#HealthShare

does Health Connect have an out of box setting to send some type of "Keep Alive" packet?  This is for a TCP connection.  I have a vendor that will disconnect from the engine if there is a 2 hour idle time.  would like to send something across every hour (if its idle) to prevent the disconnection.   I'm assuming this may be something custom that needs to be created, but thought I asked the community first.

Hi All, 

I'm currently trying to modify the provider portal using Trak to add a new column. Using the column editor to get the column to display on the page is relatively simple, but where I'm running into problems is modifying what will display in the column. 

Essentially, it just needs to run a simple "if value in column A is in this list, display x, else display y" which is easy enough to write in ObjectScript, but the ISC documentation is relatively sparse about how to get a specific column to run that bit of code to display what I need it to. 

Appreciate any insights you all can pro

Hi There

I've created a new WebClient using Studio Addon-s Soap Wizard. 

I've tried to send a soap request using  InvokeMethod.

However the Body comes empty   <soapenv:Body></soapenv:Body>

I needed it to be 

   <soapenv:Body>
      <ns:Ping/>
   </soapenv:Body>
 

InterSystems has corrected several critical defects that can result in data integrity issues. These defects were identified and corrected within a short time, so InterSystems has simplified the upgrade process by consolidating them into a single package. The effects of encountering these defects may not always be visible. These defects affect InterSystems IRIS, IRIS for Health, Health Connect, Caché, Ensemble, and HealthShare products. All of these defects relate to the application of journal data.

InterSystems recommends that you review this document. It will help you determine your level

The 2019.1.1 version of HealthShare Health Connect 2019.1.1 is now Generally Available!

This release includes maintenance updates in a number of areas, as described in the online documentation here.

It also includes two new features, described in the online documentation here:

• Support for InterSystems API Manager
• X12 Element Validation in Interoperability Productions
• In-Place Conversion from Ensemble - based Health Connect (version 15.03) to Intersystems IRIS - based Health Connect

The build number for these releases is 2019.1.1.612.0.  A full set of kits is available from

Hi there

I've noticed extreme slowness using the portal in my Healthconnect dev enviroment lately.

Any page in the Portal takes a lot of time Loading.

Any ideas of what it could be?

Kind Regards,

Joao

I have a cube that lists services, processes, and operations information and wanted to make the names of the items more user-friendly to end users and to use a flag to determine which components would be displayed in the dashboard.

We created another table/cube that has a status flag (1/0) to determine whether we would look at the item, the existing name, and the human-readable name.

What is the best way to reference the data in the new cube from the original cube to use the human-readable name?

Thank you, LG

Looking at the DTL, we can pretty much understand what the provided mapping from FHIR to SDA3.

But, is there any Intersystems document, where the mapping To/From FHIR is documented, at least FHIR to SDA3 ?

Hi, 

What is a Foundation Production and what does it do?

We are currently on HealthShare Health Connect  15.03 and we are starting the process of moving to HealthShare Health Connect 2019.1.

The 2019.1 Installation Guide is pretty clear that it is essential, but I'm having trouble working out exactly what it does?

Leading on from this is what should I call it?

From the installation guide: 

5. For Local Name, enter the name that will identify the Foundation production. This name will become the namespace that contains the class definitions for the production

So the name I give it will

Hi everyone, 

I have just started to use JavaGateway and I didn''t encountered so much difficulties since I've got the output of the Java class I have called. 

This is the class I have implemented: 

Method OnRequest(pRequest As EnsLib.HL7.Message, Output pResponse As EnsLib.HL7.Message) As %Status{set MDMarchiv=pRequest.OutputToString()$$$TRACE(MDMarchiv)#dim RPConverter = ##class(training.hl7.HL7toRP).%New()set output=RPConverter.hl7toRp(MDMarchiv)$$$LOGINFO("after transformation: "_output)set RPStream = ##class(%FileCharacterStream).%New(output)#dim finalResponse As %F

Hi Community,

I am trying to remove a duplicate OBX from a result, but I am running into some issues. Let me explain.

First I had a OBX where the observation Value had the blood type in it and the following OBX had the result in it.

The clients wants the blood type and the result in one field. therefore I merged / concatenated the observation values of the two OBX's.

