#InterSystems IRIS

I have a Task that I am trying to write the output to a file. How do I check for if the Output File has been included in the Task Schedule, so I can direct my output of my class to that output file?

Thanks

Scott

Hi Guys,

How can I create Python pages instead of CSP or Zen pages, not familiar with Python and the only way I know is using embedded Python as methods as attached below?  

Thanks

Let's suppose two different routines use one and the same chunk of code. From the object-oriented POV, a good decision is to have this chunk of code in a separate class and have both routines call it. However, whenever you call code outside of the routine as opposed to calling code in the same routine, some execution speed is lost. For reports churning through millions of transactions this lost speed might be noticeable. Any advice how to optimize specifically speed?
P.S. Whenever someone is talking about the best choice for whatever, I am always tempted to ask: "What are we optimizing?".

InterSystems FAQ rubric

To enable Interoperability functionality after creating a namespace, use the EnableNamespace method of the %EnsembleMgr class:

do ##class(%EnsembleMgr).EnableNamespace()

Hi Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ Migrating 20TB to InterSystems IRIS with Near 0 Downtime @ Global Summit 2024

How would you go about creating an SQL Stored Procedure that would result in the same output as "IN LIKE"?
For example...
CustomersTable

select *
from CustomersTable
where inLike('%Mark%', '%John%')

Would return:

Hi Developers!

As you know the concept of ObjectScript Package Manager consists of ZPM client - client application for IRIS which helps you to install packages from the registry. And the code which works "on the other side" is  ZPM Registry - server which hosts packages and exposes API to submit, list and install it. Now when you install the ZPM client it installs packages from community package registry, which si hosted on pm.community.intersystems.com

But what if you want your own registry? E.g. you produce different software packages for your clients and you want to distribute it via private registry?  Also, you may want to use your own registry to deploy solutions with different combinations of packages.

Is it possible? The answer is YES! You can have it if you deploy ZPM registry on your server with InterSystems IRIS.

To make it happen you would need to set up your own registry server.

How to do that?

Hi IRIS experts!

I have a parameter in a class that stores a global name:

Parameter GlobalName = "^AGlobal";

then I'm trying to call it as:

set gn=$name(..#GlobalName)

to use it later as:

set @gn@("index")="value"

But! I'm having syntax at set gn=$name(..#GlobalName)

What am I doing wrong?

Hello,

I have a class with a "Unique" index (pxfactidIndex) on a %Numeric property (pxfactid) (partially-edit code snippet below):

Property pxfactid As %Library.Numeric(MAXVAL = 9223372036854775807, MINVAL = -9223372036854775808, SCALE = 0) [ SqlColumnNumber = 7 ];
Index pxfactidIndex On pxfactid [ Unique ];
Storage Default
{
<Data name="FactDefaultData">
<Value name="1">
<Value>pysubjectid</Value>
</Value>
...
<Value name="6">
<Value>pxfactid</Value>
</Value>
...
</Data>
<DataLocation>^CRMBI.FactD</DataLocation>
<DefaultData>FactDefaultData</DefaultData>
<ExtentLocation>^CR

I want to add a database to a mirror.

Is this the correct way to do so:

set status=##Class(SYS.Mirror).AddDatabase("/db/iknow")

Is the status=0 if it worked and anything else means it failed?

Thanks for any help

Hi Community,
i'm trying to figure out how to pass a string to a routine from Powershell:
 

####

ROUTINE ImplUtil

Say(pSomething = "hello, i'm the ROUTINE") public{
    w !,pSomething,!
}

####

call: irissession healthconnect -U user 'Say^ImplUtil(12345)'

what's the right way to pass in text?

Join our next in-person Developer Meetup in Cambridge to explore the latest trends, tools, and features for innovating on data. This time we will dive into Building and Evaluating Agentic Generative Retrieval Systems.

