Mirroring

Syndicate content 13 

Hello,

I work on deploying IRIS inside Docker container. I really like %Installer class can automate many steps. I want to establish an ECP connection to a mirror database and then define a remote database on the application server. I have already seen we can create local database and namespace in %Installer. What code is needed to establish ECP connection?

Last reply 4 June 2020
0   0 3
98

views

0

rating

Hi, we have mirrored databases, now we have three nodes. Primary, backup, async. They are sync by journals and with some TB each node (expensive storage).

I would like to have a scenario where the two nodes (Primary and backup) have the same amount of messages (purge task of x days) , both as failover, but the asynchronous node should have more messaging, as much as the storage allows us. We want to use this node so provider can give support(search old messages), but not have databases in production that are so large that they are hardly consulted.

Any ideas?

0   0 3
69

views

0

rating

Hi,

I want to know if there is a way to manually change Primary to secondary  and vice versa?

I need this becasue we backup the two VMs (primary and secondary) and my idea is to make a script to when the primary VM is going to backup with Veeam change to "backup" on the mirror.

 

Thanks!!!

Last reply 29 April 2020
0   0 2
105

views

0

rating

Hi

I'm using this query "Config.MapMirror.List" To get information of the list of servers that are in the mirror system.

I'd like to know how can I know which of the list is the primary and which is the failover or async member.

Is there a way to do it with this query? Is there another query to get this info?

Thanks a lot

Last reply 30 January 2020
0   0 4
194

views

0

rating

I've created a scheduled task that dumps HL7 messages to flat files. It uses the OutputToLibraryStream() method of EnsLib.HL7.Message. I'd like to be able to run it on a mirror member host whether it's primary or backup.

When run against a database that's mounted read-only, it works fine. However, when I attempt to run it against a mirror backup database, I get the following error:

#5002: Cache error: <PROTECT>%LoadData+7^EnsLib.HL7.Message.1

Tracing that back to the source, I find:

Last reply 20 September 2019
0   0 2
140

views

0

rating

I'm trying to create a simple mirror with two Cachés 2016.2.1.803 Instances,

but after i create the mirror with the primary and try to connect the fallouver server, i receive the following message:

 

ERRO #2071: Erro ao recuperar informações do conjunto espelho para 'BPLUS'. Erro: Connection failed: Unexpected error: <READ>SSLServer+191^MIRRORCTL

i'm not using ssl on this configuration, tried with arbiter and without, same effect.

Tried with Caché 2018.1 and Caché 2016.2.1, same problem.

Some tips?

Best,

0   0 1
159

views

0

rating

I've setup ODBC connection so I can access Cache data within SQL Server.

I want to be able to write SQL queries for internal monitoring purposes, similar to what's possible with SQL Server.  Specifically I want to be able to check mirroring status (i.e. check which is the current primary mirror member), check the status of any Ensemble productions (started/stopped), check the status of business hosts etc.  I want to do all of this from SQL Server to go with our other system monitoring solutions.

0   0 1
134

views

0

rating

I have a DR Mirror   with a WIJ that is 5 times as large as the Primary Failover member. My Read-Write Reporting mirror WIJs are the same size as the Primary.  I don't  know why the DR WIJ i so large and would like to shrink it to the same size as the others.  Any suggestions are welcome. Thanks!

0   0 3
194

views

0

rating

Hi guys

I've added a new mirrored failover member to an existing one.

They are both Arbiter controlled.

When I do Add database to mirror on the primary I'm always getting an error. Missing Mirrored database.

I followed everything in the documentation and always get the same error.

I've copied the CACHE.dat file after umounting the database on both servers. then mounted them.

Could you help me out?

 

Kind Regards

0   0 0
206

views

0

rating

Hi, would really appreciate your advice on how I can restart the mirror-monitor. I've followed the instructions and restarted the mirror monitor, and still the status seems to be down. Can you point me to some resource or steps that I can follow ?

I logged into %SYS terminal and restarted the mirror monitor and it says that it is running

Last reply 30 December 2018
0   0 4
267

views

0

rating

Hi All!

I asked previously about the DR server in the cloud but actually, I'm curious about the backup server to use as analytics server more than for recovery in DR case.

There is a recommended practice to use an async mirror as a server for BI (InterSystems Analytics, DeepSee)

The question is if I have PRIMARY in the cloud (AWS, Google, Azure, etc) "how far" should async mirror member be placed? Same cloud, same private cloud or it doesn't matter at all for analytics purposes?

