HL7

Syndicate content 19 

Way back when during our Siemens LCR days we had to limit the number of characters in OBX.5 to a length of 75. That was back when we had eGate.

Now I need to do the reversal of that and take loop through a string length and split the string up into multiple OBX or NTE based on a certain length. In reading documentation $EXTRACT can do this if you know the exact length, but in this case we don't. 

So how would one loop through a string and say every 75 characters create a new OBX or NTE segment?

Thanks

Scott

Last answer 6 days ago Last comment 6 days ago
0   0 4
143

views

0

rating

Hi there.

I am dealing with a clinical system that returns a stack trace within the NACK (Specifically, within MSA:3).

Within the stack trace there is an error code I am interested in, and hoped I could use the Reply Code Actions to look for that code within the error by using the "E*<text>" condition to either suspend or accept the response and move on. The problem is, looking at the error within the event log, I can see that the error text is truncated, cutting off the error code I'm looking for within the stack trace.

Last answer 18 June 2019 Last comment 19 June 2019
0   0 2
66

views

0

rating

Hi,

I would like to use EnsLib.HL7.Operation.HTTPOperation for sending HL7 messages via HTTP. It sends the Content-Type as "text/html"

I would like to change it to something else, say "text/plain". I cannot see a way to do it.

I have now written a custom Operation (based on EnsLib.HTTP.OutboundAdapter) and modifying the Content-Type while POSTing using SendFormDataArray(). It's bit frustrating to parse the response etc.,

I would rather prefer to use HTTPOperation of HL7. Can somebody help?

Last answer 4 June 2019
0   0 2
0

comments

68

views

0

rating

Hello,

currently we have a problem in development with the character set of the response message.

We are transmitting an HL7 message with an operation based on the EnsLib.HL7.Operation.HTTPOperation class.
We have changed this as follows.

Set pMsgIn=$$$NULLOREF, tHttpRequest=##class(%Net.HttpRequest).%New(), tHttpRequest.WriteRawMode=1, tHttpRequest.ContentType="APPLICATION/HL7-V2; charset=UTF-8"

Unfortunately, the ContentType character set is not read correctly in the response.

 

Last comment 23 May 2019
0   0 3
0

answers

95

views

0

rating

Hi, 

It is sometimes undesirable to send a full demographic or results feed to departmental clinical systems, that only see a subset of the patients.

While some systems (paediatrics, maternity, geriatrics) can filter on patient demographics, a number of systems are for cohorts of patients that don't fit a particular criteria.

One of our system vendors has a patient index filter service that keeps a local index of relevant patient identifiers, and only forwards matching messages.

Last comment 3 May 2019
0   0 4
0

answers

86

views

0

rating

So I have an interesting problem. I am going to be using a process and rule to determine if an HL7 message qualifies to be sent out, then using a record map to write certain aspects of that HL7 message to disk (with an HL7 to record map DTL). This is simple enough but the recipient of this file is requiring a single record map entry per DG1 segment in the HL7 message.

 

For instance if said HL7 message for PATIENT^TEST  has 3 DG1 segments, I would need to write three lines (or records) like so:

123^^^^MR|TEST|PATIENT|DG1(1) TEXT|DG1(1) CODE|DG1(1) DATE

Last answer 11 March 2019 Last comment 12 March 2019
0   1 2
134

views

0

rating

Hello Gentlemen,

 

My Business process connector receive a Oru_01 hl7 message with an ED segment inside (Base64 pdf). How is it possible to extract it and create a pdf file within?

Here is the sample of function I have. I know it doesn't work but if you could help me, it would be perfect. Here is my function, the goal would be it create the file where I want and return me the link of the file.

Last answer 7 March 2019 Last comment 7 March 2019
0   0 3
181

views

0

rating

Hello Gentlemen,

 

As you can read on the title, my question is to know how to retranslate the hl7 message into a string and so to remove the '\E' that are inside. A example/picture worth more than a thousand word.

