate source class for the cube creation?"

0 1
0 81

Hi Community,

I hope this message finds you well. I am reaching out because I have encountered an issue with a new dimension I created, named "Region," and I could use your assistance in resolving it.

The problem is that when I open the cube analyzer, the "Region" dimension does not populate data as expected. Instead, it merely displays the text "sourceRegion," which I specified as an expression in the architect.

0 1
0 60