#Ensemble

I have to write a DTL with the Data Transformation Builder to convert messages from HL7 ORU R01 v2.1 to HL7 ORU R01 v2.5. The incoming messages contain a text in OBX-5. This text contains LF characters (only LF - Segment separator is CR). Therefore it is not possible to parse the incoming message. While testing the transformation the OBX Segment ends at the first occurence of LF. Is there a way to replace the LF character before parsing?

TL;DR: If I set an Ensemble  Production Service based on EnsLib.File.PassthroughService to a Binary charset encoding, it breaks the file handling. Any ideas?

Full long post:

All,

I set up an Ensemble production to transfer files via SFTP, which works fine sending the files to my Linux server. Then I was informed that we needed to save a hash of the file, for comparison with the destination to verify the file arrived unmodified.

I am trying to create a rule which filters out ADT_A08 messages, when they have an OBX segment and their EVN.4 is "COD" or EVN.4 is "FIN"

The attempt is:

I have sent messages with EVN.4 COD or FIN and they are filtered out correctly

However if I remove EVN.4 and leave just the OBX filled up, the message passes from the Process to the Operation.

How could we express that if the message has OBX, we want it to be filtered out‽

I am working on a BPL to take data from a MS SQL database and create an HL7 Materials Message for our EMR.  I have done this plenty of times in the past however I am running into an error.

"Remote Gateway Error: JDBC Gateway SP execute(0) error 0: Access to the remote server is denied because no login-mapping exists."

What is confusing is that this BPL doesn't differ from any of my other BPLs in connecting to MS SQL Server. I know I am missing something..

I have a case where I have an external table that lives out in MS SQL. Using Ensemble Security functions has anyone created a csp or cls page that acts like a portal to allow users to Update a multidimensional table without knowing SQL? I could clone the EnsPortal.LookupSettings but that was made for LUT which are only 2 columns.

I know its a long shot but trying to see if there was anything off the shelf that I can use to help meet the requirements of this project.

The message in Ensemble has been retained for only 20 days, but the amount of data is still more than 300G. What should be done to reduce the storage capacity?
 

Hello,

I would like to catch an Adapter error in a try/catch. I have a problem with SMTP and SFTP adapter when the connection failed after 15 seconds.

 Here is an example of my code for the SFTP adapter:

Try{
  . //creating a stream file character
 
 //Trying to get a Status error if the PUTSTREAM doesn't work
 set tSC = .Adapter.PutStream("file.pdf",streamfile)
 //If any error : throw
 if $$$ISERR(tSC) THROW tSC
}catch Exception{
 set pOutput= ##class(MyResponse).%New()
 set pOutput.

Hello team,

I am trying to do a basic read file of HL7 messages. Need to count how many FT1 segments are there in each file and how many messages are in each file.

Any help will be appreciated. I have the stream object.

Just need to loop through the stream and get the info in some way.

Any help will be appreciated.

Thanks,

Jimmy Christian.

Hi everyone,

I am currently sending an HTTP POST request to an EnsLib.HTTP.Service service (which has an EnsLib.HTTP.InboundAdapter associated).  In this request there is just one header: 

I wuold like to get it from my request . I have tried in several ways but I can't: 

set reqFrom = %request.GetCgiEnv("HTTP_requestFrom")

set reqFrom = pInput.Attributes("requestFrom")

and working with the imbound adapter but it didn't work.

What is the correct way to do that?

Thank you in advance for your help. 

Off the back of the Interface Monitoring post I had created a class that queries the Ens.AlertRequest global and returns the entries between 6pm the night before and 6am in the morning.   

I tested this build in our T&D environments and the build worked very well.

However in our production environment the query is being truncated, by what I believe to be a timeout and I get a partial query output.

In the System>SQL pages my 12 hour query times out.

I compared the Global size by running a SELECT MAX(ID) query and got a return of 60,244,962 records.

 the file being created on the FTP server will have a format that includes the current date I would like to pull this file off the FTP while ignoring other files on the same location.

Inbound Service Class

I would like to find the file on the FTP that is being created using Todays date. But it appears that the wildcard are not recognizing the file format:

Example below. This will not pull the file "ErrorFile_20191216.txt"  off the FTP but it should. Should I be using custom code or can utilize  something built in to do this. Am I missing something? Thanks in advance.

Im usually pretty good at ComplexMaps and implemented a couple, but I have one that is stumping me on how I can implement it.  My problem is I have no real "leading data" to key off of and need something else...

It goes a little bit like this:

D123456     THING1   THING2    THING3   THING4

D789101     THING1   THING2    THING3   THING4

T    THINGX    THINGZ
In looking at the above, I need two record maps, one for the "D" rows (repeating) , and one for the "T" row, which is basically the trailer.

Hi everyone, 

I am currently sending an HTTP POST request to an  EnsLib.HTTP.Service service (which has an EnsLib.HTTP.InboundAdapter associated). 

Here the request URL: http://10.41.11.210:57772/csp/healthshare/dce/POSTServiceClass.cls?rpyT…

From the documentation I have read (https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cls?KEY=EHTTP_inbound) I get that the form variables are written into the request body in case of a POST. I have also implemented the OnInint() is this way to enable the form variables parsing: 

 Method OnInit() As %Status
{
    Set 

Olá pessoal,

Compartilho material de um curso desenvolvido por mim, espero que possa ajudar a comunidade.

English:

Hi folks,

I share material from a course developed by me, I hope it can help the community. The material is in Portuguese.
 

Link: https://www.linkedin.com/posts/cristianojs_material-te%C3%B3rico-activity-6608421528906285056-sr8E

For simplicity sake let's say that we talk about active production.

I need to know if the business host is added to the production or not.

