So we are still fairly new to the ensemble app and getting set up. I have 3 seperate  batch record file services that pull in files and send to 3 seperate processes. there is no real rules other than an when condition=1 use this said DTL and send to operation. all 3 of these routers use different DTL's as they are seperate files but all go to the same operation. for some reason i am seeing the files sit in the Process and say  Delivered. 2 of the three process after up to 10-15 mins of sitting and the third gets an error i am very unfamiliar with, so this post is two-fold. 

1.

Hi-

Please excuse my rather limited knowledge of HL7.

In Ensemble, I have a HL7 message that contains several Z segments.  I have created a custom schema to represent the new Z segments along with the new DocType Structure and Message Structure

How does Ensemble/Health Connect know which custom schema to use?  I believe it has to be indicated in the MSH segment somewhere, but not sure where exactly that would be.   Is the version simply updated with the new schema name or is there some other field?

TIA

Ken

Is there an option to configure Caché to start external apache instead of internal one on startup?

Hi, Community! 

If you want to become an Atelier power user for back end development, this video is exactly for you:

Atelier for Server-Side Development

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : goto to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

Today's challenge on http://adventofcode.com/2016/day/7 is about checking for valid IPv7 addresses with TLS support. (No, it has nothing to do with real ip addresses which are at most ipV6 or real TLS, but just a way to keep you busy coding & hacking!)

The imaginary ipV7 addresses support TLS if they contain an ABBA sequence outside square brackets and no ABBA sequence inside brackets.

Hi Community. I have a vendor sending us X12 837 claims, they are sending a mixture of 4010 and 5010 formatted claims. Is there a way I can examine the file contents and determine the message format and route to two separate folders based on format (4010 vs 5010). I've tried setting up a record map, stream container and vdoc services and processes with no luck. Any help would be appreciated.

I am a newbie to Cache and we are using dBeaver product to query against Cache tables. I have the following query which does a GROUP BY to aggregate the columns:

SELECT PtNumber,cpt4_OVR,CollDateODBC, COUNT(*)
FROM site.MGBILL_View 
  WHERE cpt4_OVR IN ('36415', '36416')
     --AND ChargeFlags = '0'
       AND CollDateODBC > DATEADD(DAY,-45,CURRENT_DATE)
  GROUP BY PtNumber,cpt4_OVR, CollDateODBC
  HAVING count(*) > 2

-This returns a count of 3 for each patient (aggregated)

But I need to display the actual 6 rows. I would typically do this by replacing the GROUP BY with an OVER(PARTITION BY sta

Hi I've created a word macro in order to convert doc to txt via the command line, this works fine via the command line by myself or another user but when I try as an the intersystems user which runs under  LocalSystem it doesn't work. 

So can I change the user, or set the $ZF to run as a different user?

Or do I have to try another way to convert doc to txt - it's looking like libreOffice?

I just wanted to stick with word because I could be guaranteed on the result being accurate.

Thanks

Regards

Richard

If you want to dynamically serve images as a property of JSON then there is no perfect encoding solution. One method used frequently is to Base64 encode the image. Whilst there are some negatives to doing this, such as data inflation, there are some positives to working with Base64 images inside the browser.

Let's say you have an image placeholder on a web page...

And you fetch a JSON message from the Caché server containing the image as one of its properties...

Without needing to decode the image data you can create an img

I have an Ensemble installation with an FTP business operation which I would like to connect to a server over SSL in explicit mode (see also: https://www.rebex.net/kb/tls-ssl-explicit-implicit/default.aspx). I keep running into timeouts while attempting to do this via Ensemble. Does Ensemble actually support SSL in explicit mode??? Because I can't seem to find any setting where to switch it on.

Hi,

Is there a report of ports configured by services?

We have a lot of services, across multiple namespaces, and it would be useful to know what ports are configured, even for disabled services. 

