Hi.

Is there any function to validate JSON string returning status?

Regards,
Matjaž

Greetings.

I have a scenario in ENSEMBLE, where a business process router A is dependent on another business process router B.  If B shuts down for some reason, A has to be disabled as well.

Do i need to write a custom process for B and call the call back method onShutdown or something?

Any suggestions would be appreciated.

Thanks,

Jimmy Christian.

Can I get help with connecting a node-based client with the IRIS DB? Need the same for firing queries with node-based Cypress framework ?

There is several classes that allow to create TCP/IP connections (eg: to connect to a service).

Example : %Net.FtpSession (port 21), %Net.HttpRequest (usually port 80 or 443)

AFAIK connection will stay open unless closed explicitly or if variable that hold the instance is garbage collected.

Is there a way to get a list of all active (open) TCP/IP connections IRIS is maintaining so far ?

I took a look at Portal (eg: in dashboard, "System Resource Statistics") but couldn't find anything.

Hi Developers,

This July, you've posted the whooping 83 new questions on the Developer Community: 

Hi,

I try to initialize some properties of a %DynamicObject during his creation.

I Try to use InitialExpression this way :

Property refDate As %Date [InitialExpression = $piece($horolog,",",1)];

But it doesn't compile

I don't found if %DynamicObject can have a constructor to initialize properties by a calculated value, like other languages.

I'm trying to read data from a file and it contains single precision (4 byte) float values.  Does Iris/Cache' have a way to convert the binary into a Cache' variable that is accurate?

ZW RECORD
RECORD="EDID"_$c(17,0)_"fLargeRefMinSize"_$c(0)_"DATA"_$c(4,0,0,0,0)_"DGMST&"_$c(0,0,0,0,0,0,0)_"d"_$c(14,0,0,30)_"h+"_$c(0)_"("_$c(0,0,0)_"EDID"_$c(22,0)_"fBribeSpeechcraftMult"_$c(0)_"DATA"_$c(4,0)_"ÍÌÌ=GMST"_$c(28,0,0,0,0,0,0,0)_"c"_$c(14,0,0,30)_"h+"_$c(0)_"("_$c(0,0,0)_"EDID"_$c(12)

The float DATA value for "f" LargeRefMinSize is $c(0,0,0,0) which is obviously 0.

The float DATA value for "f"

Hey Community,

Here is a digest of the Developer Community videos on InterSystems Developers YouTube Channel in July 2023:

The documentation https://docs.intersystems.com/ens201817/csp/docbook/DocBook.UI.Page.cls… says "You can also obtain this routine [%fm2class] as an XML file and install it in Caché or Ensemble version 5.0.* or higher."

How do I get that XML file?

If it's already part of Cache 18.1, you could also just tell me how to access it.

Thanks!

I'm trying to create a simple mirror with two Cachés 2016.2.1.803 Instances,

but after i create the mirror with the primary and try to connect the fallouver server, i receive the following message:

ERRO #2071: Erro ao recuperar informações do conjunto espelho para 'BPLUS'. Erro: Connection failed: Unexpected error: <READ>SSLServer+191^MIRRORCTL

i'm not using ssl on this configuration, tried with arbiter and without, same effect.

Tried with Caché 2018.1 and Caché 2016.2.1, same problem.

Some tips?

Best,

Hi Developers,

Watch this video to learn how InterSystems is supporting new regulatory requirements:

⏯ Regulatory Roundup: What’s New in the Interoperability Arena @ Global Summit 2023

Hi,

Using Interoperability, I can't figure out how to create separate XML's files from a CSV-file using the GUI-features Record Maps/Complex Record Mapper -> Data Transformations. I'm familiar with reading/writing the files using File Service/Operation, but don't understand the processing-steps. The preferred method by my colleagues is to do this without any Objectscript or Embedded Python coding, but if this can only be done by some coding that's fine as well.

See example below. Any help is appreciated!

