New post

#Mirroring

7

Mirroring is an InterSystems technology for High Availability, Disaster Recovery and Database Backup and OLAP solutions.

Documentation.

ISCAgent is automatically installed with Cache, runs as a service and can be configured to
start with the system. This is fine – but the complication comes when this is on VCS clusters with
Mirroring on. When installing a Single Instance of Cache in a Cluster, point number 2. Says “Create
a link from /usr/local/etc/cachesys to the shared disk. This forces the Caché registry and all
supporting files to be stored on the shared disk resource you have configured as part of the
service group.”

0 15
0 1.7K
Question
· Mar 23, 2017
problem with Mirroring

Hello, Thanks in advance for all replies. I have been practicing setting up mirroring between two development servers in preparation for mirroring our production server in a few weeks. I started by setting the servers up with minimum security which worked easily, then I set it up in lock down mode again without any issues. Now I am setting it up in lockdown mode with encryption and this one is testing me. I have everything setup but my async dr member cannot connect to the primary.

from cconsole.log

0 14
0 2.1K
Question
· Aug 2, 2016
Use of $ZUTIL(49) is deprecated

Hi all,

I'm using $ZUTIL(49) to get information of the databases I want to add to a mirror. This information is passed to ##class(SYS.Mirror).CatchupDB(plstPathDatabases) in order to Catchup all databases addes to a Mirror.

0 11
0 756
Question
· Aug 4, 2021
Azure Mirroring - VIP

Has anyone firstly got VIP working for mirroring in Azure? We are pretty sure that this won't work but I wanted to verify it.

Has anyone used the Azure Load balancer to act as a Virtual IP and if so was a application gateway required.

Interested to know your experiences in getting this working.

0 9
0 691

I've created a scheduled task that dumps HL7 messages to flat files. It uses the OutputToLibraryStream() method of EnsLib.HL7.Message. I'd like to be able to run it on a mirror member host whether it's primary or backup.

When run against a database that's mounted read-only, it works fine. However, when I attempt to run it against a mirror backup database, I get the following error:

#5002: Cache error: <PROTECT>%LoadData+7^EnsLib.HL7.Message.1

Tracing that back to the source, I find:

0 9
0 483

I am new to setting up a mirror environment....

We will have a Arbiter, Two Failover members (A,B), and a Async (DR) member (C). I have the two failover members in sync and are configured for Arbiter Control.

My question is about the Async member, when I initially set it up I pointed it to the mirror on the primary node A.

Is that correct?

0 8
0 322
Question
· Oct 30, 2016
ISCAgent debug

Good day!
Is there an opportunity to debug the ISCAgent behaviour (in Linux)? ISCAgent uses /etc/iscagent/iscagent.conf as configuration file, but in docs I've found a description only for two parameters (port number and interface - http://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY=...). Other parameters I can see by running /usr/local/etc/cachesys/ISCAgentCtrl status:

1 8
0 2.9K

Hi,

Can a Cache Mirror be used in the cloud ? (ie stand up a Primary and Backup member instances in a High Availability Cache Mirroring configuration)

I'm investigating the validity of this configuration, because I was of the understanding that this may not possible due to these cloud servers not (typically) having fixed ip addresses, which interferes with the Virtual IP settings for the mirror set.

Is this correct, and if there are workarounds (like Load Balancing ?) can I have details on how this should be configured ?

1 8
0 977
Question
· Aug 18, 2016
Read only Async mirror setup

I have setup an async reporting mirror member with Read only access. My problem is that if I try to do any sql reporting against that data I am getting errors. I am sure that this is because the DB is read only, but I had assumed that setting up a reporting mirror would handle this.

I there a setting or mapping I am missing?

0 7
0 755

Does anyone have experience with installing the Arbiter Container using Podman instead of Docker in a Red Hat environment? I was able to pull down the docker image, but unsure what are the next steps as I am confused on how to start the container using Podman and ensure the parameters are set appropriately? Does anyone have the steps that I should take? Should I go through the WRC? Does the WRC have experience using Podman?

Or should I just install the ISC Agent instead of using the Container?