Currently I have:

do ##class(Ens.Director).IsItemEnabled("HostName", .sc)
set defined = $$$ISOK(sc)

Which looks like a workaround.

Hello,

I've got a table with many attributes and data. There is 10 000 000 registrations approximatly.

I need to make a research on this table with filters, paging,  and order.

You can see an example of my  SQL request : 

SELECT * FROM ( SELECT TOP ALL  * FROM ANCV_Data.Titre WHERE etatTitre = 'Emis' ORDER BY numRemise desc) v WHERE %vid BETWEEN 1 AND 25

Cause there are many data on my table, my SQL req is  too long if I don't have index on my attributes BUT there are many associations possible...

Are they any solutions ?

Regards,

Hi,

What is the best practice when adding FHIR extension to Patient resource? To not to lose it when updating Patient base class etc.

Krystian

A quick start guide to connect Ensemble to RabbitMQ using the RabbitMQ Java Client, a Java proxy class and the Ensemble Java Gateway.

Word and PDF documentation, source code and utilities available at https://github.com/toncat/ensemble2rabbitmq.

#Software Versions Server

• Windows Server 2012 R2 x64
• Erlang OTP 19.1
• RabbitMQ Server 3.6.5
• RabbitMQ Java Client 3.6.5

Client

• Windows Server 2012 R2 x64
• Java JDK SE 8u111
• RabbitMQ Java Client 3.6.5
• Ensemble 2016.2.0.736.0

#RabbitMQ

##Install Server http://www.rabbitmq.com/install-windows.

BridgeWorks is pleased to announce a VDM, v9.1.0.1.

Hi,

I have a business service that needs to run only once a day at an specific time. It is important that the service only runs once.

I have tried the scheduler but you can only define the times (start-stop) when the service will be running...so this will not work for me as I need this to run only once.

Looking at the documentation I found "tasks".

I am sending a HL7 message from a Service called Servicios.Interconsulta PeticionInterconsultav01r00  to a Bussiness Process Process called
EnrutadorVisa doMedicamento using SoapUI

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:hl7-org:v2xml">
   <soapenv:Header/>
   <soapenv:Body>
      <urn:PeticionER7>
         <!--Optional:-->
         <mensaje><![CDATA[MSH|^~\&|sistemaExterno|PETICIONER7, C.S.^12010410|380316|EXTHL7|20170901122402|scsdaeint:VXSn0jEG0OlDz6vIRz5ewA==|ORM^O01^ORM_O01|21147891|E|2.

Hello,

I work with Ensemble Business Operation with SQL Outbound Adapter. I try to query a DSN defined database that happens to be Cache on the same machine in the same instance of Healthshare 2017.1.3. This worked fine on Linux server when I used JDBC driver. Now I want to run it on my Windows 10 laptop. I set up DSN and I can test connection successfully. I provided DSN in Operation DSN setting and I tried with and without Credential. I get ERROR <Ensd>ErrOutConnectFailed: ODBC Connect failed for 'myDSN'  / 'myDSN' with error ERROR #6022: Gateway failed: DSN/User Connect.

Hello Wonderful Community!

The question I have is: 

Can we set a Call Alert instead of an email alert (or both) in Ensemble when the system goes down? 

The message below is what we got via email. But I wanted to know if there is more functionality that allows to use a call system.

Subject: [CACHE SEVERE ERROR] Failed to allocate 43322MB shared memory using Huge Pages. Startup will retry with standard pages. If huge pages are needed for performance, check the OS settings and consider marking them as required with th.

Currently, many of you has some knowledge about CachéQuality (which is being renamed to objectscriptQuality) for analyzing objectscript code using the rules we have predefined. Probably you have tested it and have found too many warnings in your projects. I'm sure there are issues which are really important for you and some others which you would like to dismiss.

We have more than 90 rules to test different code situations and warn about a problem or a possible bug in code.

InterSystems has corrected a defect that can cause shadowing to fail with an access violation. In rare cases, the defect can cause memory corruption, leading to unpredictable behavior. 

Note: The defect does not affect mirroring.

This defect affects:

• InterSystems IRIS 2019.1.1 and 2019.3
• IRIS for Health 2019.1.1 and 2019.3
• HealthShare Health Connect 2019.1.1
• HealthShare Health Connect (HSAP) 15.032 on 2018.1.3
• Caché and Ensemble 2018.1.

In time for InterSystems Global Summit 2019 we at George James Software are pleased to offer a cloud-hosted evaluation environment where you can work with Serenji in Visual Studio Code, editing and debugging ObjectScript in a sandbox running InterSystems IRIS 2019.3 Community edition.

You can do it all from your web browser. Nothing will be installed on your workstation, nor will any settings have to be changed on it.

To take Serenji for a test drive please visit https://georgejames.com/dc-gitpod

Some time ago I developed an application that tackled a familarial problem faced by many developers when required to update multiple UAT or PRODUCTION sites with the latest Software patches that have been developed and tested on your DEV server and now need to be deployed to multiple sites running that software.

Hello community,

I have a very simple REST API connection doing a POST of JSON messages via AZURE APIM. 

It worked successfully for few weeks until a day ago when i started receiving a bad response as below.

I am currently working on an Upgrade to HealthShare 2019.1.1. As described in the steps once the upgrade was complete to run $system.OBJ.Upgrade(). When I run $system.OBJ.Upgrade() , it is not finding any classes to update. However I am getting an Error 5116 on one of my Productions...

I would like to control multiple 'services' in Ensemble.

I would like the ability to switch them off and on.

My plan is to achieve this in a Cache class using ObjectScript.

Is this possible?

Any tips, starting points would be gratefully received.

Many thanks.,