Ensemble

Syndicate content 72 

Hi everyone,

I started working on Ensemble this year so maybe I am not implementing the right way. I'm trying to connect a Welch Allyn monitor to TrakCare. The workflow is the following:

- User scans patient number with the monitor.

- The monitor sends a QBP_Q22  message to request patient information

- Ensemble (or TrakCare) sends back a synchronous RSP_K22 containing the patient data (name, dob, sex)

- The user checks the patient's information displayed on the monitor, takes vital signs and sends them to TrakCare (via Ensemble)

 

Last answer 15 November 2017 Last comment 15 November 2017
0   0 1
233

views

0

rating

Hello,

I'm looking for a way to programmatic ally add the parameter 'VALIDIFNULL' to classes that extent %SerialObject.

This to hopefully resolve the validation errors I'm getting  on webservice request messages, where certain properties are not required, but lower down the tree some properties are.

I have too many classes to do this manually and with the next SOAP wizard run I probably loose the added parameter.

Some help would be very much appreciated.

 

Regards, Michel

 

Last answer 15 November 2017
0   0 1
0

comments

99

views

0

rating

InterSystems is pleased to announce the availability of the following maintenance releases:

  • Caché and Ensemble 2016.2.3
  • HealthShare Health Connect v15.021 on core technology 2016.2.3

Caché and Ensemble 2016.2.3 are available on the same platforms as 2016.2.2

The full list of corrections can be found in the release notes.

+ 3   0 1
0

comments

145

views

+ 3

rating

Using the CSP Page Statistics

Application Performance Management

Introduction

A key part of Application Performance Management (APM) is recording the activity and performance of user activity. For many web applications the closest you can get to this is to record the CSP pages or CSP based services being dispatched.

Last comment 11 November 2017
+ 5   0 2
329

views

+ 5

rating

I have Ensemble/Healthshare running in a production environment which is setup with a mirror failover and an arbiter sitting between them.

In the event of a failover we have a number of connections that need stopping/monitoring and starting in a certain order.

Is there a programmatic way we can detect the failover and stop certain services and operations immediately and then start them up again in the required order, checking their connection state before starting the next connection.

Last comment 10 November 2017
0   0 2
0

answers

206

views

0

rating

So this may sound trivial, but I'm seeing conflicting information on this topic and hoping to get clarification.

 

According to Enslib.HL7.Message class definition, the maxlength of RawContent is 10,000 characters. So when using encoding like UTF-8, that is 10KB. When using Unicode, that should then be 20KB.

But then also coming across some forums and documents where 32KB is maximum size before HL7 fields are truncated.

 

What is the sure way to determine and modify an interface's maximum supported message size?

Last answer 8 November 2017 Last comment 9 November 2017
0   0 1
805

views

0

rating

I have a DTL that reads an xml file and I want transform that to a list of objects but I have a problem looping through my xml as when I try I get the first instance on the xml not the whole XML being transformed. here is my example. Here is the output

 <s01:WardOccupancy>
<s01:WardOccupancy>
<Organisation>BYG</Organisation>
</s01:WardOccupancy>
</s01:WardOccupancy>
</msg>

from

Last comment 9 November 2017
0   0 1
0

answers

275

views

0

rating

So we are still fairly new to the ensemble app and getting set up. I have 3 seperate  batch record file services that pull in files and send to 3 seperate processes. there is no real rules other than an when condition=1 use this said DTL and send to operation. all 3 of these routers use different DTL's as they are seperate files but all go to the same operation. for some reason i am seeing the files sit in the Process and say  Delivered. 2 of the three process after up to 10-15 mins of sitting and the third gets an error i am very unfamiliar with, so this post is two-fold. 

 

Last comment 8 November 2017
0   0 2
0

answers

212

views

0

rating

Hi-

Please excuse my rather limited knowledge of HL7.

In Ensemble, I have a HL7 message that contains several Z segments.  I have created a custom schema to represent the new Z segments along with the new DocType Structure and Message Structure

How does Ensemble/Health Connect know which custom schema to use?  I believe it has to be indicated in the MSH segment somewhere, but not sure where exactly that would be.   Is the version simply updated with the new schema name or is there some other field?

TIA

Ken

Last answer 8 November 2017
0   0 1
0

comments

137

views

0

rating

Hi Community. I have a vendor sending us X12 837 claims, they are sending a mixture of 4010 and 5010 formatted claims. Is there a way I can examine the file contents and determine the message format and route to two separate folders based on format (4010 vs 5010). I've tried setting up a record map, stream container and vdoc services and processes with no luck. Any help would be appreciated.

Last answer 7 November 2017
0   0 1
0

comments

382

views

0

rating

I have an Ensemble installation with an FTP business operation which I would like to connect to a server over SSL in explicit mode (see also: https://www.rebex.net/kb/tls-ssl-explicit-implicit/default.aspx). I keep running into timeouts while attempting to do this via Ensemble. Does Ensemble actually support SSL in explicit mode??? Because I can't seem to find any setting where to switch it on.