Please and thanks,

Scott Roth

0 7
0 561

I had a question about using ZSTART, ZSTOP, and ZMIRROR.

  • If we use them and it is not correct, does it mess up with any of the existing functionality?
  • So, if I create a ZSTART with a simple command of starting the %JDBC Server will that mess up anything existing in the Startup sequence?
  • Is ZSTART, ZSTOP, and ZMIRROR just an extension of the existing functionality, or does it alter how the built in functionality runs?
  • Should we tread lightly in the use of them?
2 7
1 364

Hello everyone!
Maybe someone will tell me what could be the reason for such messages in the message.log file

05/03/23-06:46:27:155 (6584) 0 [Utility.Event] [SYSTEM MONITOR] Mirror state: Member type = Failover, Status = Transition
05/03/23-06:46:27:350 (1620) 1 [Utility.Event] Failed InstanceLookup (agent probably not running): instance not found
05/03/23-06:46:27:351 (1620) 2 [Utility.Event] Failed to become either Primary or Backup at startup

0 6
0 375

Is it possible to use one IIS server to configure Webgateway and external Webserver for management portal when implementing synchronous mirroring with VIP i.e Is it necessary to have two mirror servers(primary and Backup) , one Arbiter server, one Webserver for Webgateway and a sperate webserver for management portal?

If anyone can please point to any documentation on Mirroring with Webgateway and external webserver for management portal will be really helpful.

Thank you for your help

0 6
0 157

Hello,

I work on deploying IRIS inside Docker container. I really like %Installer class can automate many steps. I want to establish an ECP connection to a mirror database and then define a remote database on the application server. I have already seen we can create local database and namespace in %Installer. What code is needed to establish ECP connection?

0 6
0 648

When I create a TASK on the Primary mirror member and Try to create the same TASK in the backup mirror member, It Gives me CSP Application error.

The TASK gets created in the Primary node without any errors and When creating in the Backup node it prompts the error.

It happens is IRIS and I didn't face this in CACHE.

Finally what I did is export the TASK in Primary and Imported in Backup.

Is this a feature of IRIS?

0 6
0 285

The SYS.Mirror CatchupDB() method requires a System File Number/Inode value as a parameter. I have not yet found a suitable internal method to get this value. Is anyone aware of a utility method that would do this? I do know I can get this value with a small amount of Python or by calling out to the OS. However I wanted to stick with pure Objectscript in this project if possible.

Failing in this I will use embedded python to run the line or two of Python needed to get this value.

Thank you for any hints

0 5
0 100

Hello Everyone,

We currently have CSP application that runs under 2 servers(usually primary), and every month the server reboots for patching SERVER1(primary) in the morning and SERVER2(backup) at night.

Whenever the SERVER1 reboots SERVER2 behaves as primary and when SERVER1 comes back up it will act as backup server.

First Patching:

So, when SERVER1 is down, I need to start httpd service for SERVER2 and stop httpd service for SERVER1 (which is now backup server).

0 5
0 292

Hello, we deploy IRIScluster using IKO on Red Hat OpenShift deployed in AWS. For DR, we have another AWS region on stand by. We do daily backups. I run a standalone IRIS in the second region. I want to add it as async member to the mirror to have some essential data available in the standby region. Is this possible?

0 5
0 237

Hi,

I have a DR member and in this cache server the database "cachetemp" start to getting bigger without any reason (50GB that was all the free disk space we have)

In the members of the mirrors the cachetemp its ok and the size is 31MB.

I restarted the server because I read that the cachetemp database purge when restarting, but didnt happend.

Any recommendation to clean this database? can I just deleate the CACHE.DAT from this database?

Thanks!!!

0 4
0 959

Is it possible to make the cache terminal available over a mirrored vip address for a healthshare mirrored environment? So that connecting to a terminal for a mirrored environment will always connect to the Live Node?

I'm looking to write a Powershell script to run against the system and need to connect to the Live Node in a mirrored setup. Is this possible or am I going to have to log onto each node to establish which is Live. Or does this even matter?

0 4
0 494