Hi,

 

We have a application developed in CSP and JS. Is there any way to make this application available in multiple language like Spanish etc.

 

We are ready to re-write the code in Zen also if it supports that feature.

 

Could any one of you please assist/advice a Solution to reach the required goal using Cache technologies, it will be a great help if someone has any sample code for the same.

 

 

Thanks 

Paras

00
0 7 270

Hello Community,

I recently encountered a issue with Caché and I can't figure out where the problem is coming from.

I noticed that the license limit (200)  was reached whenever I was opening my Studio (so it seems). When this occurs, I restart Caché (with the Cube in the Taskbar), and the number of license used is back to 1%, but grows back after.  The time taken before the number of license  grows back again looks pretty random.

Here is a couple of screenshots :

00
0 7 1,274
Question
Neerav Adam Verma · Dec 12, 2019
Bootstrap Tables & CSP

Hello All,

We need to develop a small csp application which shows data in simple paginated / searchable table for business users. 

It is to be built on an old version of Cache and is not a big full fledged application but something temporary.  We can't use Zen and using  a combination of csp & Bootstrap as bootstrap makes the pages look beautiful with little effort.

I have built the table in boostrap and it works fine with pagination and search working perfectly 

00
0 6 341

Hi All,

   It must be the groundhog days but I can't solve something that I know I've done before.  I have a legacy CSP page on a version of Cache without JSON and just pure Cache.

  I need a CSP page that takes a .xlsx file, manipulates the file (in COS) and then returns a new manipulated file.

  My CSP Page gets the file fine, the problem is then returning the response with the new file as an attachment.  I don't want to pipe to a new csp page with a different content-type so was sure I can set %response.Headers etc to get the reply stream I want.

 

00
0 6 231
Question
Tamara Lebedeva · Aug 22, 2016
$fromJSON and MAXSTRING

Hi, all.
I have CSP application and it needs to get and process data from ajax request with json-content. JSON can be very big.
In this case:
TRY
{
Set RequestObj = ##class(%Object).$fromJSON(%request.Content.Read())
} CATCH(Exception) {
Set Status=Exception.AsStatus()
}
I get just part of getting JSON and validate error in $fromJSON.
If I try to read it all in cycle:
TRY
{
While (%request.Content.AtEnd = 0) {

00
0 6 1,000
Question
Thembelani Mlalazi · Mar 12, 2019
String to date

I am trying to convert a string to date but can not get it to work I have  function that I would like to take in a date string and covert it to date object

here is the ezample so far can not get it to work any help appreciated 

 

set p="12/03/2019"
 
w $System.SQL.TODATE(p,"YYYY-MM-DD")
 
<ILLEGAL VALUE>todate+32^%qarfunc

if I try this still get the wrong value returned

set p="12/03/2019" 
w $ZDATE(p,3)
1841-01-12

 

00
0 6 1,474

Is there a possibility to map a CSP page residing in namespace ABC to a namespace XYZ so you could access it as if executing from XYZ: http://localhost:57772/csp/xyz/MyPage.csp ? Some odd cocktail of web application and package mappings that could make this happen?

The idea is to keep the CSP page in sort of a read-only namespace that only contains code, with the data residing in another namespace. This works for zen pages, but not for CSP.

00
0 6 400

Hi all-

We used to have this Java applet in our CSP page to "print all" and "download all" PDF medical reports.  We want this applet so that the user won't have to open each PDF in the browser just to print it.

But now most browsers do not support Java applets anymore due to security concerns, so that Java application is down.  We tried to migrate to Java Web Start but don't know how to invoke the JNLP file from the CSP page.  I am new to Cache so any help would be greatly appreciated.

00
0 6 623

Hi -

After having seen how Atelier is working, I've decided to start learning/using Atelier for an existing project.

I've installed, and after a bit of poking around, I've managed to get a project that includes my classes, and they compile and such (these were all from an existing export), but I see that NONE of my .csp files came along despite being in the export file.

 

10
0 6 631

I'm currently re-engineering an application from CSP pages directly accessing COS Methods, to an Angular/Material front end accessing a REST DAL.  Both the Angular front end and REST services are hosted from the same Caché instance and the same namespace, but the REST services have their own CSP application, with all calls being routed through a Dispatch class.  

