HL7

Syndicate content 21 

Good morning -

I am attempting to pass some HL7 content (say, a complete ADT message) from one server to another via REST/JSON - for reasons. 

I can get the data across but when I try to create an EnsLib.HL7.Message object from the message in the JSON body, I end up with just the start of an HL7 msg in the resulting object. Looks like: MSH|^~\&

The start of the code accepting the data looks like this:

Last answer 30 September 2019 Last comment 30 September 2019
0   0 2
96

views

0

rating

I am putting together a new interface to take in a CSV file and output an HL7 message.

I have used the record mapper to create the source class and I am putting together the transform, but when trying to test it I am not seeing the data populate the HL7 as intended.

 

 

Last answer 23 August 2019 Last comment 23 August 2019
0   0 2
112

views

0

rating

I have a colleague that is trying to eliminate any HL7 transactions that have admit date/time of midnight from going to an downstream system within a routing rule. I have tried several different iterations of code trying to figure this out just in the routing editor. Without having to write an object script function is this possible?

Last answer 21 August 2019 Last comment 20 August 2019
0   0 2
129

views

0

rating

Hi,

I have a ORU message, which has a EVN segment that I want to remove and send the message across.

I tried to clone the request as below:

s newreq = request.constructClone

s changreq = newreq.RemoveSegmentAt("EVN")

Set request  = changereq

but it fails. Is there a way that I can safely remove a segment and pass it on?

Would appreciate your help in this

Regards,

Eric

Last answer 8 August 2019 Last comment 14 August 2019
0   0 2
228

views

0

rating

Way back when during our Siemens LCR days we had to limit the number of characters in OBX.5 to a length of 75. That was back when we had eGate.

Now I need to do the reversal of that and take loop through a string length and split the string up into multiple OBX or NTE based on a certain length. In reading documentation $EXTRACT can do this if you know the exact length, but in this case we don't. 

So how would one loop through a string and say every 75 characters create a new OBX or NTE segment?

Thanks

Scott

Last answer 10 July 2019 Last comment 9 July 2019
+ 1   0 5
377

views

+ 1

rating

Hi there.

I am dealing with a clinical system that returns a stack trace within the NACK (Specifically, within MSA:3).

Within the stack trace there is an error code I am interested in, and hoped I could use the Reply Code Actions to look for that code within the error by using the "E*<text>" condition to either suspend or accept the response and move on. The problem is, looking at the error within the event log, I can see that the error text is truncated, cutting off the error code I'm looking for within the stack trace.

Last answer 18 June 2019 Last comment 19 June 2019
0   0 2
91

views

0

rating

Hi.

We have created an Ensemble production that receives HL7 information via TCP Adapters, but the requirement from the vendor is that we submit an ACK message with the MSH segment mist have a date and time populated with seconds.

We are utilising the standard class for the Service Adapter (EnsLib.HL7.Service.TCPService).

HL7 Version 2.5 no modifications currently.

The messages received via the service is correctly received in ddMMyyyyhhmmss but our ACK back is only ddMMyyyyhhmm.

Last answer 22 January 2019
0   0 4
0

comments

279

views

0

rating

Hello.

I have a delimited flat file that I need to read and then generate an HL7 A08 message from the fields in the file.  I used the Management Portal's Record Mapper to generate the Map.Record class, then used drag & drop to map fields in the delimited flat-file to an A08 message.

But when I try testing this in the test tool, I'm getting an ERROR #6254: Tag expected . XML input. ... is not in proper format as child of Record (ending at line 2 character 11).

Last answer 14 December 2018 Last comment 14 December 2018
0   0 2
154

views

0

rating

HealShare 2017

Hi dev community,

I am currently  working on an interface that needs to communicate to a SOAP/ITK endpoint.

I am using the EnsLib.ITK.AdapterKit.Operation.SOAPOperation to interface with an ITK 
service, but it is proving to be more complex than originally expected to set up the web client 
against that particular end-point since I haven't been provided with a WSDL from ITK service side as 
the vendor state they are following the ITK standard and no WSDLs are needed.

0   0 1
0

comments

136

views

0

rating

We have the need to write a function that can loop through say a field in an OBX segment within HL7 and compare it to a string passed. Is it possible to have the user enter the Operator ( >,<,=,<>) as a variable inside Cache object script? Does anyone have any examples they can share?

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

Last answer 17 September 2018 Last comment 14 September 2018
0   0 5
225

views

0

rating

Hello,

I am trying to send a HL7 Billing Batch 2.3:FHS file out to an FTP site:

The file needs to be  in Variable Length / Carriage return carriage control format--  

 When I send the file, the format is Fixed Length 512 Byte Record-- Not Working

The data is ok within the file-- It is just the way I am sending it out of Ensemble that is not correct.

I am thinking that it is a setting within the Operation that I am missing or not choosing correctly.

Charset-AsciiCR

Separators -|^~\&\r

Last answer 13 September 2018 Last comment 13 September 2018
0   0 2
124

views

0

rating

I have a vendor that is sending me an Abbreviation in FT1:16.4.2 that I need to look up against a table to find the correct ID for.

FT1|1|||20180523161501|20180523161503|CG|1906551^Lipid Profile|||1||||||^^^ LAB&06CL|||Z00.00||00410^Knerr^Joel||721410||30100001^Lipid Profile|

But in my Business Process when I refer to request.GetValueAt("FT1:16.4.2") its not recognizing that this field contains information. Is my syntax wrong?

Last answer 29 May 2018 Last comment 29 May 2018
0   0 1
272

views

0

rating

Hi Community

I've just started developing for a new client and noticed that the View Raw Contents link isn't displayed when inspecting HL7 message contents in the Management Portal. Is the link missing due to:

1) a configuration setting?

2) a security setting?

3) a difference between installation on Unix Vs Windows?

And is there a way to turn it on?

I've trawled through the doco but haven't been able to find anything on this.

Thanks in advance for any help you can give

Duncan

Last answer 1 May 2018 Last comment 1 May 2018
0   0 2
139

views

0

rating

We have a case where a vendor can send us more information in the DICOM message rather than in the HL7 result message. In theory it should be possible to take a DICOM and convert it to HL7, stupid question is has anyone done it before? Does anyone have any good examples of a DTL they did to show me how to setup the message structures and translation?

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

Scott.Roth@osumc.edu

Last answer 14 March 2018 Last comment 14 March 2018
0   0 2
373

views

0

rating

As I was going though and trying to figure out why our CACHE.dat has increased in size over the past 18 days, I found that EnsLib_HL7.Message is still retaining messages dating back to 2014 even though we have our purge set to 10 days. Has anyone else experienced this?

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

Last answer 30 January 2018
0   0 2
0

comments

159

views

0

rating

I am trying to come up with a way to decode the Base64 we receive in an HL7 message into a PDF file and save it in a directory on our AIX machine. I thought I had the following working at one time but I am having issues. Has anyone done this before?

Last answer 19 November 2016 Last comment 25 January 2018
0   1 4
1551

views

0

rating

I have an interface that does not send me specific ID's, so I am scanning the AIL3.2 (Text) field for certain characters. The Routing rule is getting pretty big with all the OR statements. Is there a way that I can define what I am searching for in the data lookup table, and not have to scan the whole field that it does by default? Is there a way that I can simplify this?

Last answer 18 January 2018 Last comment 18 January 2018
0   0 2
324

views

0

rating