Talk 1
Agentic Retrieval: Techniques beyond Vector Search
Speaker: Suprateem Banerjee, Sales Engineer - AI Specialist

Talk 2
Setting up testing frameworks to quantitatively measure improvements in agentic systems
This talk with cover how open source libraries such as langfuse and deepeval can be leveraged to see how improvements to prompts, llm models and tools change an agent / RAG system's performance. We will briefly cover how these systems work before delving into how they can be combined together.
Speaker: @Jayesh Gupta, Solutions Developer, InterSystems

>> Register here

⏱ Day and Time: July 9, 5:30 p.m. to 7:30 p.m.
NEW VENUE ALERT:
📍Amazon Boston Office, 55 Pier 4 Blvd, Boston, MA 02210

In the previous article, we told you about python and dashboard, and in this article I will compare them with each other.If you are just about to get started with visualization in Python, the number of libraries and solutions will definitely amaze you:

• matplotlib
• Seaborn
• Plotly
• bokeh
• Altair
• Folium

A visualization in some libraries, such as Matplotlib, is a simple static image, which is good for explaining concepts (in a document, on slides, or in a presentation).

George James Software is excited to share a new release of Deltanji source control, version 8.1. This new release introduces a Git Location Driver along with several other functionality and usability improvements. 

Highlights of this release include: 

• Git Location Driver, which enables Deltanji to integrate directly with Git repositories.
• Additional signing methods for Task Server II.
• DATA Component Driver proxy classes.
• Add or remove from Work Lists incrementally. 
• %ALL system definitions.
• New Installation defaults.

I have a stream that I read out until the end. I then append more content to the stream and want to read out only what has been added. How do I only read out the new contents of the stream? Essentially, I want to read a stream, record the end position, then once the stream is updated read the contents from that recorded position until at the new end. This stream needs to be kept intact for historical reference so cannot be cleared between reads.

For a long time I have wanted to learn the Django framework, but another more pressing project has always taken priority. Like many developers, I use python when it comes to machine learning, but when I first learned web programming PHP was still enjoying primacy, and so when it was time for me to pick up a new complicated framework for creating web applications to publish my machine learning work, I still turned to PHP.

Is a layer before the internal HTTP of Caché/IRIS, such as a Reverse Proxy or API Gateway, a good option?

Example: I have an API using %CSP.REST, and I am using the internal port for development. But for production and approval, I put a reverse proxy using NGINX. Is this recommended? Is it an alternative?

Diagram.

Hi Community,

I have created global with below values , now I want to iterate programatically.

^Book("Auto1","Properties","Color")="Red"
^Book("Auto1","Properties","Color1")="Yellow"
^Book("Auto1","Properties","Model")="SUV"
^Book("Auto2","Owner")="Prashanth"
^Book("Auto2","Properties","Color")="Green"
^Book("Color")="Red"
^Book("Color1")="Red"

i have used below method but only printing last2 elements properly

ClassMethod Iterate()
{
set subscript = ""
for {
set subscript = $order(^Book(subscript))
quit:(subscript = "")
write !, "subscript=", subscript, ", value=", ^Book(subscript)
}
}

Thanks,

Prashanth

We're planning to use Production Validator for validating our system upgrade (2016.2.3 to 2024.2) , and we are trying to understand what kind of benchmarking or performance metrics others have observed during similar efforts.

Specifically, we are looking for a case study or real-world example that includes details like:

• How many messages were validated?
• How long did it take to create the temporary database from the source system?
• How long did it take to run the comparison on the destination system?

You know that feeling when you get your blood test results and it all looks like Greek? That's the problem FHIRInsight is here to solve. It started with the idea that medical data shouldn't be scary or confusing – it should be something we can all use. Blood tests are incredibly common for checking our health, but let's be honest, understanding them is tough for most folks, and sometimes even for medical staff who don't specialize in lab work. FHIRInsight wants to make that whole process easier and the information more actionable.

Hello,

I am currently trying to install InterSystems IRIS for Health and specifically the Ensemble integration tool, but I am facing issues.