00
0 5 372

Currently, I am working on a CSP application that is supposed to generate reports. Users will have varying access to said reports. To achieve that, I plan to use LDAP (because it's used in other systems where those users already exist). Documentation does not provide enough information, so I'd like a clarification:
Do I need to enable LDAP authentication for the whole Cache instance to use LDAP authentication in a single CSP application in that instance?

00
0 5 78

Hello, I'm trying to install CSP Gateway on Ubuntu 18.04 (Apache) with the installer CSPGateway-2018.1.1.638.0-lnxubuntux64.tar.gz but it doesn't seem to work.  I keep getting access-denied when I try to open CSP-pages or the CSP Management portal.

Does someone have an installation-manual or so ?

00
0 5 607

Hi!

I am not system admin. But it used to be very simple to install CSP Gateway on an apache system on Linux with Apache installed. I used to run the CSP Gateway installation program and after it was done, all I had to do was fine tune some configurations on CSP Gateway portal on http://<ip>/csp/bin/Systems/Module.cxw and I was up and running.

00
0 5 885
Article
David Crawford · Jul 31, 2019 2m read
Anti CSRF Methods

IRIS provides us with anti login CSRF attack mitigation, however this is not the same as a CSRF attack, as login attacks only occur on the login form. There are currently no built-in tools to mitigate CSRF attacks on api calls and other forms, so this is a step in mitigating these attacks.

See the following link from OWASP for the definition of a CSRF attack:

https://www.owasp.org/index.php/Cross-Site_Request_Forgery_(CSRF)

40
1 5 362

Hello,

I'm trying to set up an Apache server using CSP Gateway on Windows 10 (64-bit), but am getting the  error "Cannot load c:/InterSystems/IRIS_2019/CSP/bin/CSPa24.dll into server: %1 is not a valid Win32 application" when attempting to start up httpd.exe after adding the CSP-specific section to httpd.conf.

The CSP gateway is 64-bit (CSPGateway-2018.1.1.643.0-win_x64) and so is the Apache install (httpd-2.4.38-o102q-x64-vc14).

The CSPa24.dll file does exist in the specified location. 

Any suggestions appreciated.

Thank you,

Olga

00
0 5 398

New to CSP and Zen.  I've been going through tutorials and have made some progress.  Using the "Contacts" tutorial as an example, I'm trying to create a "ViewContact" page.  I want this to be linkable so I'm using URI Parameters, which I understand.  However, what I'm not sure about is how to retrieve a specific record.  Should I use a SQL statement?  If so, how?

00
0 5 201

Hello, has anyone tried to use Caché as a reverse proxy ?

We are trying to embed a dashboard server (Plotly Dash in this case, but it could be anything which runs on its application server) inside our application which is written in Caché.  
The dashboard/report server runs locally (for example, or inside a LAN) on port 8080, and has no authentication features, so we have to implement them on a different layer, and we'd like to use Caché for it.

10
0 5 273

We are using an F5 load balancer to route public traffic to our IS server. My goal is to block public access to the Management Portal, and only allow what we want to expose, such as REST/SOAP services. At the F5, they can block URL wildcards or specific ports, so those are our options.

Since the URLs for the web services are in the same path ([host]/csp/healthshare/[namespace]/*), I can't see any URL wildcards happening. That leads me to ports; is there a way to put services on a specific port for all services, and everything else stay on a standard web port?

00
0 5 236
Article
Peter Cooper · Mar 18, 2018 1m read
Replacing ZEN - Index to articles

Hi All
This is the index to a series of articles I hope to create over the coming months.

ZEN and ZEN Mojo are no longer being actively developed by Intesystems - this is a great shame as it is a fine product that works so well for business applications.
However ZEN is a 15 year old product and I need a path forward to replace the ZEN UI with a supported development framework.

This article is an index of the other articles I have, or plan to write. - the articles will be subject to change as I develop my thoughts and climb the learning curve.

120
1 5 966

Hi-

I am trying to create a simple example of allowing binary (tiff) files to be selected and uploaded asynchronously to an IRIS for Health back-end.   I have managed to write the HTML and Javascript which works great with regular text / ascii files, but fails with binary files.

When I upload a binary file (tiff) image I get garbage like this on the database server 

10
0 5 1,440