#SQL

I am using a JDBC connection to MS SQL server to execute a stored procedure to select data and bring it into InterSystems as a EnsLib.SQL.Snapshot. I loop through the EnsLib.SQL.Snapshot using a while loop, but I also want to iterate through the Columns within that Row to do logic.

Is there a way to iterate through the Columns of the current Row of the EnsLib.SQL.Snapshot so I can apply logic/rules for further processing?

Thanks

Scott

Hello all,

We have our system with AutoParallel enabled:

USER>w ##class(%SYSTEM.SQL.Util).GetOption("AutoParallel")
1

But whenever I try to run any sql the autoparallel does not work. For example, this simple query:

When I force it with %PARALLEL we can see it will effectively run in parallel:

The total records is bigger than the threshold. So, what can go wrong? Anyone in the same situation?

I'm playing with some anayltic queries against FHIR server tables. The HSFHIR_X0002_S_Patient.addressCity table contains a lot of cities which names contain german charachers such as ä, ö and ü.

The following query works fine:

select value from HSFHIR_X0002_S_Patient.addressCity

But this one converts city names to uppercase, and characters with umlauts are lost, so instead of "Köln" or "München" I see KOLN and MUNCHEN:

select ac.value, count(ac.value) as cnt
  from HSFHIR_X0002_S_Patient.addressCity ac
  group by ac.value
  order by 2 desc

I'm using DBeaver with IRIS official JDBC driver.

I HAVE A NEW SQL CLASS THAT DISPLAYS ENTRIES BASED ON THE FIRST 2 NODES OF A GLOBAL. I FOUND OUT THAT THE CLASS ALLOWS FOR AN ADDITIONAL NODE(s) TO BE INSERTED IN THE "User Specification Node:" along the delimiter and the Piece in the NewStorage Map1 for "ModifyDDDD" shown below. it is not working.

^GBL("AA","SSSSSS")="1:1:1:1:"

^GBL("AA,"MD",1,1)="1:"

^GBL("AA,"MD","A",1)="0:"

I HAVE USED THIS:

<Data name="ModifyDDDD">
<Delimiter>":"</Delimiter>
<Node>"3,4"</Node>
<Piece>1</Piece>
</Data>

WHILE IT COMPILES IT DISPLAY NOTHING. MY QUESTION IS WHAT IS THE RIGHT SYNTAX AND PUNTUATION FOR THIS, PLEASE?

InterSystems FAQ rubric

By default, the order of columns in a table is determined automatically by the system. To change the order, explicitly set the order for each property using the property keyword SqlColumnNumber when defining the class.

Example:

Property Name As %String [SqlColumnNumber = 2];

Please see the documentation below.

SqlColumnNumber

If you want to change the SQL table name, specify SqlTableName. If you want to change the column name (field name), specify SqlFieldName.

Both apply only to persistent classes.

Hi,

A customer today asked whether we could offer anything like the nice lineage charts that dbt offers, based on SQL view metadata. They are very much aware of our dbt-iris adapter, but were asking in the context of their landing area, which combines foreign tables and views, ahead of possibly using dbt for onward transformations.

Hello,

Is there a programmatic way (in ObjectScript) to determine if a string is an SQL reserved word (aside from using embedded SQL to try to name a property with that string and look for the error :-))?

Thank you,

Jean

Has anyone successfully tested the new THROUGH command in IRIS 2024.2 with a FOREIGN SERVER?https://docs.intersystems.com/iris20242/csp/docbook/Doc.View.cls?KEY=RS…

I have connected from a Docker instance to a VM. I was able to successfully set up the JDBC connection through the UI.

I then configured a foreign server with this connection:

But I am unable to send a SQL 'THROUGH' to the DB. I always get a:

I've get the same message if i try it via Management Portal.
I've also tried this:

and this

i am trying to embed a dynamic SQL into Objectscript code , but the %NEXT() will return 0 , however when i copy the same query and run it in the SQL bit it will give me the result i want 
the code :

Description

This is a template for a FastApi application that can be deployed in IRIS as an native Web Application.