Here are the details of my setup:

• Version of IRIS: 2025.1 (Community Edition)
• Operating System: [Insert your OS here, e.g., Windows 10, Ubuntu 20.04, etc.]
• Issue: I have downloaded IRIS for Health, but I cannot find Ensemble during the installation process. I have tried using the Early Access programs, but Ensemble is not included in the options I can choose. I have also tried installing various versions of IRIS, but still, Ensemble is missing.

IRIS supports CCDA and FHIR transformations out-of-the-box, yet the ability to access and view those features requires considerable setup time and product knowledge. The IRIS Interop DevTools application was designed to bridge that gap, allowing implementers to immediately jump in and view the built-in transformation capabilities of the product.

Google Forms is the most popular solution on the market for collecting data, answering questionnaires and quizzes. So, it is the ideal solution for collecting patient data and responses in a practical way, without the need to expand or develop systems. In this article, I will detail how to create an account on Google Cloud, register the application that will consume the Google Forms API, generate the service user necessary to consume the API and finally perform actions to create new forms and collect data filled in them in an automated way in embedded Python and IRIS.

Profiling CCD Documents with LEAD North’s CCD Data Profiler
Ever opened a CCD and been greeted by a wall of tangled XML? You’re not alone. Despite being a core format for clinical data exchange, CCD's are notoriously dense, verbose, and unfriendly to the human eye. For developers and analysts trying to validate their structure or extract meaningful insights, navigating these documents can feel more like archaeology than engineering.

Hi all!

I want to create an %Embedding.Config to use with an %Embedding property. I followed the documentation for %Embedding.OpenAI, and it works fine after setting sslConfig, modelName, and apiKey.

However, I need to use AzureOpenAI. While the embedding process is similar to OpenAI's, Azure requires additional connection parameters, like an endpoint. My question is: is it possible to configure these extra parameters with %Embedding.Config, and if so, how?

documentation reference

Kong provides an open source configuration management tool (written in Go), called decK (which stands for declarative Kong)

• Check that decK recognizes your Kong Gateway installation via deck gateway ping

deck gateway ping   
Successfully connected to Kong!
Kong version:  3.4.3.11

• Export Kong Gateway configuration to a file named "kong.yaml" via deck gateway dump

deck gateway dump -o kong.yaml

• After modifying the IP adcresses in kong.yaml file, show the differences via deck gateway diff

deck gateway diff kong.

Hi community.

I was wondering if it was possible to use something like EnsLib.SQL.InboundAdapter with tables in IRIS.

This library monitors when a record has been inserted into a table in an external database, so it requires a DSN to connect to that database.

My goal is to make a call to an external API that takes a long time, it could spend nearly an hour (or more) completing its processes, but I don't want to block the main process.

My use case is I want AI to extract six pieces of key information from medical visit notes.

It works okay with notes from Epic patient portals. I am struggling with one of my own visit Summaries. So far I have not been able to instruct ollama to give me a JSON response where it gave me what I am asking for.

My original medical_progress_notes_prompt was:

Medical progress note:
---
(document)
---

You are an expert in analyzing medical progress notes.

Template engines are essential for producing customizable dynamic content, without the need for compilation and opening up great possibilities of extensibility for the template user. Especially if the template engine supports Python. A popular solution for template engine is Mko. It is is a template library written in Python. It provides a familiar, non-XML syntax which compiles into Python modules for maximum performance. Mako's syntax and API borrows from the best ideas of many others, including Django and Jinja2 templates, Cheetah, Myghty, and Genshi.

Hello everyone,

I’m using VS Code with the InterSystems ObjectScript extension and I want to keep my local folder (client-side) as the “source of truth” while still using the built-in Server Source Control features (diff, stage, commit, etc.) against my IRIS/Ensemble instance.

So far:

• I have a local Git repository with my .cls and .mac files.
• I’ve configured "objectscript.serverSourceControl.respectEditableStatus": true and "objectscript.serverSourceControl.disableOtherActionTriggers": false in my .vscode/settings.json.