Friends , can anyone help in how to kill instances of a business process? We have searched the documentation and looked in the Production, We am not seeing how to perform this task.
I have a Business Service that reads a file from a folder and sends it as a string to a Business Process. In the business process, I need to add a string to the end of the file string that is coming into the Business Process. I am trying to do this in object script in studio and I am struggling to figure out how to add the string to the end of the other string. I am still new to studio and object script I have been reading up on the documentation and I am not sure what is the best way to accomplish this.
How do we trigger a BPL Business Process on a time schedule?
We are building a production that takes a steady stream of (HL7) lab results messages, processes them and stores them in a temporary database table. At scheduled points during the day (eg 0800, 1300, 1600) the database is queried and messages sent on to the downstream system. Aiming that the Processes to be implemented in BPL if possible - but we are having trouble triggering code in a BPL as a scheduled job.
The error does not happen when the response is < 163,280 chars. And when < 163,280 chars, it is a complete FHIR Bundle. Have anyone experienced this? If so, what is the resolution?
When implementing deferred response there was a problem initially with a few responses which meant we had blank jobs spawned somehow. How do you get rid. All the operation does is:
What are the pros and cons of developing a custom database driven routing engine vs. using the Ensemble standard routing engine. What I'm trying to accomplish with the custom routing engine is less manual intervention every time a new route is added. The con I can see with the custom engine is performance may lag behind the standard engine. My development vs. Intersystems essentially.
I am calling a business rule from one of my business processes and I noticed that when the business rule reports an error that the business process calling that rule just stops without any errors. Resultingly it fails to trigger the scope - catch-all construction that is surrounding the business rule. I know that it is possible to view the errors in business rules in the business rules log, but I really like to push an error message to Ens.Alert or something similar when my business rules report an error. How do I achieve that?
Created a business process and ticked "Is component".
Later trying to use it as component from another business process, and when trying to set up target for a call activity, selecting process components does not show anything in the list.
I am using the EnsLib.File.PassthroughService class in the business service, this business service will accept a text file from a location and pass it through to the BPL as a stream. I have been trying to work with the BPL in the GUI and I have been reading the documentation and trying to get it to work but I can not I continue to get errors and I am not sure why.
I will attach the Photos of what I have been trying, I think there is a problem with my call action because when I try and trace the message the context of the file does not even make it to the business operation.
I want to generate and return an http response based on the input of a http GET request. For my first steps I used an EnsLib.Http.GenericService, which uses an EnsLib.HTTP.InboundAdapter to receive requests like http://[my server]:[my-port]/some-path?ID=12345678.
I'm pretty new to ensemble.I'm working on a BPL process where I need to retrieve a result set from an SQL activity, loop over the results, and call a web service. I'm having trouble passing the request parameter(Labtype) into the SQL query for the WHERE condition .Can any one suggest how to loop over the result set as well.Any suggestions on how I can achieve it?
IRIS for UNIX (Red Hat Enterprise Linux 8 for x86-64) 2024.1 (Build 267_2U) Tue Apr 30 2024 16:06:39 EDT [HealthConnect:7.2.0-1.r1]
I have a use case where Epic is sending an A60 Allergy transaction is set at the Patient level, but we have a system called VIBE which needs the ADT at an Encounter level instead. Currently we store ADT information in a MS SQL database for years, and we are querying it to get the latest Account Number to insert into the ADT^A60 for VIBE.
I have a business service which is responsible for some batch operations with an SQL table. The process is generally slow but it is possible to scale the performance using multithreading and/or parallel processing and logical partitioning (postgres):
We're in the process of creating several courses for creating custom business components for productions. This includes custom business operations, BPL processes, and custom business services. Custom Business Operations and Custom Business Services are both aimed at software developers while BPL processes can be also be created by business analysts. What are some gotchas or best practices you've learned that you wish you knew when first building these components?
We'd love to include what you've learned into these courses so others can learn from them as well!
Hello, I am writing some cache code that will pick up a PDF file, Base64 encode the contents and then send on to a third party system within a Long String (via their API). I have been testing this and discovered that the PDFs do not open within the supplier system (I get an error saying that it hasn't been decoded correctly). I wanted to prove that the issue does not lie with the way that I have Base64 encoded it within Ensemble, and therefore as a test wanted to Encode the PDF stream, then decode the stream and write out to a new file.
I am trying to write a generic process that will take any incoming message but would like to know where it came from so in my code I would like to do something like this
If (Document.Source="some serviceorProcess").
Just to be clear in the route you get these features is there a way of accessing them in code
Hello, we have a couple of BPL processes. This works with a limited amount of messages but we run into issues when we process thousands of messages in a session. One BPL calls a Validation BPL process with async='False' and there is a response defined. The timeout is two seconds and that seems to be plenty of time for the validation process. I expected the calling process to wait for a response but that is not happening.
Hello, I want to show a fellow DC member how to convert JSON file into HL7 message. I personally do not work with HL7. I set up a production with EnsLib.File.PassthroughService. It passes Ens.StreamContainer to BPL process. I call a DTL to transform StreamContainer to HL7 message. I run into an error:
ERROR <Ens>ErrBPTerminated: Terminating BP JSON2HL7 # due to error: ERROR #5035: General exception Name 'Parsing error' Code '3' Data '' > ERROR #5035: General exception Name 'Parsing error' Code '3' Data ''
I'm working on a project where I retrieve RawHL7 message(ORU R01 2.3.1) content from a database in a BPL. I've created a context object of type Enslib.HL7.Message, and I need to populate it with the contents from the RawHL7 message so that I can use this context object as source for my DTL transformation.
Does anyone have suggestions on the best approach to achieve this? I'm looking for guidance on how to efficiently transfer the data from the RawHL7 message to the context object.
We have a business process that seems have extra jobs hanging around. This is what we see in the Jobs tab:
Only the bottom one is actually associated with a process. So what are those other ones? There are no queues and I have no way of finding out why they're there.
How do I correctly call a EnsLib.HL7.MsgRouter.RoutingEngine class from the BPL?I can successfully call the BPL from the EnsLib.HL7.Service.TCPService, and I have the BPL created to delay then call the rule. And I set the context and the result location.
I am creating a BPL using the Management Portal instead of creating a custom class.
As per the documentations 'request object' contains properties those were in the original request message object or primary request and can be reference using the dot syntax.
So if the primary request was an HL7 message, i should be able to pull the value MSH:9.2 as follow
request.{MSH:9.2} and assign it to a context property
I have a process that I am trying to duplicate from SQL Integration Services (SSIS) into Ensemble so that the rest of my team can help support any issues that may happen.
This particular job creates multiple dictionary files, but for each one of the dictionary files it creates, it also creates a control file that tells the vendor what to process.
Ensemble Business Process seems like red color but it still processing message successfully. I have checked log, events, queue everything is clear. there is no log info or error in the history. If BP is in red color in the sense might have some issues, but is still processing messages successfully.
By likes
.png)
.png)
.png)
.png)