I have a need to query and retrieve DICOM images using the 'pull' method of C-FIND and C-GET.  I have seen examples in Ensdemo where Ensemble is a target of pushed messages.  Has anyone used Ensemble this way?  If so,  can you share and example?

Hi,  The ZEN Mojo Widget reference at ../csp/sys/%ZEN.Mojo.WidgetReference.bootstrap33xHomepage.cls is a great reference for viewing the different components available with each helper plugin - and it also supplies snippets of JSON code to use in your layout definitions.

I'm having problems with the Bootstrap $navbar component however. This is layout definition, with a navbar and button contained within the bar.:

I was trying to modify the REST.DocServer sample in the SAMPLE namespaces to use the new %Object and %Array system objects (Ensemble 2016.2 build 636) with the following changes:

/// This method returns a list of namespaces for this server

ClassMethod GetNamespaces() As %Status

{

    #dim tSC As %Status = $$$OK

    #dim tList,tNS,tFilteredList,tValue As %String

    #; Get the list of namespaces

    Do List^%SYS.NAMESPACE(.tList)

    Set tNS="" For  {

        Set tNS=$Order(tList(tNS),1,tValue) If tNS="" Quit

        #; Only want namespaces which are enabled and are not remote

I get NOROUTINE when I try to call a label in a routine in another namespace:

d someLabel^|”OTHERNAMESPACE”|someRoutine(inputVar,.resultByReference)

Two questions:

1.  What is wrong with my syntax for calling a label in the other routine, versus just the root of the .int/mac?

2.  Can I pass a parameter by reference when using extended routine reference?

Hello,

It is time for me to eat my own dog's food and start implementing unit test running with coverage :) I will be inundating IRC with questions at this point, but I have a more general question first.

In this tutorial, it is supposed that your unit tests are exported as XML first... But that's not very practical. Is there a way, instead, to run all tests from a given project without having this export?

My first thought on how to do this would be to:

Hi,

Is it possible to have a ZEN Mojo application that uses Bootstrap and controls from jQMobile ?

In a fresh installation running Zen Mojo version 1.1.1, my ZEN Mojo page declares:

Parameter CSSINCLUDES As STRING = "bootstrap-3-3-5/dist/css/bootstrap.min.css,jquery.mobile-1.4.5.min.css";
Parameter JSINCLUDES As STRING = "jquery-1.10.2.min.js, jquery.mobile-1.4.5.min.js,jquery-1.11.3.min.js,bootstrap-3-3-5/dist/js/bootstrap.min.js";
..

and a pageContents of:

I looked at the tag cloud (It looks more like a solid block since it is fully justified and sorted by size.)

https://community.intersystems.com/tagclouds/chunk/1

It is currently sorted by size (large -> small).  It feels not like a traditional tag cloud.  It feels harder to find what I want than a traditionally styled tag cloud.  

I think it should be sorted alphabetically?  and center justified? 

Most tag clouds I see are sorted alphabetically allowing the font sizes to intermingle and create clarity of terms.(In our cloud, there is no visual indicator between tags, they all seem to run together)

The recent post about help with the Cache Language and the responses were very helpful.

I suggest two new tags, and the tags being permanently toward the top of the tag list.

1) Help with understanding the Developer Community

2) Help with Cache and all the various off-shoots 

Hello,

Still related to the unit test with coverage support project, one goal is to make that package available to everyone.

One possible way I already know of is that all fully qualified class names (ie, the package + the class name) start with %, which mean that on installation all classes will end up in the %SYS namespace, but this requires that the install be done as a user with the necessary privileges to write to %SYS.

Getting around to wrapping up a short tour in Professional Playtime, I wanted to share my experience at the HIMSS FHIR Connectathon I participated in out in Indy in April.

Has anyone noticed that the Feature Map and Master Index was dropped from the 2016 version?

Anyone know why?

Please see the attached file of a screen shot.

Well, I have a screen shot file, but when I try to up load .docx, or .pdf, or html I am prevented, don't know why?

Yes, frustration!

What would be the preferred method to create an HL7 message from an input that is not HL7?

Would it be better to take the non-HL7 input and construct an HL7 message in the business service that then gets passed off to a routing process, or would it be best to just pass the non HL7 message to a routing process that called a data transformation to create the HL7 message?

My thought is the later, due to the fact that updates to the creation of the HL7 message are done using the graphical DTL editor rather than editing COS in the service.

I have two servers in our TEST environment.  One with HSBUS and one with HSREGISTRY.  Let's call them "HSBUS01" and "HSDB01" respectively.

Now, I can access HSBUS with my SQL client by using the JDBC driver pointed to hsbus01.full.name.com and port 1972 and specifying a namespace of "HSBUS".  I am, however, unable to access the HSREGISTRY instance via SQL with a similar combination of information.