Last answer 7 November 2017
0   0 1
0

comments

238

views

0

rating

I am trying to replace one of our SQL Integration Service jobs with Ensemble and I am running into an issue executing a query against a MS SQL database using JDBC drivers.

My SQL Outbound code looks like this.

Last answer 5 November 2017 Last comment 3 November 2017
+ 1   0 1
326

views

+ 1

rating

Hi guys,

     I have accidentally clicked the remember password option in my Ensemble studio. So it is now not asking for username and password and even the authentication popup is not showing every time i open the studio.

    Is there anyway to remove the remember password option for the cache studio.

 

Thanks,

Last answer 3 November 2017
0   0 1
0

comments

161

views

0

rating

Hi guys,

   I am trying to run a command line code using $zf(-1) in cache terminal. it is returning access denied error.

I have tried to run the code in cmd itself it is also throwing Access denied error. But if opened cmd as administrator and run the same code it is working perfectly. I am using windows system. 

Hence i need to know how can i run the cmd line code as administrator using our terminal or studio. Please help me out.

Thanks,

Mani

Last answer 3 November 2017 Last comment 3 November 2017
0   0 1
486

views

0

rating

I have a text file that is fixed width delimited and am using a BPL to process this file, ultimately performing a transform from the text file to an HL7 message. I created a DTL, mapping from the recordmap to the HL7. In my BPL, I am performing some loops and other logic (that all is working). My issue is what to do when I perform the Transform.

Last answer 2 November 2017
0   0 1
0

comments

252

views

0

rating

Greetings to all! Faced with such a problem, I ask for help, someone with great practical skills I think has already implemented this. The task was not to delete any objects from the database, but somehow mark this data deleted by client, because of this, I added Property Deleted As% Boolean [InitialExpression = 0]; in the class. And in the redefined method %OnDelete:

Last answer 1 November 2017 Last comment 2 November 2017
0   0 1
280

views

0

rating

Hi All,

  I have a rasing task from BPL using <call>, it needs to add an entry in workflow task list and the task has to rais.

  after performing, 

  I didn't see the entry in workflow task list, but the task gets raised.

  In What is the root cause for this.

  Why there is no entry in tasklist after raising task?, How to verify it?

 

Thanks

Last answer 27 October 2017
0   0 1
0

comments

116

views

0

rating

Hi all,

For special definition of the company, we need to define a PoolSize according to the environment that the "Ensemble" is working.

So the first try as been add the parameter into "System Default Setting"

However, this parameter is not available in "Setting default values" in Setting tab.

I've opened the code of my production and I've noted that this parameter is a attribute of the XML element of this item

Last answer 25 October 2017
0   0 1
0

comments

180

views

0

rating

I have a batch record mapper that reads a csv file and passes the message to a process that uses the EnsLib.MsgRouter.RoutingEngine and would like to pass the message to an operation that will output that as a XML file but so far been unlucky as the operation that I use , uses the EnsLib.EDI.XML.Operation.FileOperation which only works with the messages("BusinessOperation class for writing XML messages to a file.

Last answer 25 October 2017
0   0 1
0

comments

382

views

0

rating

Hi everyone,

before contacting WRC i thought to ask dev com about some questions related to Ensemble DICOM related implementation. These are more practical things and I hope to have someone around with experience in the field. We´ve created a DICOM Worklist application and are now in the process of roll-out.

Last comment 24 October 2017
0   0 2
0

answers

332

views

0

rating

The Installer Manifest has the option to modify the production level settings for AutoStart but is there a way to change settings such as ActorPoolSize and other settings? What would the format be to change such a setting to change the ActorPoolSize to 2?

<Production Name="MyProduction">

??????

</Production>

Last answer 23 October 2017
0   0 1
0

comments

192

views

0

rating

I was wondering if anyone has a good way to process individual messages from a queue. I run into this fairly often where I have test data coming in that I am queuing at the disabled business process, while I am working on the DTL or class to process the messages. What I would like to do is be able to send one message through to see the effects of my changes. What happens is I turn the business process back on and all of my test data goes through the current DLT/class set up. If anyone has any insight it would be greatly appreciated.

 

Thanks!

Last answer 23 October 2017 Last comment 23 October 2017
0   0 0
309

views

0

rating

Hello Community,

I need advice converting a comma delimited string container with multiple records into some type of recordmap that iterates through all the records.

My string container has several records and I would like to loop through the number of records in the string container and transform each record in the container individually. Number of records will vary but the number of fields per record is static (28 fields). Meaning after every 28 fields, a new record begins. The goal is to convert to individual delimited flat file records.

Last answer 23 October 2017 Last comment 16 October 2017
0   0 2
222

views

0

rating