I'm sure I've seen this issue reported before, but a search hasn't turned it up.

This appears to happen randomly, but once it starts it doesn't seem to stop ... at least for a while. I attempt to compile a class and compilation fails but produces no error explaining why. Here's an example:

The last two compilation errors repeat indefinitely (or at least until I've found and fixed the issue), but I can open the class in Studio, compile, and get the error information in the output panel every time. The compilation qualifiers are the same in both.

Hy Friends,

I have a little problem, I need to diplay the data based on input status (first time and after)

this is the data:

and this what I need to display

the notes become new because it is the first time that the data has been inputed, and it will become old if we have the data before (2nd data, 3rd data  the notes will become old).

I've try to use SubQuery (with LAG Script also) but it doesn't works, because it will give a notes Old even it's a New Data

Does anyone could help me ?

Thank You

Best Regards,

Steven Henry

I downloaded IAM-3.4.2.0-5604.tar.gz from the Online Distribution site this morning, it the implementation to install it on our Development environment to see if it is a viable solution. Following the instructions, I have ran into an issue trying to make sure I am entering the information into the prompts correctly.

I have IRIS HealthShare Health Connect 2024.1 running locally using a Local Web Server, so when prompted I have entered the IP Address and port 443 is that correct? 

:>iam-setup.sh
Welcome to the InterSystems IRIS and InterSystems API Manager (IAM) setup script.
This script sets th

Hello
I am trying to work with UDP Connection/Adapter and I get this error.

 Here is the method
 

If you're running IRIS in a mirrored configuration for HA in GCP, the question of providing a Mirror VIP (Virtual IP) becomes relevant. Virtual IP offers a way for downstream systems to interact with IRIS using one IP address. Even when a failover happens, downstream systems can reconnect to the same IP address and continue working.

The main issue, when deploying to GCP, is that an IRIS VIP has a requirement of IRIS being essentially a network admin, per the docs.

To get HA, IRIS mirror members must be deployed to different availability zones in one subnet (which is possible in GCP as subnets always span the entire region). One of the solutions might be load balancers, but they, of course, cost extra, and you need to administrate them.

In this article, I would like to provide a way to configure a Mirror VIP without using Load Balancers suggested in most other GCP reference architectures.

References:

• https://docs.intersystems.com/iris20243/csp/docbook/DocBook.UI.Page.cls…
• https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…
• https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

ObjectScript always follows strict left-to-right execution of arithmetic operators. 

The && operator evaluates the left operand and returns a value of FALSE (0) if it evaluates to a value of zero. Only if the left operand is nonzero does the && operator then evalu

I tried executing the SQL JSON_TABLE query with large JSON string(more than 200000 characters) and I got the below error. I'm curious about this under the hood workflow and how does it reach reaches MAXSTRING.

 Thanks!

Hi Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ Leveraging Automation Tools for Deploying InterSystems IRIS Applications @ Global Summit 2024

I'm glad to announce the new version of IoP, which by the way is not just a command line. I'm saying because the new AI search engine still thinks that IoP is just a command line. But it's not. It's a whole framework for building applications on top of the interoperability framework of IRIS with a python first approach.

The new version of IoP: 3.2.0 has a lot of new features, but the most important one is the support of DTL . 🥳

For both IoP messages and jsonschema. 🎉

DTL Support

Starting with version 3.2.0, IoP supports DTL transformations.

DTL the Data Transformation Layer in IRIS Interoperability.

DTL transformations are used to transform data from one format to another with a graphical editor. It supports also jsonschema structures.

The Lo-Code Challenge

Imagine the scene.  You are working happily at Widgets Direct, the internet's premier retailer of Widgets and Widget Accessories.   Your boss has some devastating news, some customers might not be fully happy with their widgets, and we need a helpdesk application to track these complaints.   To makes things interesting, he wants this with a very small code footprint and challenges you to deliver an application in less than 150 lines of code using InterSystems IRIS.  Is this even possible?

Disclaimer: this article documents the building of a very basic application and om

Another VSCode "Tips & Tricks" entry -

Do you want to see this option in VSCode?

