New post

#Best Practices

37

Best Practices recommendations on how to develop, test, deploy and manage solutions on InterSystems Data Platforms better. 

I needed to know programmatically if last ran failed or not.

After some exploring, here's the code:

ClassMethod isLastTestOk() As %Boolean
{
  set in = ##class(%UnitTest.Result.TestInstance).%OpenId(^UnitTest.Result)
  for i=1:1:in.TestSuites.Count() {
    #dim suite As %UnitTest.Result.TestSuite
    set suite = in.TestSuites.GetAt(i)
    return:suite.Status=0 $$$NO
  }
  quit $$$YES
}

1 4
1 583

A few years ago, I was teaching the basics of our %UnitTest framework during Caché Foundations class (now called Developing Using InterSystems Objects and SQL). A student asked if it was possible to collect performance statistics while running unit tests. A few weeks later, I added some additional code to the %UnitTest examples to answer this question. I’m finally sharing it on the Community.

5 2
2 569

In this article, we will run an InterSystems IRIS cluster using docker and Merge CPF files - a new feature allowing you to configure servers with ease.

On UNIX® and Linux, you can modify the default iris.cpf using a declarative CPF merge file. A merge file is a partial CPF that sets the desired values for any number of parameters upon instance startup. The CPF merge operation works only once for each instance.

Our cluster architecture is very simple, it would consist of one Node1 (master node) and two Data Nodes (check all available roles). Unfortunately, docker-compose cannot deploy to several servers (although it can deploy to remote hosts), so this is useful for local development of sharding-aware data models, tests, and such. For a productive InterSystems IRIS Cluster deployment, you should use either ICM or IKO.

Open Exchange app
6 3
1 568

AnalyzeThis is a tool for getting a personalized preview of your own data inside of InterSystems BI. This allows you to get first hand experience with InterSystems BI and understand the power and value it can bring to your organization. In addition to getting a personalized preview of InterSystems BI through an import of a CSV file with your data, Classes and SQL Queries are now supported as Data Sources in v1.1.0!

6 4
0 560

InterSystems IRIS Business Intelligence allows you to keep your cubes up to date in multiple ways. This article will cover building vs synchronizing. There are also ways to manually keep cubes up to date, but these are very special cases and almost always cubes are kept current by building or synchronizing.

2 1
0 558 
   _________ ___ ____  
  |__  /  _ \_ _|  _ \ 
    / /| |_) | || |_) |
   / /_|  __/| ||  __/ 
  /____|_|  |___|_|

Starting in version 2021.1, InterSystems IRIS began shipping with a python runtime in the engine's kernel. However, there was no way to install packages from within the instance. The main draw of python is its enormous package ecosystem. With that in mind, I introduce my side project zpip, a pip wrapper that is callable from the iris terminal.

Open Exchange app
6 6
1 552

On this GitHub you can find all the information on how to use a HuggingFace machine learning / AI model on the IRIS Framework using python.

1. iris-huggingface

Usage of Machine Learning models in IRIS using Python; For text-to-text, text-to-image or image-to-image models.

Open Exchange app
6 5
1 540

Surely you have all heard about FHIR as the panacea and solution to all interoperability and compatibility problems between systems. Right here we can see one of his classic defenders holding a FHIR resource in his hand and enjoying it immensely:

But for the rest of us mortals we are going to make a small introduction.

Open Exchange app
9 3
5 533

[Background]

InterSystems IRIS family has a nice utility ^SystemPerformance (as known as ^pButtons in Caché and Ensemble) which outputs the database performance information into a readable HTML file. When you run ^SystemPerformance on IRIS for Windows, a HTML file is created where both our own performance log mgstat and Windows performance log are included.

Open Exchange app
12 2
4 516

Hi, developers!

Currently, I'm working on a project that requires highly dynamic event management. In the context of the Java programming language, my first instinct should be to opt for the "Observer Pattern", which is an approach to managing interactions between objects by establishing a notification mechanism. It allows multiple observers to react to changes in the state of a subject autonomously, promoting code flexibility and modularity. If you are not familiar with this design pattern, check out Wikipedia to find more information about it.


While it's natural and commonly used in certain programming languages as Java and C++, in ObjectScript, it's quite a different story.

Open Exchange app
10 3
4 500
Article
· Jan 8 9m read
IRIS Document Database (DocDB)

InterSystems IRIS Document Database (DocDB) offers a flexible and dynamic approach to managing database data. DocDB embraces the power of JSON (JavaScript Object Notation), providing a schema-less environment for storing and retrieving data.

It is a powerful tool, enables developers to bypass a ton of boiler plate code in interaction with existing applications, serialization, pagination and integration. the seamless flow of DocDB with Interoperability Rest services and operations, gives a big leap in API production and management.

for full DocDB documentation Here. in the context of this article i will showcase a use case in which DocDB will make a perfect fit.

Open Exchange app
10 1
0 464

Case description

Let’s imagine that you are a Python developer or have a well-trained team specialized in Python, but the deadline you got to analyze some data in IRIS is tight. Of course, InterSystems offers many tools for all kinds of analyses and treatments. However, in the given scenario, it is better to get the job done using the good old Pandas and leave the IRIS for another time.

