HealthShare

Syndicate content 59 

Hi 

Has anyone used Health Connect/Ensemble to receive results directly from POCT devices (Glucose monitors etc)?

I've been looking for information on the POCT01-A  protocol, and as far as I can tell it is a HL7v3 XML schema, I should be able to get results from these devices, though I expect I need a webserver endpoint. (though I can't find any reference in the Health Connect documentation)

Does anyone have any knowledge of this?

KR

 

Stephen

EDIT:  from the silence I'm wondering if this in normally handed off to specialist middleware?

00
0 2 43

Hi all,

I need some advice about JSON conversions and the outputs. I am being sent a JSON response from an API call and I am struggling to produce an output that I can use from it.

I have used the %FromJSON() method call to take the JSON stream source (pData) and convert it to a Dynamic object (object) but I am a little unsure as to how I can read the dynamic object and use it to extract the values from this and set the values as a property in another class.

The current coding I have for the conversion:

00
0 21 205

Hi,

I've successfully installed and configured the custom MESH API supplied by intersystems. I'm able to send HTML rendered documents directly to GP's using Kettering.xml. 

Ideally, I'd like to be able to send PDF/RTF files rather than HTML. Is this possible and if so can I still use Kettering xml? I know FHIR is the preferred method of transmission but i've tried sending a test FHIR message through MESH to EMIS but it's not displaying so I'm not sure if EMIS is able to display FHIR formatted messages. 

Thanks.

Anthony Breen

00
0 4 60

I was wondering if there was a certain procedure or documentation on securing (Https://) the Web Portal into IRIS/Ensemble?

Currently we are using LDAP Delegated Authentication to access the Web Portal using LDAP. However as more and more emphasis is put on securing applications within networks, I can see Management/Security asking us to make sure that the web portal is more secure.

10
0 2 81
Question
Kyle M · Sep 17, 2020
modifying patient address in DTL

Hi

Newbie question. Could you please help me implement the following using DTL only - no programming. 

We have a problem where our system sends longer addresses e.g. block of flats in an unexpected format

e.g. address below:

 

00
0 3 81

Hello everyone smiley

We are facing what seems to be a network problem while transferring HL7 messages from Ensemble/Healthshare to a distant target through TCP/IP.

Here is the version of the system in any case it could be useful: Cache for Windows (x86-64) 2017.2.1 (Build 801U) Wed Dec 6 2017 09:07:51 EST [HealthShare Modules:Core:14.02.2415 + Linkage Engine:15.03.9901]

00
0 7 109

Hi i have rules and i want to log them to analyse what rules executed , I want to add in the log Msg Controller Id, MRN, Value coming in the message, and my customize text telling whats wrong with this field... i have like 50 rules and at the end i can check the log table and found like 20 entries so it means 20 data issues are there for a given message control id. any advice how to to do it

 

 

00
0 3 84

Hi all,

a HealthConnect customer of ours came across with a question to use an external service via REST and OpenID within one of his HealthConnect  (2020.1) productions. The overal idea is to send data to the external system after receiving a baerer token to use for the communication between HealthConnect and this system.

00
0 4 80

Hi,

I've added a REST service which worked fine on our test system but failed on the production environment because UnknownUser does not have %All set and I really don't want it set on production (in fact I've also switched it off on test).

Is there a way to allow a single REST service to have unauthorised access?

I was thinking adding a resource/role to UnknownUser specifically for that service but I've never touched on Users/Roles/Resources so I'm struggling to work out what needs adding where.

Thanks

00
0 2 78

I am having difficulties with using the ..Strip() function in my DTL to strip the slash ( / ) from the phone number portion of an x12 834.  There are very few records that have the slash in the phone number, so I am trying to filter out any characters other than numbers so that all phone numbers are formatted 1112223333.

Here is the code portion of the strip:

       Set           HomePhone             ..Strip(source.{loop2000(k1).loop2100A.PER:CommunicationNumber},"*AW","-()/").

I am then checking the length of HomePhone.

00
0 4 65

Hi,

Can anyone  point me to an example of a DTL & Class method that can pull a base64 encoded PDF out of a MDMT02 message?

This is really asking for two things;

- how to make a DTL that extracts a specific subfield of an HL7 2.3 message into a message of its own,

and

- how to transform an base64 encoded document into its original binary form for writing to a file.

I'd also love to see an example of an HL7 2.n MDM^T02 ==> HL73.ITK2 non-coded CDA

00
0 3 1,882
Question
Carl Tawn · Jul 16, 2020
Ensemble namespace permission

Hi,

I am attempting to set up a security role for our support team so they can have read access to the production and messages.

I have given the role RW rights on the resource associated with the database. However, when I log into Management Portal and select "Ensemble", the "Available Ensemble namespaces" list is empty.

What permissions do i need to set to be able to navigate to the production?

Thanks in advance,

Carl

 

Edit:

00
0 8 125

I send ORUs to a process where a transform is applied before sending the message to a process where the routing is handled. A recent request was made that when OBR:25="D" the message is also be faxed with transforms that have some similarities to the original, but not exactly the same. I copied the DTC, made the alterations, and created a separate rule to handle it. However, when I run a message through with a "D" in OBR:25, it is only sent to the routing process once.

00
0 3 49

Been cleaning up our production 2017.1 instance of Health Connect in preparation to a move to Health Connect 2020.1 (on IRIS!)

One thing I have found I we have built up a number of old classes and other configuration files.

It would be nice to start on the new server with a clean slate.

Is there any way to identify classes that haven't been used for a long time so they can be reviewed and removed?

Kind regards, 

Stephen

00
1 4 175

The request terminology sync task is currently producing this error: 

ERROR #6248: SOAP response is a SOAP fault: faultcode=wsse:FailedAuthentication
faultstring=The security token could not be authenticated or authorized
faultactor=
detail=

The task is running correctly on other edges. I checked the HS_Services password and its the same as on the other edges. Anyone has any thoughts as to what could be causing this and how I can fix it. 

00
0 1 65
Question
Jonathan Anglin · Jul 7, 2020
DTL vs. ObjectScript

As I've become a little more familiar with HealthShare, I'd like to start exploring different ways of doing things. To date, the bulk of my data transformations have been using DTL; only using ObjectScript for a few operations that write to external SQL tables that were largely based on examples provided by my sales engineer.

00
0 4 102

Hi all

Does anyone have an easy way of reading the cdata in the xml response returned buy a Webservice?

At the moment I have a XML class and then I use read.Correlate() to read through that XML bit.  

However, depending on the message I have different things in the CData and I don't want to create a class for each one of these.

The API returns the cddata as KeyValueOfstringstring.

00
0 4 88
Question
Omar Ateen · Jun 21, 2020
ObjectScript via vscode

Good day all

I am a new developer in cache, I am trying to connect vscode to healthshare but i get the following error:

////Error: Error: Parse Error: Expected HTTP/////

Please help me on this.

 

My setting like this:

{

    "objectscript.conn": {

      "active": true,

      "label": "LOCAL",

      "host": "****",

      "port": 57772,

      "username": "***",

      "password": "***",

      "ns": "***",

      "https": false,

    },

00
0 4 134