Cures Act USCDI/ C-CDAv21 certification. I am looking for SDA3 examples for Newman-Bates-Kid/registry settings/advices on how to learn / whatever is helpful. InterSystems xsl files are clean but I am not working very often with xsl. I am mainly looking at Provenance and Clinical Notes, the 2 last errors we have. InterSystems documentation, so far I know, is very poor: only classes and some pages. Support has a small knowledge about SDA3 -> C-CDAv21 even if they try very hard to help.

1 2
0 315

Hi all,

I'm fairly new to this engine so I was wondering what the best approach for creating a dynamic mapper to downgrade from one HL7 version to another (e.g 2.4 to 2.3) with the DTL Editor, It seems like something that would be quite commonly needed but I haven't found a method that works yet,

0 6
0 620

Morning everyone,

I would appreciate some advice please- hopefully there is plenty of experts out there.

We are setting up an sFTP share between hospital trusts here in the UK and I have set the outbound operation up using a custom extension of EnsLib.HL7.Operation.FTPOperation.

We are configuring a VPN tunnel to run between the sites also so there is a bit of firewall / network routing to take place to enable the connection but to add in a complication we are on a mirrored cluster and usually present on a Virtual IP address.

0 2
0 494

A mistake happened and records were assigned the wrong assigning authority name: PID3.4.

Everything else was correct. This resulted in duplicate records. Ex

Record 1: MRN1 has AA1 and clinical data

Record 2: MRN1 has AA2 and the same clinical data as Record 1 + more clinical data that is not in Record 1

I would like to remove Record 2 ensuring that there are no orphan records left.

0 1
0 265
Question
· Sep 20, 2022
Read Only Service Registry

I'm trying to create a read-only role for most pages on the Management Portal. However, I cannot figure out resource permissions for the HealthShare tab or how to assign custom resource permissions, if any, to the registries. I would like for the role to include read-only access to the registries (service, consent, otherwise). How do I go about doing this?

0 1
0 212
Question
· Oct 6, 2022
MDX Syntax Help

we have this container code where we want to create more CalcMember properties

<sharedCalcMember FullName="HSAAPATIENT||DEMOGRAPHICS||CITIZENSHIP.NATIONAL.sharedCalcMember" Dimension="Demographics" Name="Citizenship.National" Expression="[Demographics].[H10].[Citizenship].&amp;[USA]" SolveOrder="0" CubeName="HSAAPATIENT" UpperCaseDimension="DEMOGRAPHICS" UpperCaseName="CITIZENSHIP.NATIONAL"></sharedCalcMember>

0 3
0 231
Question
· Oct 7, 2022
Mirror Failover Settings

Hi All,

Our mirrored HealthShare environment has failed over a few times recently due to underlying infrastructure issues (that are being worked on and resolved).

In the HealthShare logs we are seeing:

10/06/22-00:54:35:925 (4736) 1 Journal Daemon has been inactive with I/O pending for 10 seconds:
gjrnoff=524741316,iocomplete=523852600,filecnt=1011,fail=0
10/06/22-00:54:55:086 (4736) 3 CP: Pausing users because Journal Daemon has not shown
signs of activity for 30 seconds. Users will resume if Journal Daemon is active again

My question is:

0 4
2 566

Hi,

I am trying to configure OAuth2 server to connect to Cerner Auth server to get FHIR API access token but I am getting the error "Discovery response not valid".

I can get the access token back okay from Cerner endpoint used in the OAuth configuration below via Postman and Manually sending the request via HTTP Operation from HealthShare, so the URLs I am using looks correct but the OAuth configuration is not working.

0 6
0 561

Hello guys,

I'm trying to install HealthShare on a virtual machine. The original language of this virtual machine was Russian, unfortunately I don't speak Russian hehehehe.
So I changed the original language to English, but when I installed HealthShare the portal was in English, but the terminal was in Russian and during installation it doesn't show me any option to select the language.