Kind regards, Ties Voskamp

Example CSV:

PONumber;PODate;ArticleID;ArticleName;MeasureOfUnit;Uni

I asked the question in email and get answers from those colleagus.

Question:

I failed to change time zone on latest iris container(Ubuntu), because:

• I am irisowner, no root password

• There is no sudo command

I used to use below Dockfile setting to change time zone while creating a new docker image. However, those commands doesn’t work from non-root user.

FROM $IRIS_IMAGE:$IRIS_VERSION
USER root
RUN export DEBIAN_FRONTEND=noninteractive; \
    export DEBCONF_NONINTERACTIVE_SEEN=true; \
    echo 'tzdata tzdata/Areas select Asia' | debconf-set-selections; \
    echo 'tzdata

The 2023.2 releases of InterSystems IRIS Data Platform, InterSystems IRIS for Health, and InterSystems IRIS Studio are now Generally Available (GA).

RELEASE HIGHLIGHTS

2023.2 is a Continuous Delivery (CD) release. Many updates and enhancements have been added in 2023.2:

Private Web Server

Starting with this release:

• Local InterSystems IRIS installation will no longer install the private web server. Access to the Management Portal and other built-in web applications will require configuration of a connection to an external web server. Installation will include the option to automatically configure

InterSystems announces its seventh preview, as part of the developer preview program for the 2023.2 release.  This release will include InterSystems IRIS and InterSystems IRIS for Health.

Discontinuation of the Private Web Server (PWS)

A major topic in this release is the discontinuation of the Private Web Server (PWS) from the installers.  This feature has been announced since last year and it's removed from InterSystems installers, starting with this developer preview.

See this note in the documentation. Additional information related to this topic can be found here.

--> If you are facing any

Overview

We often run into connectivity problems with HealthShare (HS) deployments in Microsoft Azure that have multiple HealthShare components (instances or namespaces) installed on the same VM, especially when needing to communicate to other HS components while using the Azure Load Balancer (ILB) to provide mirror VIP functionality.  Details on how and why a load balancer is used with database mirroring can be found this community article.

As per Azure Load Balancer documentation, https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview#limitations, the Azure Internal Load

Our previous code golf ended with an overwhelming win, so now it's time for another one. Parenthesis Hell is a Lisp-like esoteric programming language(esolang). As a Lisp-like language, the code consists only of nested matched pairs of opened and closed parenthesis. Your task is to write a method that receives a string of parenthesis and returns 1 if the order of the parenthesis is valid. For example, the string of parenthesis (())() is valid because it contains a matched pair of opened and closed parenthesis at each position. The string ()((()))) is not valid because it contains one unmatched parenthesis.

Hi,

Any recommendations on how i can add a logic if an incoming record that is already existing in the table but different total amount value. I need to subtract the totalamt value on the input file vs the totalamt value on the table and update the table with the difference of totalamt. Any help is much appreciated. Thanks!

Set tSC = $$$OKTry {
s tEntEpicMoopRecord = ##class(MC.Data.EntEpicMoopFile).MemberIDIndexOpen(pRequest.MemberID)
if $ISOBJECT(tEntEpicMoopRecord) {
s tEntEpicMoopRecord.DateUpdated = +$h
s tSC = tEntEpicMoopRecord.%Save()
}
else {
s tEntEpicMoopRecord = ##class(MC.Data.EntEpicM

First time setting up a SSL/TLS connection, and I am running into issues when I call it from within a Business Operation.

Recently I started moving some of our JDBC Gateway configurations over to using the Microsoft JDBC Gateway driver instead of using the jTDS open source driver. I have noticed since then that those Objects that are using Microsoft JDBC Driver are throwing a lot more errors than the jTDS driver ever did, which I can understand however I am puzzled that I keep running into an issue with the Java Gateway Service within the Interoperability engine.

