· Jan 20, 2017
MPI Question

Hello experts,

Good afternoon. I am a new member here and was wondering if any of you can help me with creating my own instance of Healthshare with MPI. This will serve as a sandbox and a learning environment for me. What is the minimum requirement to have such an environment setup, meaning will I only need to setup HSBUS, HSREGISTRY(HUB), MPI, HSACCESS, and EDGE Gateway(s)? If so, how do I properly set them up without just installing an environment with ENSDEMO?

0 3
0 458


I would like to create a new message of a particular type and append various segments programmatically. I have started with the following snippet. What I am currently finding difficult is to define a segment of a particular segment structure. I would like to append a pid segment of 2.3.1 to my message. I know I could you the importfromstring but I wanted to know whether there was a better way of achieving this.

0 2
0 458

In the table/class HS_Registry.document there is a column/property named RepositoryUniqueId. There are about 14 unique values, which pretty much lines up with the number of our "Push" (Provide & Register) participants and thus unique document repositories. However, these values just look like OIDs. I've been searching for over an hour and I can't find anywhere that will provide me some context to these "Repository IDs".

Anyone have ideas or suggestions where I could find this info?

0 3
0 455

Hi -

I was wondering how if the "old FHIR gateway" works with the latest release of HealthShare Information Exchange. Since there is an impact on the amount of storage needed to use the "FHIR Gateway 2 which uses the Operation Data Store (ODS)", my question is how (if at all) can FHIR access to Information Exchange work without ODS?


0 1
0 454

Hello all,

I have a problem where one of our 3rd party systems is only able to accept HL7 messages with UTF-8 encoding but the originating messages have Windows 1252 encoding. Does anyone know a way in which I can change the encoding for the entire message from Windows 1252 to UTF-8? I have only been able to find the CONVERT method to change individual charachters but we would like to change the entire HL7 message encoding.


1 1
0 453

Schematron is a rule-based validation language for making assertions about the presence or absence of certain patterns in XML documents. A schematron refers to a collection of one or more rules containing tests. Schematrons are written in a form of XML, making them relatively easy for everyone, even non-programmers, to inspect, understand, and write

1 0
0 450
· Apr 22, 2020
FTP adapter

Hi community,

I am now working with an ftp adapter. I have no problem connecting to the FTP server, but there are problems with interacting with files. Has anyone had any experience with an FTP adapter, such as getting/modifying/deleting files?

2 4
0 450

I have created a custom container that contains medication adherence data. I want to know the best-practice way of querying the data for to display in a custom Zen page in the Clinical Viewer for a given loaded patient.

Let's say the custom class is called Hospital.Data.MedicationAdherenceData. Let's say the streamlet class is Hospital.SDA3.Streamlet.MedicationAdherenceData

0 3
0 448

InterSystems announces another developer preview release, as part of the developer preview program for the 2022.3. Many updates and enhancements have been added in 2022.3 and there are also brand new capabilities, such as the new FHIR SQL Builder, improvements for Columnar Storage, and support to Oracle Linux 9. Some of these features or improvements may not be available in this current developer preview.

1 9
0 447

I need some help with unescaping a value in TXA 2 of an MDM message that I am writing to a variable, to be used in a filename for a PF. Would I use the method Unescape(pData) if so how can I use it in a transform to set the variable? The reason I need to do this is I need to use the name as file name when writing the PDF to a directory. The escape characters and invalid for file names .

0 5
0 444
· Oct 24, 2022 9m read
PerfTools IO Test Suite


This pair of tools (RanRead and RanWrite) is used to generate random read and write events within a database (or pair of databases) to test Input/Output operations per second (IOPS). They can be used either in conjunction or separately to test IO hardware capacity, validate target IOPS, and ensure acceptable disk response times are sustained. Results gathered from the IO tests will vary from configuration to configuration based on the IO sub-system. Before running these tests ensure corresponding operating system and storage level monitoring are configured to capture IO performance metrics for later analysis. The suggested method is by running the System Performance tool that comes bundled within IRIS. Please note that this is an update to a previous release, which can be found here.

5 1
0 441
· Nov 7, 2022
Stream Compression

Does anyone have insight into how the Stream Global Compression works in 2022? I'm particularly interested in the XDSb repository on the Edges. As I understand it anything new will be compressed. Is there a compression method that is used that can be utilized by other code? How are the retrievals aware that the contents are compressed in order to de-compress them?

0 8
0 441

Hi Community,

I'm looking for a new contract with immediate availability.

I have 20 years experience with InterSystems technologies in areas such as Healthcare integration and single page web development.

I can work almost anywhere in the UK as well as remote work from my office in Exeter.

If you know of any opportunities or could pass on my LinkedIn details to anyone that might be looking then it would be very much appreciated.

5 0
0 437

For a HL7 production, How will I be able to use two different segment level transformation (sub transform) in the main transform.

For Ex:
Few mappings from source PID --> target ZAX segment (subtransform 1)
Few mappings from source PV1 --> target ZAX segment (subtransfrom 2),

In the main mappings, I have used subtransform 1 followed by subtransform 2. It doesn't seem working fine.

Any suggestions please. Thanks:)

0 2
0 437
· Jul 18, 2018
Market penetration

My understanding is that IRIS is a new technology and does not replace Cache or Ensemble and to that end is more of a modernization than a repackaging. Is that accurate?

Is IRIS and HealthShare heavily penetrated in the payer space of primarily dominate in the provider space? What is the trajectory for InterSystems to penetrate the payer landscape?

2 1
0 435

Hello All,

I am receiving this error when attempting to place a file in a local SFTP server.

ERROR <Ens>ErrFTPPutFailed: FTP: Failed to Put file '101320210700.RAW' (msg='Error in SFTP Put('/healthshare/mgr/Temp/VPacx9a1eq0b5g.iostream','/SFTP/unmhsmcsa/OUT/101320210700.RAW') ERROR #7504: Timeout',code=0)

Any help is appreciated.

Below are my settings

0 4
0 432

Deploying InterSystems HealthShare code, supporting lookups and artifacts like ssl certs, keys etc is relatively straight forward using Gitlab Runners. Not only does this approach enable managing the code base and deploying with git type workflows, but it also lends to a speedy recovery and repeatable environments for some implementations.

3 1
1 429
· Sep 26, 2021
Modifying %Stream contents

I have a %Stream that I want to insert some text into the middle of. I create a new stream called pNewContentStream from the original stream, then I do a MoveTo in pNewContentStream to get to the byte position I want to insert into but when I do my Write, my pNewContentStream gets obliterated with only the text that I wrote, the original content goes away and all I'm left with is my Write text.

0 17
0 428

Presenter: Matt Spielman
Task: Use the FHIR standard with HealthShare-based solutions
Approach: Provide an overview of how HealthShare will support the evolving FHIR

The next major release of HealthShare will be the first version to support the emerging HL7 FHIR standard. This presentation will discuss InterSystems’ involvement with the FHIR standard, detail the new FHIR functionality, and review our long term plans for FHIR in the HealthShare platform.

Content related to this session, including slides, video and additional learning content can be found here. Please note that this content is available only to HealthShare customers and attendees of the Global Summit. On the learning web site you will be prompted for your Global Summit credentials to access this content.

0 0
0 428

The title of the contest subject is not quite precise but addresses the %Library.classes involved.
What is meant is officially named Class Query and is dating back to the early days of Caché.
CLASS is used because it is embedded in a COS class.
Though there is a precise description in the official documentation it remains rather abstract.
My tutorial should guide you step-by-step through a simple example in COS to make it tangible to you

8 4
1 427