0 2
0 195

Hello,

We currently use codesets to normalize NDC code descriptions in our clinical viewer. Lately, we have started receiving RXNORM codes and they were only displaying the codes in the viewer and not the descriptions. After a short investigation, I found that the RXNORM codeset in the registry was empty. After filling this up, it still didn't resolve the description of the drug.

The SDACodingStandard in the SDA is an OID and I see it in the OID registry and does point to RXNORM.

0 2
0 330

Hello; I am using a custom class extending CodeTableDetail (actually it extends CodeTableTranslated) for a MedicalClaimLine.Extension property for a Procedure Modifier value, in addition to the existing MedicalClaimLine.ProcedureModifierItems property (this is a list of %String). This works very well, stored AND translated correctly, until a valid ProcedureModifier value is used that is all punctuation: ##, **, or ++.

0 2
1 174

Hi

This morning I noticed that the ISCAgent.log for one of my high availabilty healthconnect servers has many entries that say:

"Mirror remote control command requested access to instance directory not found in registry."
Requested:d:\intersystems\healthconnect\

In addition, Messages.log has many of the following entries:

0 1
0 332

Hi all,

I have a requirement to periodically poll a URL to fetch some XML data based on a list of query data, lets say every hour, and map what's returned to HL7 then send downstream, I mostly have everything contained within a business process and DTL but I'm lacking a way of invoking the process every X minutes,

The client has a prefence for as much as possible to be done via out of the box components in the standard HL7 model of "Service --> Process/Rule/DTL --> Operation" within the Web UI,

0 5
1 630
Question
· Aug 1, 2022
Email Template

Does anyone have any pointers or maybe familiarity of making Email templates in Objectscript?

I'm currently trying to implement Televisits with our system and am needing to send an email to the patient. I'd like to make it a nicer looking email which will require a good amount of inline CSS. I currently have a method, but is very much a sore sight for the eyes.

I was wondering if there was a way I could use Embedded HTML and pass that into the DO msg.TextData.Write command with the ##class(%Net.MailMessage)?

0 2
0 447

Hi guys,

Does rebuilding of Data Quality Manager cubes affect patient index linkage definition data?

What I want to understand is, does DQM have any negative impact on the data each time you rebuild the cubes.

Additionally, if I make changes to the cube and rebuild it..will this have any impact on the original data?

0 6
0 422
Question
· Nov 2, 2016
Healthshare FHIR Subscriptions

Hello All,

Having a recent project to create a FHIR repository, I want to know (as looking at the code) if HealthShare FHIR implementaton supports subscriptions?. I know it records the subscriptions ok, BUT does it handle sending the subscription out (based on the tags) to an endpoint (i.e. when a new FHIR request commits data that would trigger the subscription) ?, I'm 50% it doesn't, but would rather find out for sure before shoe horning something in.

Regards

1 9
0 1.1K

Hi:

Had an issue after upgrading to 2021.1 where search bar for interoability will bring up "INVALID ACTION".

On upgrading to 2022.1 this still occurs.

It did not occur on another environement that was upgraded from 2017.2 straight to 2022.1

Is there any solution? Loads up SYS in url rather than customnamespacename

Issue is the url for instance brings through ip/csp/sys/EnsPortal.DTLEditor.zen?$NAMESPACE=X

0 1
0 335
Question
· Jul 20, 2022
Default Database Resource

Can I please check if anyone know why the data base resource is created differently when creating a namespace after specifically selecting it to use the default resource %DB_%DEFAULT?

I created a namespace and when creating the DB I selected the option to use the default resource

When the namespace creation was complete , database is using a new resource instead of the default.

0 2
0 405

What's a good way to add a custom hyperlink to a table item in Clinical Viewer (CV2)? I am customizing the Diagnostic Studies page, and have a custom transform that returns the HTML code for the hyperlink. The hyperlink is supposed to open a custom CSP page in a new window or tab.

Using the layout editor, I then tried adding several "items" to the table like an Icon or External Viewer Link, and use the custom transform to get the hyperlink, but these items only show up as plain text and do not link to any page. How do I turn these items into a hyperlink?

0 2
0 407