4 3
2 443

image

This article will cover turning over control of provisioning the InterSystems Kubernetes Operator, and starting your journey managing your own "Cloud" of InterSystems Solutions through Git Ops practices. This deployment pattern is also the fulfillment path for the PID^TOO||| FHIR Breathing Identity Resolution Engine.

6 3
1 433
Article
· Jun 1, 2023 1m read
How to shrink the IRISTemp database

InterSystems FAQ rubric

You can set the maximum size of the IRISTemp database at IRIS startup by setting a configuration parameter called MaxIRISTempSizeAtStart.

After setting, the system will truncate IRISTemp to the set value (MB) at the next IRIS startup. If the current size is less than the specified MaxIRISTempSizeAtStart, no truncation will occur. Also, if 0 is specified, truncation will not be performed, so the size will start without changing. (Default) Settings are made from the menu below.

7 1
0 425

While starting the development with IRIS we have a distribution kit or in case of Docker we are pulling the docker image and then often we need to initialize it and setup the development environment. We might need to create databases, namespaces, turn on/off some services, create resources. We often need to import code and data into IRIS instance and run some custom code to init the solution.

Lajos Simicska declares war on Viktor Orban: "It's either him or me!" - The Budapest Beacon

And there plenty of templates on Open Exchange where we suggest how to init REST, Interoperability, Analytics, Fullstack and many other templates with ObjectScript. What if we want to use only Python to setup the development environment for Embedded Python project with IRIS?

So, the recent release of Embedded Python template is the pure python boilerplate that could be a starting point for developers that build python projects with no need to use and learn ObjectScript. This article expresses how this template could be used to initialize IRIS. Here we go!

Open Exchange app
6 1
3 420

We resume our series of articles on the FHIR Adapter tool available to HealthShare HealthConnect and InterSystems IRIS users.

In the previous articles we have presented the small application on which we set up our workshop and showed the architecture deployed in our IRIS instance after installing the FHIR Adapter. In today's article we will see an example of how we can perform one of the most common CRUD (Create - Read - Update - Delete) operations, the reading operation, and we will do it by recovering a Resource.

Open Exchange app
6 3
4 392

If you've worked with iKnow domain definitions, you know they allow you to easily define multiple data locations iKnow needs to fetch its data from when building a domain. If you've worked with DeepSee cube definitions, you'll know how they tie your cube to a source table and allow you to not just build your cube, but also synchronize it, only updating the facts that actually changed since the last time you built or synced the cube. As iKnow also supports loading from non-table data sources like files, globals and RSS feeds, the same tight synchronization link doesn't come out of the box. In this article, we'll explore two approaches for modelling DeepSee-like synchronization from table data locations using callbacks and other features of the iKnow domain definition infrastructure.

3 2
0 376

Like hardware hosts, virtual hosts in public and private clouds can develop resource bottlenecks as workloads increase. If you are using and managing InterSystems IRIS instances deployed in public or private clouds, you may have encountered a situation in which addressing performance or other issues requires increasing the capacity of an instance's host (that is, vertically scaling).

5 1
0 370

Your may not realize it, but your InterSystems Login Account can be used to access a very wide array of InterSystems services to help you learn and use InterSystems IRIS and other InterSystems technologies more effectively. Continue reading to learn more about how to unlock new technical knowledge and tools using your InterSystems Login account. Also - after reading, please participate in the Poll at the bottom, so we can see how this article was useful to you!

5 4
1 350
Article
· Dec 19, 2023 8m read
VIP in Azure

If you're running IRIS in a mirrored configuration for HA in Azure, the question of providing a Mirror VIP (Virtual IP) becomes relevant. Virtual IP offers a way for downstream systems to interact with IRIS using one IP address. Even when a failover happens, downstream systems can reconnect to the same IP address and continue working.

The main issue, when deploying to Azure, is that an IRIS VIP has a requirement of IRIS being essentially a network admin, per the docs.

To get HA, IRIS mirror members must be deployed to different availability zones in one subnet (which is possible in Azure as subnets can span several zones). One of the solutions might be load balancers, but they, of course, cost extra, and you need to administrate them.

In this article, I would like to provide a way to configure a Mirror VIP without the using Load Balancers suggested in most other Azure reference architectures.

8 1
3 315

We return with our example of using the FHIR Adapter, in this article we are going to review how we can configure it in our IRIS instances and what the result of the installation is.

The steps taken to configure the project are the same as indicated in the official documentation, you can review them directly here. Well, let's get to work!

Open Exchange app
3 1
1 286

csp-log-tutorial

Prerequisites

Make sure you have git installed.

I created a git folder inside the IRIS mgr directory. I right clicked the git folder and chose Git Bash Here from the context menu.

git clone https://github.com/oliverwilms/csp-log-tutorial.git

Clone my csp-log-tutorial GitHub repo if you like to try it out for yourself.

11 1
0 285