We are interfacing through Ensemble with an application that does not like diacritic signs in text. I have been searching for a way to strip these signs from the HL7 messages that get send to that application.
The problem in short is we have an incoming HL7 message with e.g. é (or ë, á etc), this goes into Ensemble. In the outgoing message the é should be replaced with an e.

2 1
0 483

Hi Community!

Join us at the FHIR event of the year in the US: the HL7 FHIR Dev Days 2018!
A unique chance to meet 400 colleagues and discuss all topics relating to your field.

InterSystems is proud to be the Host Sponsor of HL7 FHIR Dev Days for its first U.S. edition, Boston, June 19 – 21st! We support the HL7 FHIR standard as it is critical for rapid innovation. FHIR can be used as an accelerant to bring all the information that matters for a patent into a unified health record.

0 0
0 481

Presenter: Matt Spielman
Task: Use the FHIR standard with HealthShare-based solutions
Approach: Provide an overview of how HealthShare will support the evolving FHIR

The next major release of HealthShare will be the first version to support the emerging HL7 FHIR standard. This presentation will discuss InterSystems’ involvement with the FHIR standard, detail the new FHIR functionality, and review our long term plans for FHIR in the HealthShare platform.

Content related to this session, including slides, video and additional learning content can be found here. Please note that this content is available only to HealthShare customers and attendees of the Global Summit. On the learning web site you will be prompted for your Global Summit credentials to access this content.

0 0
0 479

Does Intersystems Ensemble support (for LGBTQ+) gender code "U" in Healtshare? Specifically for the clinical (or physician) viewer?

Test shows the gender code is consumed without error and stored, but the viewer does not present it except (as far as I can see) in the patient search drop-down.

The 2.3.1 HL7 ADT schema code table lists "U" as a supported option.

Would this require customization in the viewer code to support this?

0 3
0 478

I need to remove content below, from PID-3/HL7 message, in IRIS. However, I need to keep the content in PID-3.1. For example, I’d need to keep only, “5050532”. Can this be done in Data Transformations? If yes, how?
Thank you!

MSH|^~\&|TEMPUS|TEMPUS LABS|EPICEMR|YRMC|20210930100824||ORU^R01|4823623379495310173|T|2.3|
PID|1||5050532^^^YRMC~09abefb8-872b-4147-8e4b-77463bb235cb^^^^TEMPUS||

0 4
0 470

I am working on tweaking our current patient load process. The roster input is in text pipe delimited format, parsed out and transforms it to a standard HS.Message.PatientSearchRequest, and send to business process for patient matching. Result is transformed into a standard ADT HL7 message using EnsLib.HL.Message class. I would like to know if there is another class I can use that will transform my output to a text flat file pipe delimited instead of HL7 format? any advice on how to do this is greatly appreciated.

Thanks!

0 2
0 469

Hi Community!

I'm sharing a little tool (REST service) to download interoperability messages from your browser.

You only need to:
1. Create a web application in Management Portal (e.g. /downloadmsg) and set DispatchClass=Util.DownloadMsg.
2. Call the tool using your browser passing the namespace and the message header id to download.
http://localhost:52773/downloadmsg/ns/mydev/msgid/17441

0 0
0 468

I'm doing some Schema changes. I used our existing standard schema as a base, which was already based on 2.3. So let's call our existing one Custom.MHC.Schema (based on 2.3). I created Custom.MHC.Schema.Advanced (based on Custom.MHC.Schema) and copied down one of the code tables then made a change to it.

When I ran a message through, the code table change didn't show up. I noticed in the message viewer that the DocType is still Custom.MHC.Schema:ADT_A01 but the DocType Category is Custom.MHC.Schema.Advanced.

0 1
0 467

I have been struggling trying to understand "Response From" and "Response Target Config Names" as I am trying to track down Orphaned messages. I have noticed that when a Business Rule, or Business Process sends to a File Based Operation, there is always a NULL value response being returned. I am thinking these NULL values are causing some of the orphaned message problems we are seeing.

0 2
0 462
Question
· Sep 21, 2020
suppressing a patient identifier

Hi all

Another newbie question.

A small percentage of our patients have an extra hospital number which was imported from the previous PAS but is no longer in use. We only need to send MRN and NHS number and would like to suppress CMRN. Could you please advise me how to do it in DTL?