I need to see the full SMTP trace when a %Net.SMTP attempts to send an email to troubleshoot an issue. As far as I know, the only way to get that is to uncomment line 192 in the %Net.SMTP class.

//:#define SMTPTRACE

I've done this in the past by giving myself the %DB_IRISSYS role, so I tried that. That database is also not mounted as read-only.

Of course the bigger issue here is that I can't seem to get that trace without having to edit a system class or create my own, but to fix my more immediate issue, what else do I need to check that would be preventing me from editing that class?

Hi Community,

I have a CSP page I am developing with the intent of pulling files from an SFTP site and placing them in a folder on the local network.

I am having an issue where the CSP page is catching a JS error. The error in the browser is - A JavaScript exception was caught during execution of HyperEvent: SyntaxError: Unexpected identifier 'downloading'. (However, the unexpected identifier changes after refreshing page, or after removing the Write statement with the work 'downloading' in it.)

I think I have narrowed it down to a piece of the Javascript code - 

#server(..DownloadFiles(d

Hello everyone, 

My team is currently developing guidance and best practices for the generation, storage, and deployment of TUNE TABLE statistics across development and production environments. With that in mind, we want to get an idea of what methods teams in the field have developed for handling this data. In particular, we’d like to know the following: 

1. How often do you use TUNE TABLE in your development vs. production environments? 
2. Do you utilize the $SYSTEM.SQL.Stats.Table package to generate and export TUNE TABLE statistics as files? If so: 
   1. Do you store these in source contro

Hello Community,

Is there any built in methods available to generate the both HTTP message format(request/response) from %Net.HttpRequest and it's response. 

Thanks!

There are three things most important to any SQL performance conversation:  Indices, TuneTable, and Show Plan.  The attached PDFs includes historical presentations on these topics that cover the basics of these 3 things in one place.  Our documentation provides more detail on these and other SQL Performance topics in the links below.  The eLearning options reinforces several of these topics.  In addition, there are several Developer Community articles which touch on SQL performance, and those relevant links are also listed.

There is a fair amount of repetition in the information listed below.  The most important aspects of SQL performance to consider are:

1. The types of indices available
2. Using one index type over another
3. The information TuneTable gathers for a table and what it means to the Optimizer
4. How to read a Show Plan to better understand if a query is good or bad

Hi.

How can I prevent the error:

2024-12-27 08:05:46 [SQLCODE: <-400>:<Fatal error occurred>] [Error: <<READ>XDCall+9^%SYS.DBSRV>] [Location: <$system.IO server loop>] [Client info: <Username: Operator, Node Name: PM_MIP_SRD01, IP Address: 10.40.1.108, Executable Name: Operative.dll, Internal Function: KÂ>] [%protocol: <65>] $Id: //iris/2023.2.0/kernel/common/src/sysio.c#2 $ 3514 121

It seems that this error occours when connection on PDA is lost and established again.

Tnx.

Regards,
Matjaž

I've just stumbled across this post. I am an aspiring developer and one of my first few projects is a HL7 v2 message generator. It takes in a message template and then you can edit and create bulk messages from it. 

Simply choose which segment to edit, specify the field position and then you can add a CSV of values. test, test2 and so on. You can choose to download the messages or display them in your browser. It also provides a JSON file showing you which new values are grouped. Not sure of all the use cases but I built it for a bit of fun over a weekend! 

Unfortunately it doesn't have the

Hi everyone,

I'm trying to connect my Laravel application with the InterSystems IRIS Data Platform using ODBC.I need help setting up the ODBC connection and querying the database properly. What is the proper way to configure Laravel to work with an ODBC connection to InterSystems IRIS?

Any help would be greatly appreciated!

Thanks in advance!

Hello my Friends,

I have a question, I have a data like this

And I want to create a display like this, which I can put a status column beside the Item Column

The status become new, if there's no previous item, and if there's a same item after the first one, the status become Old

Does anyone could help me ?

I need to display it without subquery if possible

Thank You

Best Regards,

Steven Henry

I have a query that returns around 6000 records that I need to go through and update another MS SQL Table. I would like to execute this once a day. How do you set MaxRowsToGet on a EnsLib.SQL.InboundAdapter service?

