Syndicate content 0  
 
All time

Good day, every process in my software is about to update 3 specific globals in row when the process is called to do some job. I need to guarantee that during updating of those globals with multiple processes there is only one process that is actually working with those globals. Moreover I need my globals unreadable if other process is in critical area.

Example:

1 8
0 910

Hi,

A device is sending me HL7 messages (ORM^O01)

the framing is set to "None"

and i get the following error:

3 Segments
Build Map Status = 'ERROR <EnsEDI>ErrMapRequired: Missing required PID element at segment 2 (PID)'
'ERROR <EnsEDI>ErrMapRequired: Missing required OBR element at segment 2 (PID)'
'ERROR <EnsEDI>ErrMapSegUnrecog: Unrecognized Segment 2:'PID' found after segment 1 (MSH)'

i seems that there framing chars in at the beginning and end of each segment

(in Hex)

0 3
0 914

InterSystems IRIS for Health ENSDEMO

Yet another basic setup of ENSDEMO content into InterSystems IRIS for Health.

Make sure you have Docker up and running before starting.

Setup

Clone the repository to your desired directory

git clone https://github.com/OneLastTry/irishealth-ensdemo.git

Once the repository is cloned, execute:

Always make sure you are inside the main directory to execute docker-compose commands.

Open Exchange app
5 14
0 636

Hi - Recently I have been investigating an annoying situation whilst editing ObjectScript classes or routines in VSCode.

What was happening to me was, as I was typing in lines of code into my class (for example, adding a new Method, or changing the Class signature, or a block of code), this would quickly get syntax checked, re-formatted, and compiled - inevitably, (since I would be mid-way through my typing), this would generate compilation errors.

16 12
1 675

Introduction

Say you have a receiving system that accepts HL7 and provides error messages in field ERR:3.9 in the ACK it returns. You require a different reply code action depending on the error message, however the Reply Code Actions settings for the operation do not provide this level of granularity. One option could be to create a process that takes the ACK and then completes the action you were expecting, however things can get a bit messy if the action is to retry the message, especially when trying to view a message trace.

9 2
1 875

Hi Developers!

We are introducing a new feature on Dev Community site – Key Questions by InterSystems Developers.

We've added a new special #Key Question tag to highlight questions related to InterSystems Data Platforms considered as having the biggest impact.

Each month InterSystems Experts will choose such questions, and those authors will be awarded with all the honours!

What honours? Details in this post!

5 6
0 795
Article
· Jun 13, 2016 1m read
Debug: using locks for breakpoints

Hi, Community!

Want to share with you one debugging approach from the Russian forum.

Suppose I want to debug the application and I want it to stop the execution on a particular line.

I add in code this line:

l +d,-d

When I want to start debugging in this line I block d in terminal

USER> l +d

And execute the app.

The app stops on this line and lets me connect to it with Studio debugger.

0 8
1 755
Article
· Feb 8, 2021 2m read
Websocket Client Embedded Python

This is a demo to make use of a simple WebSocket Client with Embedded Python in IRIS.

How to Test it

  • Run an Iris Session in Docker
  • Select your WebSocket Echo Server
  • Enter the text you want to send or generate it
  • Send it and see the result
$ docker-compose exec iris iris session iris "##class(rccpy.WSockPy).Run()"

*** Welcome to WebSocket Embedded Python Demo ***

Open Exchange app
9 0
0 915
Question
· Jan 3, 2019
n00b questions

Hello,

I have some beginner questions as I am working through the InterSystems Cache learning path:

- Where I work, we us Cache, but we often learning about and train on MUMPS. No one really talks about or mentions MUMPS here, but my understanding is that ObjectScript is basically MUMPS plus whatever new things InterSystems put on top of it. Is that a fair assessment?

0 16
0 899

Hi Community!

It's time to celebrate our 25 fellow members who took part in the latest InterSystems Technical Article Contest and wrote

🌟 38 AMAZING ARTICLES 🌟

The competition was filled with outstanding articles, each showcasing innovation and expertise. With so many high-quality submissions, selecting the best was no easy task for the judges.

Let's meet the winners and look at their articles:

11 21
0 494

Good morning!

I am developing a Java project (Spring Boot + Maven + Hibernate) but I've a big issue when I try to define the Hibernate Dialect org.hibernate.dialect.InterSystemsIRISDialect... that dialect is neither in the Hibernate library nor in the IRISDriver class com.intersystems.jdbc

How should I define the IRISDialect in my project?

Thank you in advance!

0 5
0 909

I am fairly new to Cache and ObjectScript. I have a new task I have created with a corresponding method that I am trying to debug in Studio (2013).

My ClassMethod looks like this

ClassMethod DoMyWork(Output pWorkCount as %Integer,  pInput1 As %Integer = 30)

{

/* Does some work here and increments pWorkCount */

}

When I try to debug this using studio, I browse to my method but I am not certain what to put in here for the input parameter 'pWorkCount'.

0 3
0 911

This tells me that there is no timezone offset on this table/field:

Select TOP 1 GETDATE() as Now, TimeCreated FROM ens.messageheader ORDER BY TimeCreated DESC;
Now TimeCreated
------------------- -------------------
2016-10-18 16:16:49 2016-10-18 16:16:31
0 13
0 900

Hi All,

It must be the groundhog days but I can't solve something that I know I've done before. I have a legacy CSP page on a version of Cache without JSON and just pure Cache.

I need a CSP page that takes a .xlsx file, manipulates the file (in COS) and then returns a new manipulated file.

My CSP Page gets the file fine, the problem is then returning the response with the new file as an attachment. I don't want to pipe to a new csp page with a different content-type so was sure I can set %response.Headers etc to get the reply stream I want.

0 6
0 906
Article
· Aug 8, 2017 1m read
Outperforming PostgreSQL and MySQL

In a previous exercise, I was able to show the power of Caché.
A medium-designed set of interdependent tables with some GB of data.
URLs cross reference over some million pages resulting in ~3 billion records

Competition was between

  • Caché
  • PostgreSQL
  • MySQL

Criteria were Speed + Storage consumption
I composed a customized loader fed over a "raw" TCP connection
Mapping the "objects" into the final table by directly writing to Global Storage.,

17 3
0 852

We all know that having a set of proper test data before deploying an application to production is crucial for ensuring its reliability and performance. It allows to simulate real-world scenarios and identify potential issues or bugs before they impact end-users. Moreover, testing with representative data sets allows to optimize performance, identify bottlenecks, and fine-tune algorithms or processes as needed. Ultimately, having a comprehensive set of test data helps to deliver a higher quality product, reducing the likelihood of post-production issues and enhancing the overall user experience.

In this article, let's look at how one can use generative AI, namely Gemini by Google, to generate (hopefully) meaningful data for the properties of multiple objects. To do this, I will use the RESTful service to generate data in a JSON format and then use the received data to create objects.

29 4
0 831

In looking at the Production monitor within Ensemble, I was wondering if there is a way we could customize it for our use. I notice it is basically a dashboard.

For example I would only like to truly display those Services, Processes, and Operations that are truly in dire need of attention. The Monitor out of the box just seems too busy, and I would like to simplify it.

0 2
3 909

Hello everyone,

Im just wondering if there is any possibility to "Listen" to a cache DB? We have our cache DB somewhere else provided by a different company, we are provided the interface to connect to that cache DB so we can extract the cache DB every night.

Im just curious if theres a way to "listen" to the cache DB, so if theres any changes on the table in the cache DB, I could make a trigger to extract the table again.

I know i could just set my ETL every hour or so... but that would extract all the tables in cache DB.

0 9
0 902