Stephen

Hello, evrybody, I'm writing one project using CSP("OnPreHTTP"), and also REST angular. At the beginning I wrote purely on csp, then I decided to use angular for the flexibility of the client part. Now I can not design logging, I created a table App.Log with properties

/// Type of eventProperty EventType As %String(MAXLEN = 10, VALUELIST = ",NONE,FATAL,ERROR,WARN,INFO,STAT,DEBUG,RAW") [ InitialExpression = "INFO" ];/// Name of class, where event happenedProperty ClassName As %String(MAXLEN = 256);/// Name of method, where event happenedProperty MethodName As %String(MAXLEN = 128);

I work in a small development company that uses Caché as a database. In some support cases I have doubts about whether the client's infrastructure environment is not affecting Caché's response time. Reading a bit about comparing installations in different environments, both in production as testing and homologation environments , I understood that the TPC-E is a benchmarking method accepted in the market.
I'm reading the specifications of the TPC-E and I wonder if anyone has implemented or seen something similar in Caché.

Hello; We are managing several Ensemble instances on several servers.  One server has 4 instances, and two other servers have one instance each (those are production servers).  We encrypt all instances using the Caché encryption in the management portal.

Currently we are using two different encryption keys: 1 key on the server with 4 instances, which is used for all 4 instances, and a second key on single-instance server. ( I'm installing the newest production server now.)

What I'd like to know is what are the best practices for managing encryption keys for separate servers. 

The options are

I get two methods below: I would run both methods concurrently.

However, the "testRead" would always read the uncommitted results from "testInsert".

Anyway to avoid that? Thanks.

ClassMethod testInsert()
{
  &sql(START TRANSACTION ISOLATION LEVEL READ COMMITTED, READ WRITE)
  &sql(insert into Test.Table(AttrA,AttrB,AttrC,AttrD) values(1,2,3,4))
  hang 15
  &sql(ROLLBACK)
}

ClassMethod testRead()
{
  &sql(START TRANSACTION ISOLATION LEVEL READ COMMITTED)
  &sql(select count(*) into :ans from Test.Table)
  &sql(COMMIT)
  w !,ans
}

Is it possible to make the cache terminal available over a mirrored vip address for a healthshare mirrored environment? So that connecting to a terminal for a mirrored environment will always connect to the Live Node?

I'm looking to write a Powershell script to run against the system and need to connect to the Live Node in a mirrored setup. Is this possible or am I going to have to log onto each node to establish which is Live.  Or does this even matter?

I am trying to replace one of our SQL Integration Service jobs with Ensemble and I am running into an issue executing a query against a MS SQL database using JDBC drivers.

My SQL Outbound code looks like this.

Method SelectPaceartCharges(pRequest As osuwmc.Paceart.DataStructures.SelectPaceartBillingExtract, Output pResponse As EnsLib.SQL.Snapshot) As %Status [ ReturnResultsets ]{set query = "declare @currentYear int=datepart(year,getdate()) "set query =query_" declare @secondSundayOfMar datetime = CAST('3/8/' + CAST(@currentYear as varchar) as datetime)"set query =query_"

Learning Services Live Webinars are back! 

At this year’s Global Summit, InterSystems debuted InterSystems IRIS Data Platform™, a single, comprehensive product that provides capabilities spanning data management, interoperability, transaction processing, and analytics. InterSystems IRIS sets a new level of performance for the rapid development and deployment of data-rich and mission-critical applications. Now is your chance to learn more! 

Joe Lichtenberg, Director of Product and Industry Marketing for InterSystems, presents "Introducing InterSystems IRIS Data Platform", a high-level

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : goto to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t… or look at the http://adventofcode.com/ website.

In today's challenge, you have to find out how many 'valid' triangles you find on the walls of the Easter Bunny HQ.
(you can find the input on the adventofcode website : http://adventofcode.com/2016/day/3/input)

A sample of the input looks like this :

  810  679   10
  783  255  616
  545  626  626
   84  910  149
  607  425  901
  556

Hi,in my rule  i want to compare a value wich i extract from a file if it's inside in my interval values or no, example:

 date1<value>date2

is there any function in rule editor that allow me to do this.

thank's

Hi guys,

     I have accidentally clicked the remember password option in my Ensemble studio. So it is now not asking for username and password and even the authentication popup is not showing every time i open the studio.