Installation

1. Clone the repository
2. Create a virtual environment
3. Install the requirements
4. Run the docker-compose file

git clone
cd iris-fastapi-template
python3 -m venv .venv
source .venv/bin/activate
pip install -r requirements.txt
docker-compose up

Usage

The base URL is http://localhost:53795/fastapi/.

Endpoints

Does InterSystems IRIS has a MEDIAN (or percentile) calculation in SQL?

User-defined aggregate functions have been supported in IRIS since 2021.1.0. I'd wished upon a star for these years ago before finding a secret hacky way to override MAX and MIN in a custom datatype, but didn't get a chance to actually try one out until today. I thought it was an interesting experience/example - the question of how to get a Median in IRIS SQL came up once before - so I'm sharing it here without too much further comment.

I'm experimenting with adapting SDA3 object model to store medical data in relational form, e.g.:

class Demo.DemoPatient extends (%Persistent, HS.SDA3.Patient) {}

The HS.SDA3.Patient class has the Aliases property which is a nested collection (list) of objects of type HS.SDA3.Name:

In the past, I've created custom SQL operations, but now I had something trivial to do, so I decided to take EnsLib.SQL.Operation.GenericOperation out for a spin. There's no example in the docs, so it was a little tricky. Here's what I ended up doing:

In my external database, I have 'mytable' with two fields 'id1' and 'id2'. Here are the pertinent Business Operation settings:

SQL: select id2 from mytable where id1 = ?
Input Parameters: [1] *id1
RequestClass: Ens.StringRequest
ResponseClass: MyResponseClass

Hi all,

We have an restriction in a SQL database with a unique index.

We want to catch that exception when it tries to insert or update a value that violates the unique index condition.

// run the querySet tSC = ..Adapter.ExecuteUpdateParmArray(.nrows,SQL,.param)

// Check if there is any errorIf$$$ISERR(tSC)
{
	Set msgError = $System.Status.GetErrorText(tSC) 
	// Check here if the native error code is 2601 (Cannot insert duplicate key row into object 'MYPATIENTS' with unique index 'UQ_UNIQUE_INDEX')
	??????
}

I've tried to get the ..Adapter.%SQLCODE, but it is empty

I am experiencing an issue while executing a stored procedure in InterSystems Cache. Here’s the procedure I createdCREATE PROCEDURE Silk.sp_InsertRecord (    IN RecordDate TIMESTAMP,    IN UserName VARCHAR(50),    IN RecordType INT,    IN RecordID VARCHAR(50),    IN CategoryID INT,    IN ApprovalDate TIMESTAMP,    IN FileSize BIGINT,    IN WorkstationName VARCHAR(50))BEGIN     INSERT INTO DummyRecords (        RecordKey,         FilePath,         RecordDate,         UserName,         RecordType,         RecordID,         CategoryID,         FileSize    )     VALUES (       

In ObjectScript you have a wide collection of functions that return some value
typically:

set variable = $somefunction(param1,param2, ...)

There is nothing special about that.
But there is a set of functions that I classify as LEFT SIDED 
The specialty of them is that you can use them also on the left of the equal operator 
as a target in the SET command:

set $somefunction(param1,param2, ...) = value

The reason to raise that subject is that with IRIS 2024.1 there is after may years  a "new kid on this block"

$VECTOR()

Hello all,

I need help with coming up with a SQL query that pulls only one value. I have a case where two providers share the exact same name. Each has a different NPI number and IdentityTypeId. I tried the below query - output is also below. 

SELECT *                        
FROM PhysTable                        
WHERE ProviderName = 'DOE, JOE' AND Type = 'NPI'                        
                        
UNION                        
                        
SELECT *                        
FROM PhysTable                        
WHERE IdentityId = '345678'                        
 

Output

Hi Community,

🔐 Make sure your data is secure! Learn some strategies for enhancing security in InterSystems IRIS® data platform:

Navigating SQL Privileges and Security in InterSystems IRIS

I have been trying to track down an issue we are seeing in our TEST environment with Memory usage.

We have Several BP's for years now that take a HL7 message, parse it apart, and make calls to a Custom EnsLib.SQL.OutboundAdapter to have it execute Insert/Select/Update/Delete stored procedures against a MS SQL Database via JDBC connection. We are using Microsoft's JDBC 12.2 driver to do this.

