#Terminal

7

Posts that relate to discussions on utilizing the Terminal tool.

Hi all,

When is a Developer Community post not a Developer Community post? When it's just a few sentences wrapped around a link to InterSystems documentation! And what better way to finish up 2021 than by telling you about something cool that's been available since v2020.3? As the ball drops in Times Square, curl up with this:

Repeating Previous Commands

11 31
1 1.5K
I'm wondering what the best practice is for handling %Status values within the terminal. 
1. set tSC=...
    do $SYSTEM.Status.DisplayError(tSC)
 
2. set tSC=...
   zwrite tSC

3. An alternative?

Is there a meaningful difference between the two? Should one be used over the other for any reason? Should something else be used?

0 2
0 213

I just realized that operating system command execution does not work on Windows console if the IRIS service is started using a different user than Local System account (the default).

I always change the user configured in the IRIS service and I believe this is a standard good practice, particularly in "real" environments (be it production, stage, test or development) that are part of Windows Active Directory Domain.

1 1
1 291
Article
· Nov 28, 2023 2m read
k9s - Manage Your IrisClusters In Style

K9s is a terminal-based UI (aka kubectl clown suit), to manage Kubernetes clusters that drastically simplifies navigating, observing, and managing your applications in K8s, including Custom Resources like the InterSystems Kubernetes Operator (IKO) and ArgoCD Applications. If you are about to take your CKD, CKA, or CKS, leave k9s well enough alone for awhile as the abstraction to kubectl will become the standard for navigating the cluster and you will undoubtedly become estranged to the extended flags of kubectl and bomb the exam.

3 1
0 544

Hello Everyone,

We currently have CSP application that runs under 2 servers(usually primary), and every month the server reboots for patching SERVER1(primary) in the morning and SERVER2(backup) at night.

Whenever the SERVER1 reboots SERVER2 behaves as primary and when SERVER1 comes back up it will act as backup server.

First Patching:

So, when SERVER1 is down, I need to start httpd service for SERVER2 and stop httpd service for SERVER1 (which is now backup server).

0 5
0 324

For my Embedded Python ONLY demo package I need some user input.
Similar to ObjectScript

read "say somthing",reply

I use the Python equivalent

reply = input("say something")

And this works excellent without problems from Terminal or Doker console

BAD SURPRISE:
with WebTermnial ObjectSscript works fine, but embedded Python fails badly.

1 7
0 344

Hello,

I have set up a Docker image with IrisHealth Community Edition and created a backup of all databases with the Management Portal. Obviously, the restore requires a different way, i.e. a terminal or session needs to be started to use a "Do ^DBREST".

Due to the manual first a session (which is probably same as iristerm terminal) needs to be started:

docker exec -it iris iris session iris

If I enter "DO ^DBREST", I get the answer:

<NOROUTINE> *DBREST.

0 4
0 251

Hey ISC Community!

For a small automation feature I would like to login to the IRIS shell non-interactively, skipping the whole username and password prompts, providing the credentials through other means. Something in the fashion of "iris session <instance-name> --user myuser --pass mypass" would be great, but the session tool itself doesn't seem to be capable of doing this.

3 6
0 1.1K

Visual Studio Code, like Atelier, connects to IRIS through the Web Server and a web service, unlike Studio that connect to the SuperServer port.

What about the VS Code terminal? Does that open a shell with SSH or does it also use a web service?

In other words, does an IRIS developer using VS Code need direct access to the IRIS instance with SSH or the SuperServer port, in addition to the external or private web server to execute terminal commands?

Is that different with linux vs. Windows?

0 1
0 414

Hi Community,

Watch this video to learn the basics of how to use the InterSystems® command line interface to execute commands, including starting the Terminal, executing methods and routines, and exiting the Terminal.

⏯ Using the InterSystems Terminal

https://www.youtube.com/embed/-vL31qoz91s
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

3 0
0 304

Are you all ready for something you wish you knew ages ago (or, in my case, a DECADE ago)? Open up a portal in your favorite instance and go to:

System Administration->Configuration->Additional Settings->Startup

Scroll down to "Terminal Prompt" and click 'Edit'. This allows you to edit what you see on your terminal prompt. You can change that to my current setting: 8,3,2

What does this do? It adds your instance name for your prompt. So now your prompt can look like:

DEVELOPMENT:USER>

13 12
2 1.3K

Hi Developers!

There is a recent update came for developer community images of InterSystems IRIS and IRIS For Health.

This release comes with Environment variables support.

Currently 3 variables are supported:

  • IRIS_USERNAME=user to create
  • IRIS_PASSWORD=with password
  • IRIS_NAMESPACE=create namespace if doesn't exist

Here is what you can do - see below.

Start iris with your username and password created:

docker run --rm --name iris-sql -d -p 9091:1972 -p 9092:52773  -e IRIS_PASSWORD=demo -e IRIS_USERNAME=demo intersystemsdc/iris-community

Open Exchange app
6 1
1 786

Hi Devs!

For me, one of the most painful things about ObjectScript is ##class(Class).Method() typing to call a class method in code or in a terminal. I even submitted an idea to simplify it in ObjectScript.

But! There is a new feature in VSCode ObjectScript that was just introduced to the plugin - Copy Invocation!

Open Exchange app
10 7
2 716

Suppose you have developed your own app with InterSystems technologies stack and now want to perform multiple deployments on the customers' side. During the development process you've composed a detailed installation guide for your application, because you need to not only import classes, but also fine-tune the environment according to your needs.
To address this specific task, InterSystems has created a special tool called %Installer. Read on to find out how to use it.

16 9
4 4.6K

I was able to run the Cache terminal from the command prompt with the following command, in the namespace that I provided in the brackets:

cterm /console=cn_ap:ENSEMBLE[TEST_1]

But the command suddenly stopped opening the terminal in the correct namespace. It just opens it in the default namespace. I tried it with different namespaces or invalid namespaces, it always opens the terminal in the default namespace now.

I cannot figure out what is causing this behaviour.

0 5
0 1.3K
Article
· Nov 14, 2016 14m read
Mastering the JDBC SQL Gateway

As we all know, Caché is a great database that accomplishes lots of tasks within itself. However, what do you do when you need to access an external database? One way is to use the Caché SQL Gateway via JDBC. In this article, my goal is to answer the following questions to help you familiarize yourself with the technology and debug some common problems.

13 2
8 4.6K

Hello,

I need to run some clean up routine in the background so loss of my terminal session won't stop the process.

I found the JOB command in the documentation.
JOB | ObjectScript Reference | InterSystems IRIS Data Platform 2022.1

When I try it, it doesn't seem to be doing much. I also expected this to become visible in the Background Tasks but that doesn't happen either.

Probably I am missing something.

1 5
1 543

Hello

I am running a script from a CMD command line using : C:\CacheSys\Bin\cterm.exe /console=cn_iptcp:127.0.0.1[23] myscript.SCR %CD%

The script should authorize something (or not) in the following lines of the GO.CMD

But How can i return an information from inside the script to the GO.CMD script ?

Any idea ?

0 2
0 321