0 5
0 458

At LifeLabs, we are focused on our vision of building a healthier Canada! We are the largest community diagnostics laboratory in Canada with over 350 collection centers, 21 laboratories and service over 19 million patients each year. As the Software developer, you will be concerned with all facets of the software development process. You will be responsible for the design of application modules, maintain and deploy software applications to meet user and business needs.

0 0
0 457

I'm testing an HL7 2.4 -> HL7 2.3.1 set of transformations. For the time being the source (service) and sink (operation) are file adapters. What I'd really like is to be able to save the output file with a name matching/containing the input file name - but as the DTL transformation in between uses "new" rather than "copy" it looks like I'm losing (some of?) the metadata, including the "Source" field (Body tab, message viewer).

Is there any way of preserving the Source field so the OutboundAdapter has access to it?

0 3
0 456

Hi Community!

Please welcome the next video from Global Summit 2019 on InterSystems Developers YouTube:

Implementing FHIR Use Cases

https://www.youtube.com/embed/NKW4p3EqiYA
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 454

Hi Community,

In this video, you will learn about exciting new ways to perform analytics using data in your HL7® FHIR® repository:

InterSystems IRIS FHIR SQL Builder: Sneak Peek @ Global Summit 2022

https://www.youtube.com/embed/lCv5t4785JY
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

2 0
0 452

I have attached a document that describes the product I have developed called NiPaRobotica Pharmacy. This is an interface I developed that accepts Pharmacy Dispense Requests and converts the line items on the order into dispense dialogues which it sends to pharmacy robots. I deployed the interface into 3 Hospital pharmacies two of which had 6 robots that were arranged in such a way that the dispense chutes channelled medications to desks by the pharmacists sitting in windows serving 1200 patients a day. The robots cut the average waiting time from 2 hours down to one hour.

17 2
1 452
Question
· Apr 12, 2017
Message Profiling

Hi all,

I was wondering if InterSystems offers any message profiling capabilities. What I mean by "message profiling" is essentially stats or metrics gathered from a collection of data submissions of a particular type. For instance, average number of segments <XYZ> in a specific HL7 V2 message type. Or the number of sections found in a HL7 V3 CDA documents.

Curious if there is anything like this provided "out-of-box".

Thanks!

James

0 4
0 447
Question
· Sep 7, 2018
Remove FHS segment from file

Is there any out of the box capability in Ensmeble to remove an FHS segment from a batch file? We have a client that is creating a batch of HL7 messages and they insert an FHS but there is no trailing FTS.

We are hoping to avoid custom COS code to handle this scenario.

0 2
1 446

Hello,

I have a problem attempting to store a base 64 encode stream into the OBX:5 field of a HL7 message, by using the StoreFieldStreamBase64 method.

I'm using a transformer to input the contents of a pdf within a stream container (Ens.StreamContainer). The output is a HL7 message (EnsLib.HL7.Message 2.5:ORU_R01).

The transformer is being used in a business process.

This is the code used in the transformer to encode the stream to base 64:

0 2
0 442

- Currently we are receiving one NTE (See Below) from the source system

NTE|1|Result Comment|TESTING:\.br\\.br\This is a test results. \.br\\.br\This test is a Test.

- We would like to create multiple NTE segments and send to destination system by using ".\br\"(Line Break)

NTE|1||TESTING:

NTE|2||

NTE|3||This is a test results.

NTE|4||

NTE|5||This test is a Test.

0 1
0 437

Hi Community,

Please welcome the new video on InterSystems Developers YouTube:

Build HL7 Interfaces in a Flash

https://www.youtube.com/embed/kwWioDry9YQ
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 434
Question
· Aug 9, 2016
Storage Management

We want to isolate the storage of our CCDAs from our HL7 V2 data, but keep them under the same namespace. From my understanding, I should create a new database then store those classes related to CCDAs in that database. Is this the correct approach?

0 1
0 433

Hi Community,

Watch this video to learn about InterSystems FHIR Server, the turnkey FHIR data solution that empowers FHIR application developers to focus on building life-changing healthcare applications:

⏯️ What is InterSystems FHIR Server

https://www.youtube.com/embed/O3Er84CGcoc
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 427
Question
· Aug 19, 2019
Filter by time in Routing Rule

I have a colleague that is trying to eliminate any HL7 transactions that have admit date/time of midnight from going to an downstream system within a routing rule. I have tried several different iterations of code trying to figure this out just in the routing editor. Without having to write an object script function is this possible?

0 4
0 425