What we are seeing is that IRIS.WorkQueue globals are being defined for these calls but then the IRIS.WorkQueue is not being cleaned up and taking up large amounts of Memory.

Hi Community,
In this article, I will introduce my application iris-DataViz
iris-DataViz is an Exploratory Data Analysis and Visualization Streamlit Application that leverages the functionality of IRIS embedded python and SQLAlchemy to interact with IRIS, as well as the PyGWalker python library for data analysis and data Visualization. PyGWalker (Python Graphic Walker) is an interactive data visualization library built for Python, aiming to bring the ease and functionality of Tableau-style drag-and-drop visualization into Python environments.

Application Features 

In this article, we’ll dive into the inner workings of the database management tool, exploring the architecture and technologies that power it. Understanding how the application functions behind the scenes will give you insight into its design, how it manages databases, tables, and how the API interacts with data.

We will discuss the core technologies used, including InterSystems IRIS as the primary database and Redis for caching. Additionally, we’ll break down the structure of the tables used and explain how the system handles data creation, retrieval, and manipulation through the REST API.

Hi, Community!

Want to improve accuracy and data integrity in your relational databases? Learn a key strategy in this video:

Setting Up SQL Foreign Key Constraints

Problems with Strings

I am accessing IRIS databases with JDBC (or ODBC) using Python. I want to fetch the data into a pandas dataframe to manipulate the data and create charts from it. I ran into a problem with string handling while using JDBC. This post is to help if anyone else has the same issues. Or, if there is an easier way to solve this, let me know in the comments!

I am using OSX, so I am unsure how unique my problem is. I am using Jupyter Notebooks, although the code would generally be the same if you used any other Python program or framework.

The JDBC problem

Hello, I need to use IRIS to connect to an MSSQL base.
It has to be done via ODBC, I can't use JDBC at this time by client option.

I am trying to use Microsoft Driver
libmsodbcsql-13.1.so.9.2

But I can't, my attempts result in:
Connection failed.
SQLState: () NativeError: [11001] Message:

I have done all DSN configuration, and my configuration is listed in SQL Gateway Connections. I know it's working, because when I run a test with isql I have the information that connects to the bank.

This is my IRIS and Server configuration:
IRIS for UNIX (Ubuntu Server LTS for x86-64) 2018.1.1 (Build 643U)

How to add the following to a stored procedure (Cache Studio)
1. Select from a few tables and insert result into a TABLEA.
2. Then select data from the TABLEA, apply some SQL logic, insert results into TABLEB.
3. SELECT * FROM TableA
    UNION ALL
    SELECT * FROM TableB

Hello Community,

The Certification Team of InterSystems Learning Services is excited to announce the release of our new InterSystems IRIS SQL Specialist exam. It is now available for purchase and scheduling in InterSystems exam catalog. Potential candidates can review the exam topics and the practice questions to help orient them to exam question approaches and content. Candidates who successfully pass the exam will receive a digital certification badge that can be shared on social media accounts like LinkedIn.  

InterSystems FAQ rubric

In SQL, NULL data and the empty string ('') are different data. The method for setting and checking each is as follows.

(1) NULL data

[SQL] 

insertintotest(a) values(NULL)
select * fromtestwhere a ISNULL

[InterSystems ObjectScript]

setx=##class(User.test).%New()
setx.a=""

(2) Empty string ('')

[SQL]

insertintotest(a) values('')
select * fromtestwhere a = ''

[InterSystems ObjectScript]

setx=##class(User.test).%New()
setx.a=$C(0)

For more information, please refer to the following documents:

NULL and empty strings [IRIS]
NULL and empty strings

Hi community members!

I'm testing some functionalities about Foreign Tables and it works smoothly with PostgreSQL database, but I found out an issue with MySQL database, I followed the documentation:

• Step 1: I've created my SQL Gateway connection to my MySQL database: **WARNING** if the name of the driver file is too long IRIS won't be able to get it.

Hello all,

On one of my team's systems, we utilize a business operation with the EnsLib.SQL.OutboundAdapter to make SQL queries to another IRIS system using JDBC. To authenticate the connection, we utilize a user account on the target system.