Syndicate content 0  
 
All time

As per the documentation of QueueCountAlert:
Number of messages on this item's queue needed to trigger an Alert message to be sent. Note that no further alerts will be sent unless the number of messages on the queue drops below 80% of this number and then rises again to this number.
Note that this alert will be sent even if AlertOnError is False.
Zero means no alerts of this type will be sent.

Now, the question is,
If QueueCountAlert is set to 10, and the queue size become 11 we will be getting email once.

0 6
0 560
Article
· Apr 4, 2016 1m read
2015.2.3 Maintenance Release

I am pleased to announce that Caché and Ensemble 2015.2.3 are now available as maintenance releases.
For a complete list of the corrections in 2015.2.3, please review the release notes.

Caché and Ensemble 2015.2.3 are available now for the same platforms as 2015.2.2

The complete set of supported platforms, including specific point releases and/or patches, is detailed in the Supported Platforms document.

2 0
0 566

Hello,

searching messages in our Message Bank is quite slow, often runs into timeout.

I wanted to perform a tune table on Ens_Enterprise_MsgBank.MessageHeader because this apparently has not been done yet - the Tune Table utility shows no entries for selectivity, etc.

I tried

 w $SYSTEM.SQL.Stats.Table.GatherTableStats("""Ens_Enterprise_MsgBank"".MessageHeader")

and got this error message

1 6
1 559

Hello,

I need to run some clean up routine in the background so loss of my terminal session won't stop the process.

I found the JOB command in the documentation.
JOB | ObjectScript Reference | InterSystems IRIS Data Platform 2022.1

When I try it, it doesn't seem to be doing much. I also expected this to become visible in the Background Tasks but that doesn't happen either.

Probably I am missing something.

1 5
1 560

At the moment I am trying to write a documentation file for a project and intend to use LaTeX for it.
Has anyone already had experience with this? I haven't found syntax highlighting with the LaTeX packages I know yet.
I found a request on Pygment but it was from 2016 and there was no reply on it since then.

Does anyone know a simple way for syntax highlighting COS in LaTeX?
Thanks for your input!

Martin

0 10
0 555

I've just installed Visual Studio Code, installed the InterSystems ObjectScript Extension Pack as documented here, connected it to a local InterSystems IRIS instance, and created a workspace associated with one of that instance's namespaces. However, after doing this, I don't see the ObjectScript button on the left toolbar when opening the workspace.

0 5
0 560

I'm a DBA and support Caché databases on AIX. I coded shell scripts for monitoring journaling status, databases size, license end date.

We recently got a new instance of Caché on Windows. I'm just curious to know whether anyone coded database monitoring scripts on Windows using PowerShell or any other scripting language.

If yes, please share the details.

Thanks & Regards,

Bharath Nunepalli.

0 3
0 562
Question
· May 24, 2019
Unlock the records

Hello,

I want to search a process ID in Object Script using the reference variable e.g. 1119102928 and kill that process ID. Please guide how it can be achieved.

Thanks in advance.

Vinay Purohit

0 6
0 559

InterSystems is pleased to announce the availability of the following maintenance releases:

  • Caché and Ensemble 2016.2.2
  • HealthShare Health Connect v15.021 on two core technology releases, 2016.2.2 and 2017.1.0

Caché and Ensemble 2016.2.2 are available on the same platforms as 2016.2.1

1 0
0 565

Hi Community,

We’ve got something exciting for you — it’s time for a new demo video contest, and this time, you’re in the judge’s seat!

📺 Demo Games for InterSystems Sales Engineers 📺

For this contest, InterSystems Sales Engineers from around the world submitted short demo videos showcasing unique use cases, smart solutions, and powerful capabilities of InterSystems technologies.

Now it’s your turn! We’re opening up voting to the entire Developer Community. Your insight and perspective as developers make you the perfect experts.

10 3
0 504

Hi folks!

Researching FHIR bundle transactions.

The idea is that you can post a bundle to a FHIR server with a set of resources. And you can send it as a transaction, so only all the resources will be published or neither.

E.g. I send a bundle of two resources: patient and its observation.

The observation resource should reference an existing patient. But it probably doesn't exist yet on the server and goes within the same bundle.

For this purpose there is a way to have a temporary id in the bundle, to let resources reference ids.

0 6
0 558

Hello Team,

please can someone help me in the below.

I'm trying to call a Rest API below specification working in postman, and receiving perfectly the response:

POST /PharmacyServices/api/Pharmacy/Upload?Key=aaaa&Username=bbb&Password=ccc HTTP/1.1
Host: abc:38440
Content-Length: 240
Content-Type: multipart/form-data; boundary=----WebKitFormBoundary7MA4YWxkTrZu0gW

------WebKitFormBoundary7MA4YWxkTrZu0gW
Content-Disposition: form-data; name="File"; filename="///xxxx/POC/CSV/20230607.csv"
Content-Type: text/csv

1 1
0 563
Article
· Jul 25, 2022 8m read
Introduction to Django part 2

In the first part, I've shown how to start a new project on Django, as well as define new models and add already existing models.

This time, I'll introduce an admin panel, available out of the box and how it can be useful.

Important note: do not expect that if you try to repeat actions from this post it will work for you, it does not. During the article, I had to do some fixes in the django-iris project, and even in DB-API driver made by InterSystems to fix some issues there as well, and I think this driver is still in development, and we will get more stable driver in future. Let's decide that this article only explains how it could be if we would have all done.

11 2
0 524

Hi Community,

We are pleased to invite all the developers to the upcoming InterSystems Analytics Contest Kick-off Webinar! The topic of this webinar is dedicated to the Analytics contest.

On this webinar, we’ll demo AtScale, InterSystems Reports (Logi), IRIS BI, IRIS NLP and answer the questions on how to develop, build, and deploy Analytics applications using InterSystems IRIS.

Date & Time: Monday, August 23 — 10:00 AM EDT

Speakers:
🗣 @Carmen Logue, InterSystems Product Manager - Analytics and AI
🗣 @Evgeny Shvarov, InterSystems Developer Ecosystem Manager

3 6
0 444

HI Community,

Now Intersystems has developers definitely cut-off from Zen/CSP I am looking for sample code how to invoke server-side methods from Angular and PHP, Java client.

I only see some rest/json crud examples, but that is not the whole picture I assume.

Let's say I have a persistent Class with a class method to import or modify data...

I want to invoke this from my Angular App or PHP app.

any examples, suggestions?

0 5
0 559

Hi,

I'd like to compare classes in two namespaces, whether the corresponding .cls code exist in both namespaces or not, and if it does exist in both namespaces, whether the CLS code is identical. If there is such a routine out there the better, I'd like to see it. If not, I know how to get a list of classes in each namespace and I can check currClss.TimeChanged. What I cannot find is the following:

0 8
0 556

I have just started to experiment with Using IRIS in Docker.

My first objective was to be able to enable global persistence within a Docker container. Using the following command I have managed to achieve this:

docker run --detach --publish 52773:52773 --volume /data/dur:/dur --env ISC_DATA_DIRECTORY=/dur/iconfig --name iris21 store/intersystems/iris-community:2020.1.0.199.0

Within this container, I have created a simple global:

for i=1:1:10 set ^tmp(i)=""

0 7
0 424

Hi Community!

You're very welcome to watch a new video on InterSystems Developers YouTube, recorded by @Stefan Wittmann, InterSystems Product Manager:

InterSystems API Manager Introduction

https://www.youtube.com/embed/vO6kz1G4eVg
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

5 0
1 564