Last reply 16 November 2018
0   0 2
202

views

0

rating

In System Administration | Configuration |  System Configuration | Journal Settings there is a check box for Freeze on error.

From reading the documentation, it sounds like the choice to freeze on error is one of system availability vs system integrity.

Curious to know whether Ensemble users choose to freeze on error or not.

If you have a best practice recommendation based upon your experience or knowledge, that would be helpful information too.

Last reply 4 June 2018
0   0 4
174

views

0

rating

I have Ensemble/Healthshare running in a production environment which is setup with a mirror failover and an arbiter sitting between them.

In the event of a failover we have a number of connections that need stopping/monitoring and starting in a certain order.

Is there a programmatic way we can detect the failover and stop certain services and operations immediately and then start them up again in the required order, checking their connection state before starting the next connection.

Last reply 10 November 2017
0   0 2
284

views

0

rating

Is it possible to make the cache terminal available over a mirrored vip address for a healthshare mirrored environment? So that connecting to a terminal for a mirrored environment will always connect to the Live Node?

 

I'm looking to write a Powershell script to run against the system and need to connect to the Live Node in a mirrored setup. Is this possible or am I going to have to log onto each node to establish which is Live.  Or does this even matter?

Last reply 6 November 2017
0   0 1
268

views

0

rating

Hi All

I'm looking for some field experiences, lessons learned, or actual deployed solutions to the problem of replicating non-CACHE.DAT data in a mirrored Cache environment.  

Environment:

  • Operating System is IBM AIX
  • Hardware is IBM Power w/ virtualised storage
  • Cache 2017.1
  • 2x Production mirror members
  • 1x DR mirror member

 

There are a number of different data types that we're looking at mirroring, and a number of identified solutions.  The two main types of data to be mirrored outside of Cache mirroring are:

0   0 2
290

views

0

rating

Hello,  Thanks in advance for all replies.  I have been practicing setting up mirroring between two development servers in preparation for mirroring our production server in a few weeks.  I started by setting the servers up with minimum security which worked easily, then I set it up in lock down mode again without any issues.  Now I am setting it up in lockdown mode with encryption and this one is testing me.  I have everything setup but my async dr member cannot connect to the primary.

 

from cconsole.log

Last reply 30 March 2017
0   0 1
996

views

0

rating

Hi,

Initially when setting up a cache instance one creates or imports the user/ resources roles etc .

After the Mirror has been activated you can add users, resources etc. But when trying to add new SQL Table privileges to a namespace where the databases are mirrored it seems that you are not able to , Getting error: 

ERROR #5002: Cache error: <DIRECTORY>SQLUserPrivsExecute+13^%SYS.SQLSEC

SOURCE ELEMENT: %CSP.UI.Component.SQLTables (SQLTables)


How do you maintain these privileges?

 

 

0   0 1
216

views

0

rating

Good day!
Is there an opportunity to debug the ISCAgent behaviour (in Linux)? ISCAgent uses /etc/iscagent/iscagent.conf as configuration file, but in docs I've found a description only for two parameters (port number and interface - http://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY=...). Other parameters I can see by running /usr/local/etc/cachesys/ISCAgentCtrl status:

Last reply 7 November 2016
+ 1   0 3
971

views

+ 1

rating

ISCAgent is automatically installed with Cache, runs as a service and can be configured to
start with the system. This is fine – but the complication comes when this is on VCS clusters with
Mirroring on. When installing a Single Instance of Cache in a Cluster, point number 2. Says “Create
a link from /usr/local/etc/cachesys to the shared disk. This forces the Caché registry and all
supporting files to be stored on the shared disk resource you have configured as part of the
service group.”

Last reply 26 October 2016
0   0 2
609

views

0

rating

I have setup an async reporting mirror member with Read only access.  My problem is that if I try to do any sql reporting against that data I am getting errors.  I am sure that this is because the DB is read only, but I had assumed that setting up a reporting mirror would handle this.

 

I there a setting or mapping  I am missing?

Last reply 23 August 2016
0   0 2
427

views

0

rating

Mirroring provides an admin capability to Stop Mirroring on this member, which causes a non-primary member to temporarily disconnect from the primary, stop dejournaling, etc.  While most system administrators may never need or use this function, some employ it for certain kinds of maintenance or other special cases.

Last reply 7 June 2016
+ 2   0 2
272

views

+ 2

rating