Every so often I will start seeing "Gateway Server failure timeout on 127.0.0.1:55550" followed by "Gateway Server did not respond to PING request..." Ev

InterSystems FAQ rubric

You can set individual error pages for the following Web Gateway error messages/system responses:

• server error
• server busy
• server unavailable
• server timeout
• connection closed

Settings are made on the Web Gateway Management screen ([Management Portal] > [System Administration] > [Configuration] > [Web Gateway Management] > [Configuration] > [Default Parameters]).

In the Error Page section of the Default Parameters menu, set the filename of the html page to display or the URL to redirect to when an error occurs.

Hi community,

I have an incorrect InterSystems Server Credentials password stored by the Workstation Keychain in VS Code. VS Code is trying to use this incorrect stored credential to access the server and does not prompt or allow me to input a different password. I do not see any settings associated with the Keychain or resetting those credentials. Does anyone know of the process to delete or replace a stored password here? 

Thanks!

Hannah 

I noticed that the XCPD processor has a setting for PDQ minimum threshold and maximum record count returned, but PDQ does not have these settings. Can anyone explain why? They are essentially the same service.

I'm trying to track down documentation on how HealthShare + HSPI prioritizes patient demographics that are returned in various scenarios. I've done some experimenting but was looking for some confirmation.

1. HSPI  - It's my understanding that trusted tiers and aging factors only impact the HSPI management UI experience. That they are not incorporated into patient search response. Can someone confirm this?

2. Patient Search Response (Clinical Viewer, PDQ, XCPD, FHIR) - Only Registry demographics are used. Nothing from HSPI or Patient SDA.

3.

Good morning,

first of all thank you for taking the time to read and answer this question.

Recently, since we have upgraded to HealtShare 2020, we experienced the fact that when opening in the Studio the Process (.bpl) and Transformation (.dtl) classes, it asks us to log in, i.e. username and password, almost every time we open a new Process or Transformation.

However, in previous versions, I think we had HealthShare 2016 or 2017 or 2018, and in it, you could log in from the Studio in Processes and Transformations, logging in 1 time only.

Is there any way to allow Studio users to preserve their

Have Docker running in Ubuntu and successfully downloaded IRIS Healthcare ML Community to local machine.

Cannot figure out how to launch IRIS...help!

Thanks, all...

Martin Arnold

Hi Developers, I'm currently doing a demo about building a front end UI doing data analytics and setup a performance test with large data objects, therefore using "Populate Utility" could help me auto generate some sample data that I can play with.

Within this post I would like to share my experience of using Populate Utility, including using POPSPEC Parameter.

1.

I would like to search for all messages where their body size is greater than 3MB. 

I have searched through the common Header and body properties and I have not found a size property. I have looked at the extended properties but I am unsure if any of the extended classes allows me to find the Doc size. 

I have stepped through most of the body property classes related to messages or documents that have an exposed property that filters by document or message size. 

Is there a way to do this within the Message Viewer or Terminal? 

Thank you in advance. 

Dan 

Hi Everyone, 

Join the next online Developer Roundtable on July 27 to discuss how to optimize your dev practices. We'll have 2 short demos from our experts, time for Q&A and open discussion.

Invited experts: 
@Timothy Leavitt , Development Manager, InterSystems
@Alex Woodhead, Senior Systems Developer, InterSystems
@Evgeny Shvarov, Senior Manager of Developer and Startup Programs, InterSystems

UPDATE: see the recording below or watch on YouTube

Hello,

I need AES ECB with PKSC7 padding for an interface.
Unfortunately, the %SYSTEM.Encryption.AESEncode cannot do this.

Therefore I wanted to include the following python lib.
PyCrptydome -> https://pycryptodome.readthedocs.io/en/latest/index.html

We need to install the package offline on the system. So I downloaded it and put it in the MGR/Python/ directory.

However, when I try to install it, I get the following error message:

E:\HealthConnect\20201\bin>irispip install E:\HealthConnect\20201\Mgr\python\pycryptodome-3.18.0.tar.gz --target E:\HealthConnect\20201\Mgr\python pycryptodomex