I tried removing the OBX:2 but just cant take the whole segment out. 

please see examples below

This is the result.

This is the concatenation of the two OBX's

Trying to remove the Negative OBX / Result in the Observation value

Any he

I have a scenario where I'm using a EnsLib.File.InboundAdapter to collect files from an external file system.  The files require to meet a certain criteria before they are moved to another remote file system.  If they don't, I would like them to stay where they are so that they can be collected again when the criteria has changed.    I have set the adaptor property DeleteFromServer to false - which is fine - the file stays put in its original location, but the file is never collected again as I receive a  "Skipping previously processed file  " info message.   I'm presuming the file name is sto

hi 

A newbie question. I am trying to use Data Transformation Editor to transform NTE segments into additional OBX segments.  At the moment I am getting both segments OBX and NTE trying to populate a single OBX. Can this be easily fixed?

Hi all,

is it possible to omit the typical XML header line

<?xml version="1.0" encoding="ISO-8859-1" ?>

when writing an the contents of a EnsLib.EDI.XML.Document  using the above mentioned operation. I´ve already digged into the config value Format. It only states that:

C(e) : output an XML header line declaring character encoding e. If e is empty use the encoding defined by the Adapter. If e begins with ! force the output stream's encoding. Note that this will be applied automatically for File Operations configured with a non-UTF-8 Charset

The target system requires to receive the file contents wi

InterSystems has corrected a defect that could lead to invalid backups on Windows platforms. The defect causes upgrades to disable the EnableVSSBackup setting. By default, EnableVSSBackup is enabled (value set to 1) and the upgrade sets its value to 0. Windows VSS backups taken with this setting disabled may contain invalid CACHE.DAT files.

This problem is limited to Windows platforms on the following versions:

• Caché and Ensemble 2018.1.0, 2018.1.1, and 2018.1.2
• HealthShare Health Connect (HSAP) 15.032 on Core versions 2018.1.0, 2018.1.1, and 2018.1.2
• HealthShare 2019.1 (Unified Care Record, Patient Index, Health Insight, Personal Community, and Provider Directory) on Core version 2018.1.2
• HealthShare 2018.1 (Information Exchange, Patient Index, Health Insight, and Personal Community) on Core versions 2018.1.1 or 2018.1.0

The defect only occurs if you are upgrading to a version listed above. Once you have upgraded to an affected version, you must manually enable the setting; otherwise, it will be disabled on future upgrades, even when upgrading to versions containing the correction.

For customers using Windows VSS backups, InterSystems recommends enabling this setting on any 2018.1 instances of Caché or Ensemble. Once you have enabled the setting, future upgrades (including to affected versions) will preserve its value.

Is it possible to create a task that will initiate a Business Service that is dependent on the completion of a separate EDI data process?

I have a complex data flow with multiple EDI processes where one process must run and produce one or more files that get deposited in the source folder for the next EDI process.  The entire process is currently set up where 2 of the EDI processes execute at a specific time.  The problem with that is when a network or server interruption occurs at the time they are supposed to start, it causes a complete failure of the entire process.

I can't just set them to r

1. Purpose

This is a 10-minute simple step-by-step guide on how to quickly set up various flavors of HealthShare docker containers from scratch on a Win10 laptop. 

For example, we can build a couple of  HealthShare "global edition vs UK Edition" demos as shown below.  

There are a couple of frequently asked questions from HealthShare colleagues and partners:

• "I am no Docker guy, but is there a quick way to build various flavors of HealthShare containers simply for demo/PoC/dev/training or troubleshooting purpose?"
• "I just can't make "Docker for Windows" work on my Win10 laptop - how did

Hi -

I'm wondering if there is any sort of experience with trying to leverage things like fingerprint readers into any identity management interface. I'm wondering if the "output" of some fingerprint scanner (or face scanner, or eyeball scanner for that matter) is something that HealthShare Patient Index might be able to use?

Hi all, 

I am trying to create a method to count the number of entries in a global, including all subscripts. I am having a bit of trouble getting the code to make it to the second subscript. When I get to the position where my key is "Canada" and I add a comma and empty quotes to it, it returns USA as the new key when I do the order function. Is the $Order or the global not able to use a single string to represent multiple subscripts?