OBX|1|RP|ECG||CARDIO ECG^APPLICATION^PDF^^\E\\E\sitehopital.org\E\files\E\cardio\E\022018\E\GE274583.PDF|

 

Last answer 25 February 2019 Last comment 25 February 2019
0   0 2
128

views

0

rating

I am trying to get the values of a PID:3 segment to an  array but I will need to know the length of the segment to process .

set o = ##class(EnsLib.HL7.Message).%OpenId(458)

w o.GetValueAt("PID:3")

w o.GetValueAt("PID:3").SegCount  This throws an error any help appreciated

Last answer 8 February 2019 Last comment 8 February 2019
0   0 4
170

views

0

rating

Does Intersystems Ensemble support (for LGBTQ+) gender code "U" in Healtshare? Specifically for the clinical (or physician) viewer?

Test shows the gender code is consumed without error and stored, but the viewer does not present it except (as far as I can see) in the patient search drop-down.

The 2.3.1 HL7 ADT schema code table lists "U" as a supported option.

Would this require customization in the viewer code to support this?

Last answer 6 February 2019 Last comment 6 February 2019
0   0 3
116

views

0

rating

I'm looking for options to create multiple DFT HL7 messages based on data contained in a ZCO segment in a single inbound DFT message.  I have the following ZCO segment:

ZCO|CCC^Charge Code|1306794,1071301,23510,1071424|MFCD^Charge Code|14232,3542|||||

In this example, I need to create a new DFT message based on the data contained in ZCO:2.  Each code needs to be in it's own DFT message and put in FT1:7.1.  The number of codes will vary for each inbound message, but each code will need to create its own outbound message to the client.
 

Last answer 5 February 2019 Last comment 6 February 2019
0   0 3
119

views

0

rating

Hi.

We have created an Ensemble production that receives HL7 information via TCP Adapters, but the requirement from the vendor is that we submit an ACK message with the MSH segment mist have a date and time populated with seconds.

We are utilising the standard class for the Service Adapter (EnsLib.HL7.Service.TCPService).

HL7 Version 2.5 no modifications currently.

The messages received via the service is correctly received in ddMMyyyyhhmmss but our ACK back is only ddMMyyyyhhmm.

Last answer 22 January 2019
0   0 4
0

comments

171

views

0

rating

Is there any good documentation/tutorials on creating gateways in both directions between FHIR and Hl7v2 (for Health Connect)?

the scenarios I'm most interested in

1. Client application sends a FHIR demographic query to Health Connect - and the interface has to convert this to Hl7v2 QBP^Q11 message to the PAS.

2. Health connect sends a PDF document (from a file or HL7v2 interface) to an EPR over FHIR.

Thanks

Stephen

UPDATE

Last answer 3 January 2019 Last comment 7 January 2019
0   1 3
305

views

0

rating

I want to test automatically that HL7 business operation works correctly in error conditions. One is to test CE acknowledgement. I have planned to implement test production which includes business services for different situations (AA, AE, CA, CE, timeout, late response etc).

How should I implement HL7 business service that always returns CE (commit error)? I have tried but it keeps returning "AA".

Last answer 19 December 2018
+ 1   0 3
0

comments

116

views

+ 1

rating

Hello.

I have a delimited flat file that I need to read and then generate an HL7 A08 message from the fields in the file.  I used the Management Portal's Record Mapper to generate the Map.Record class, then used drag & drop to map fields in the delimited flat-file to an A08 message.

But when I try testing this in the test tool, I'm getting an ERROR #6254: Tag expected . XML input. ... is not in proper format as child of Record (ending at line 2 character 11).

Last answer 14 December 2018 Last comment 14 December 2018
0   0 2
116

views

0

rating

HealShare 2017

Hi dev community,

I am currently  working on an interface that needs to communicate to a SOAP/ITK endpoint.

I am using the EnsLib.ITK.AdapterKit.Operation.SOAPOperation to interface with an ITK 
service, but it is proving to be more complex than originally expected to set up the web client 
against that particular end-point since I haven't been provided with a WSDL from ITK service side as 
the vendor state they are following the ITK standard and no WSDLs are needed.

0   0 1
0

comments

94

views

0

rating

I'm currently working on a project to run our medical device integration through ensemble.

I've noticed a potential problem with the volume of messages .  The feed generates around 474K messages daily( average of 1 message per minute per device from 300+ devices).

We currently keep all our other feeds message data for 90 days and purge automatically.   From what I can see is that the purge functions in Ensemble are production wide and cannot set it at the Business Operation, Service or Router level.

Last answer 26 October 2018
0   0 2
0

comments

101

views

0

rating