We have a query that looks something like:

select a, b, c, d, e, f

from tbla inner join tblb on tbla.....

This query runs in the expected 200-400 ms range.

If we run the same query but reduce the select to just:

select a

from tbla inner join tblb on tbla.....

then the query runs for 30 minutes or more. 

The rest of the query is identical.  Is there a logical explanation for how this can happen?

Thanks.

I have to disect thousands upon thousands of strings like this:

96842-2-AEV.00001-63561-001958-100728760I-42

I've been able to pull out the first, second and final segments as separated by hyphens, but now I have a predicament where I need to use the second segment, the 2 shown in the example above, in a join to another table.  Problem is Cache apparently doesn't like doing that.  Just the same, I have to find a way.

Here's the code I'm using to pull that segment out into as separate field in the query results:

Here's a screenshot from the summary page, highlighting a couple of timestamps:

But when I open the article, here's what the posting reports:

And the timestamps of the two answers:

So why does the summary page report that the posting and the last answer are many hours more recent than they seem to be when I look at them?

Hi Community,

How can I create a JSON with the object ID by using the %Object:$toJSON API?

I have the following piece of code bellow where I create an object reference, create a %Object instance from %fromObject and them I am creating the JSON from $toJSON, but it does not expose the %ID (object id). How is the best approach to create a JSON with the respectives object IDs?

I would like to know how to close a dropdown list after selection, and also how to set the selected value to the list first to be displayed.

I can get the value by clicking the dropdown but not back to the initial state and also does not display the selected

Thanks

I'm trying to find a good way to control the Filename for X12 Acknowledgement files, but there doesn't seem to be a way to do that without custom coding.  Here's what I figured out so far:

EnsLib.EDI.X12.Service.FileService allows you to set a Reply Target Config, which would likely be an X12 File Operation.  The Service doesn’t have any settings related to the name of the Acknowledgement file though.  That’s determined entirely by the Operation.

Starting with 2016.2 the Java XEP binding will no longer support the in-memory connection mode. The in-memory mode was deprecated in earlier versions and applications should switch to the TCP/IP connection mode instead.

The TCP/IP connection mode has bridged the gap in performance to a large extent over the past couple of years and enables the Java client to run on a remote machine.

Let me know if you have any questions or concerns.

This is a cross-post from our compatibility blog: http://blog.intersystems.com/compatibility/2016/04/22/removal-of-in-mem…

Starting off with a working REST interface, I can access the CSP Application definition screen for the application  (System > Security Management > Web Applications > Edit Web Application), and "turn off" the application by clearing the Enabled: [ x ] Application checkbox. From then on my REST calls return an HTTP 404 error. (That's expected).

However - one expects that re-enabling the Application in the CSP Application screen, would return my REST services to a working state, however, this is not happening.  All REST requests continue to return an HTTP 404 error.

(Possibly?) little-known fact: It's possible to use $ListBuild on the left hand side of the equals sign in a set command to extract multiple list values at once:

For example:

See for reference: http://docs.intersystems.com/cache20152/csp/docbook/DocBook.UI.Page.cls…

Hello,

Here's the code:

Learn the fundamentals of how and when to use the DeepSee Analyzer. 

Hi,

I'm posting this for the benefit of others. Not often one changes certificates in Cache, at least in my case. I run a system, that uses certificates to encrypt SOAP messages, and since the last time I ran it, my certificates expired.

So I renewed them using our PKI tool, so far so good. I gave all (3) certificates the same names (and filenames too) as to those expired, thinking that everything would just work fine next time I call the SOAP service.

Unfortunately, I got trapped.

I just recently got a mail regarding the latest and greatest.

I find the mail impossible to read or make any sense of.

At the bottom it says to manage my subscription.

I clicked on the link and it took me to a page that says I am denied.

All the time I am still logged in.

Then, can you tell me how do I manage my subscriptions and stop those impossible emails?

I sure wish we were back to the Google Group, I understood that.

Introduction

I've been using iFind indices in one of my applications but this morning discovered that the index is missing data. I confirmed the issue also exists in our test environment and rebuilt the indices there. That seems to have fixed the immediate problem. However I'd like to understand how this came about to avoid it happening in the future.

Has anyone encountered this before and know the cause?

Please see attached screenshot

In "My Content" and "My Collaborations" headers for answers are shown with some internal Ids.

I think it should be just name of the corresponding question.

I followed the Documentation instructions to install Caché on my Linux box and it seems to be running fine except when I try to modify the configuration.  I keep getting errors that a previous cache.cpf file (e.g., cache.cpf_8503) cannot be opened.  Is my Linux "user who owns instance" account deficient in Linux permissions?