Here is my global structure:

^Locations("Canada",1)="Montreal"
^Locations("Canada",2)="Vancouver"
^Locations("USA",1)="Michigan"
^Locations("USA",2)="Ohio"
^Location

We've just published an update to the Serenji extension for VS Code. Starting with this version (3.0.7) you can now debug the code that implements your REST services. Here's a taster:

Read more about Serenji on Open Exchange.

Hi

I  was wondering whether anyone can help I would like to know what is the underlying method that is used for exporting lookup tables from within studio.  I would like to do this programmatically.  The export function provided with Ens.Util.LookupTable is not compatible with studio.

Thank you.

Kind Regards,

Salma

Hi All,

I am currently looking for a way of exporting a project from within studio that would actually create the subfolders associated with it.  Is there an easy way of doing this.  Thanks in advance?

Kind Regards,

Salma

We have created a custom SDA container to store a certain kind of new, customized patient data.

We are observing a behavior in the correspoding analytics table for this custom SDA class where rows are added for a patient for which the MPI is null and the patient record does not exist.

From what we can tell, it seems that, when there is a MPI link/unlink, rows are added to analytics linked to the new Patient record that contains the latest MPI, but the old rows linked to the old (now non-existent) Patient are not removed. We are concerned why this is happening, since, in our testing, it does not

I have created a custom container that contains medication adherence data. I want to know the best-practice way of querying the data for to display in a custom Zen page in the Clinical Viewer for a given loaded patient.

Let's say the custom class is called Hospital.Data.MedicationAdherenceData. Let's say the streamlet class is Hospital.SDA3.Streamlet.MedicationAdherenceData

I can look up the data by using the Sequence number as viewed in the HS.Viewer.Services component trace after loading up a patient in the Clinical Viewer. I do this by selecting from the custom streamlet class using "T+[seq

Hi Everyone!

Please watch the new video on InterSystems Developers YouTube, recorded by @Sourabh Sethi  in the  "Coding Talks" format:

Informative and Fast WEB API VIA ObjectScript and Ensemble/HealthShare

 Pre-requisite - Basic knowledge of ENSEMBLE and ObjectScript

My both previous sessions were related to OBJECTSCRIPT.
This time, we are going to add a flavour Ensemble/Healthshare,
to be informative and fast.

In this session we are going to discuss about - 
"Informative and Fast WEB API VIA ObjectScript and Ensemble/HealthShare"

Web API can be REST or SOAP. We will taking example of SOAP in this session.
However, whatever I demonstrate today, will also be applicable for REST.

In today's Session, we will creating 2 versions of same API and will Compare there performance using tool called SOAP U

I've setup ODBC connection so I can access Cache data within SQL Server.

I want to be able to write SQL queries for internal monitoring purposes, similar to what's possible with SQL Server.  Specifically I want to be able to check mirroring status (i.e. check which is the current primary mirror member), check the status of any Ensemble productions (started/stopped), check the status of business hosts etc.  I want to do all of this from SQL Server to go with our other system monitoring solutions.

Does anybody know if this is possible, and if so the names of tables/namespaces which might store the

I was just watching a video - Clinical Document Architecture and Document Creation - Videos An Introduction to CDA - from Australia (browser, Firefox). The video started and played fine for 8m 49s, then stopped with the following message: Could not download the video Error code: PLAYER_ERR_TIMEOUT.

I'm not saying that this is in anyway "best practices," but I'm in a peculiar situation where I need to restrict users from starting a "retired" Ensemble Production in a namespace that's been renamed. It's still an "Ensemble-activated" namespace; we need to keep it available for Ensemble Message Viewer access ... fortunately, only for a little while.

It's a bit of a hack ...

Open the Production class in Studio and add the following classmethod:

ClassMethod OnStart() As %Status
{
    Return $system.Status.Error(5001,"THIS PRODUCTION IS DISABLED.")
}

A Production won't start if its OnStar

Hey everyone!

I had looked around a bit and couldn't find a native way to log queue counts in Ensemble/HealthShare so I wrote a quick task and persistent class to do it. Hope this saves someone a bit of time. Let me know your thoughts! Thanks! 

Bobby Hanna