Thanks

Scott

Hello,

I was just trying to get to the bottom of a TLS config - we have an interface with a TLS config that has had 'Server certificate verification' set to 'On', however the cert file specified either did not exist or contained a cert that was expired.

Does anyone know what the behavior is for this typically? I would expect this to not allow traffic on the interface, however this has been working fine for a few years now with an invalid cert specified for 'Server certificate verification' and set to 'On'.

Hi everyone,

I’m currently experimenting with the SQL Gateway Connection, CREATE FOREIGN SERVER, and the THROUGH command (IRIS Documentation). To speed up my tests, I’ve combined several DemoDataSets in a Docker container and would like to automate the creation of SQL Gateway Connections using code. 

(By the way, if you’re interested, the Docker container is available here: Demo DBs IRIS.)

To achieve this, I’m using SQL to create a connection by running a command like INSERT INTO %Library.sys_SQLConnection. While this successfully displays the connection in the Management Portal, it cannot

Earlier this year I announced availability of a VS Code extension for coding in ObjectScript, Embedded Python or SQL using the notebook paradigm popularized by Jupyter. Today I published a maintenance release to correct a "getting started" problem.

Here's a video of the installation steps from the extension's README:

(video superseded by an update in a later comment)

Why not try it for yourself?

When developing a new Interoperability Production, it is quite natural that settings are initially added in the Production.

However, as soon as you want to move the Production from development to a test or staging environment, it becomes clear that some settings like HTTP Servers, IP addresses and/or ports need to be changed. In order to avoid these settings being overwritten during a redeployment later on, it is essential that you move these settings from the Production to the System Default settings.

Creating System Default settings manually is possible, but will become hard when you have lo

Dear community, my company use intersystems iris, a old version of 2019 and centos 7.9

At the moment, we are faced with a rather strange luck of iris.

Every day during working hours, we receive a error that iris primary cannot transfer the journal to the backup node.

We have availability monitoring, these errors do not affect availability in any way, but I still wanted to analyze this error.

I understand that the severity of this error is only 1, but Can someone share a diagnostic method this error?

12/12/24-15:48:43:705 (20263) 1 MirrorServer: Unlinking with journal daemon at 0x09db5294,

The best way to list, edit, save and delete globals is using an IDE. Now, it is possible if you use VSCode. It is also possible to save globals using yaml files. Perform the following steps:

1. Get an InterSystems IRIS instance and install the application iris-global-yaml: 

zpm:USER>install iris-global-yaml

2. If you just to want an InterSystems IRIS trial for tests git clone and run on docker:

git clone https://github.com/yurimarx/iris-global-yaml.git
docker-compose up -d --build

3. Go to https://openexchange.intersystems.com/package/IRIS-Global-VSCode-Editor, click GitHub button, look

Last Chapter: Creating a REST client to get Tracks from Spotify REST API - Part4 Save the Search Result

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

OK.... based on what I have done.... I am able to 

1. Query Track information by making use of the Spotify API

2. Store the necessary data into my own album, artists, and track table

so.... what next?🤔 How about I set up my own REST API service on my IRIS for the other people to query my table?🤔🤨

ok... 1st... start from document Introduction to Creating REST Services

so we have 2 ways to implement a

You'll find the original text and all my Advent of Code efforts in different programming languages in https://bitbucket.org/janihur/advent-of-code/src/master/

ObjectScript code discussed here is found in https://bitbucket.org/janihur/advent-of-code/src/master/objectscript

I have been using ObjectScript only on last 1,5 years maybe 30% of my working time but the code at work is very different than in these puzzles. You can find my random code snippets and learning notes from https://github.com/janihur/objectscript-ex

This is the first time using ObjectScript during the contest. Earlier this

We have released IPM 0.9.0. I previously remarked on some of the history and reasoning here; to summarize, this is a big release for two reasons: it represents a long-overdue reunification of our internal and community-driven work around IRIS-centric ObjectScript package management, and it has some backwards incompatibilities. There are several necessary backwards incompatibilities in our roadmap, and we've lumped them together; this will not be some new norm.

Under the hood, the class naming and package structure has completely changed. If you're making direct use of calls to (most likely) %