    Is there anyway to remove the remember password option for the cache studio.

Thanks,

Hi guys,

   I am trying to run a command line code using $zf(-1) in cache terminal. it is returning access denied error.

I have tried to run the code in cmd itself it is also throwing Access denied error. But if opened cmd as administrator and run the same code it is working perfectly. I am using windows system. 

Hence i need to know how can i run the cmd line code as administrator using our terminal or studio. Please help me out.

Thanks,

Mani

Advent of Code is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : look  at article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

In this challenge, you need to find a password using instructions to move on a keypad.
Instructions can be U(p), D(own), L(eft) and R(ight).

You start at button 5 on a keypad like

1 2 3
4 5 6
7 8 9

each line of instructions lead to one digit of the password.
Full description can be found at http://adventofcode.com/2016/day/2

For example : ULL leads to '1' (a move outside the keypad can

Hi world :) , i've a question about editing an ensemble rule:

how can i edit fields in a BPL rule with programming (i need to modify target value for a condition  send label ).

until now i can edit only a condition value.

thank you for your collaborations

I have a text file that is fixed width delimited and am using a BPL to process this file, ultimately performing a transform from the text file to an HL7 message. I created a DTL, mapping from the recordmap to the HL7. In my BPL, I am performing some loops and other logic (that all is working). My issue is what to do when I perform the Transform.

I thought I could just call the transform and pass in the string as the source and a HL7 Message as the target. This results in an OREF error. I assume because the processing of the text file to the recordmap is not occurring.

Hi Team

i want to implement  an Oauth 2.0 framework in my application , i define my  connexion IHM, i want to check if the login and password are right when a user connect

do you've any idea ?

thank's

The Art of Mapping Globals to Classes (3 of 3)

If you are looking to breathe new life into an old MUMPS application follow these steps to map your globals to classes and expose all that beautiful data to Objects and SQL.

If the above does not sound familiar to you please start at the beginning with the following:

The Art of Mapping Globals 1

The Art of Mapping Globals 2

This example is going to show you how to map a classic parent-child structure.

Same disclaimer:  If you can’t make heads or tails of your globals after reviewing these articles please contact the WRC and we will try to help you

So just this morning we started to get this error from all of our SQL-client based tools that connect to our Caché SQL via ODBC: 

[%msg: <Error instantiating cached query class in Prepare(): <METHOD DOES NOT EXIST>Prepare+41^%SYS.SQLSRV *%New,%sqlcq>] (State:S1000, Native Code: 190)]

No queries work... any help? stumped over here.

doing a SQL query via Class %SQL.Statement

##class(%SQL.Statement

in Caché command line works... so that's why I think it's an ODBC issue..

I can't seem to find a SQLSRV class in the %SYS documatic

Greetings to all! Faced with such a problem, I ask for help, someone with great practical skills I think has already implemented this.The task was not to delete any objects from the database, but somehow mark this data deleted by client, because of this, I added Property Deleted As% Boolean [InitialExpression = 0];in the class.And in the redefined method %OnDelete:

ClassMethod %OnDelete(oid As %ObjectIdentity) As %Status [ Private, ServerOnly = 1 ]
{
        s person = ..%Open(oid)
        s person.Deleted = 1
        d person.%Save()
        Quit $$$ERROR(2112,

Hi guys,

I'm trying to immigrate some of my HealthInsight dashboards and pivot tables to another HS instance.

In some pivot tables, I defined them with a set of calculated dimensions defined in the analyzer, e.g as below:

Then when I exported the cubes and pivot tables in used to my new envirmonment. When I open my pivot tables again, the calculated dimensions are missing and hence my pivot tables no longer work:

Is there any way to export those calculated dimensions so that I can used them else where?