DeadJobAlert: Job 'X478915' for config item 'Business  Service' was marked as 'dead' under ghost Id 'sys:ZX478915_6117'

This is the error message I get, but can you advice how can I start debugging this? I look at the jobs and I just see "dead" I cant see any information on the message itself.

I would appreciate if you could advice on how to start debugging such a job. Events are also non-informative.

Hi:

Sorry I can't find the correct documentation for this. It's very simple I think. 

I open up an XML reader class and correlate the XML to a message type. 

My XML will read something like 

<StatusLastChecked></StatusLastChecked>

This gets correlated into a message with the following property 

Property StatusLastChecked As %String(XMLPROJECTION = "element");

I can use the following to get the other properties out 

i.e. docs.RelayedDocuments.GetAt(i).DateAdded will get the date added properties

When i try for the one with the blank value for the blank entry with a trace I get undefined traced out 

d

Hi,

I have a HealthShare HealthConnect operation which uses the EnsLib.HTTP.OutboundAdapter. It is using a custom Operation class to send HTTP Post request. The request data that is sent to the operation and the response back from the operation is not  displayed on the visual trace. Is there anyway to display this data in the trace? 

Thank you for your help. 

Hello!

This may seem a bit strange, but I'd like to make a business operation which would put a file via SFTP and then confirm that the filesize on the remote server is consistent with expectations. I am thinking either of a custom copy or extension of the adapter (right now it is using EnsLib.FTP.OutboundAdapter) that overwrites method PutStream, or a version of the FTP.PassThroughOperation with a customized method OnMessage that does the check after the PutStream completes OK-- but I am uncertain of how exactly to modify either method to make the check.

Hi,

I have a production with a BS calling a BP calling another BP and so on and finally a BO. All calls are made using SendRequestSync.

The initial request is passed by value. The response is passed by ref and I allocate memory for it in the BO, hoping that it will go back to the initial caller in the BS, but it does not.

It looks like the following:

// In BS, do not allocate response, call BP1
Set tSC = SendRequestSync(request, .response)
// In BP1, call BP2. Now I don't know if .response is a reference to a reference
Set tSC = SendRequestSync(request, .response)
// In BP2, call BP3.

If you had the opportunity to change something in the IRIS Interoperability Message Viewer, what would you do?

Hello,

We would like some help:

We have found that in the following code:

Class Operaciones.SOAP.Gasometros.GestionPacientes.SeleneHL7Service Extends Ens.BusinessOperation [ ProcedureBlock ]
{

Method operacion(pRequest As Mensajes.Request.GestionPacientes.operacionRequest, Output pResponse As Mensajes.Response.GestionPacientes.operacionResponse) As %Library.Status
{
 Set ..Adapter.WebServiceClientClass = "WSCLIENTE.GestionPacientes.ConsultaCandidatos"
 Set MSH=pRequest.MSH,SFT=pRequest.SFT,QPD=pRequest.QPD,DSC=pRequest.DSC
 Set tSC =

Hello,

I am working on Ensemble 2017.2.1 .
I need to export my security settings into an extern database, in order to make a report.

I've created a Business Operation with an SQL Adapter into a Namespace, but I don't know how to get every security data from "%SYS" Namespace  ( SQLPrivileges , Resources , Roles , Services , Users ... ).

I dont't want to use the terminal and the ^SECURITY routine, because i don't want to store a XML file on the server.

I tried to create a method where I can use the (Security.System).ExportAll  command  in order to use the stream , but it doesn't work because the

I'm trying to tie IRIS (2019.1) into our Concord Fax cloud-based email-to-fax workflow. We have some sites that require a fax be sent to multiple locations based upon certain data (ie Radiology and Emergency departments). Unfortunately, CC-ing does not work with Concord Fax so I need a way to send the email, change the recipient, and then send it again if certain criteria are met. Is this possible? Do I need to duplicate and rename the method, calling the second one in the MessageMap?

Here's what my code currently looks like:

Hello,

I have a record map and batch class being passed to an EnsLib.RecordMap.Operation.BatchFileOperation.

They are designated as INFORMATION.FPL.Record and INFORMATION.FPL.Header

After reaching the operation it errors out with this message : ERROR <Ens>ErrGeneral: Quitting with error on Message body 5@INFORMATION.FPL.Record / 54 because Status 'ERROR <EnsRecordMap>ErrNoBatchParent: Record with class 'INFORMATION.FPL.Record' and Id '54' doesn't belong to a batch' matched ReplyCodeAction 1 : 'E=F' resulting in Action code F

Some screen grabs are attached of my configuration.

Any help is

I am working on a BPL to take data from a MS SQL database and create an HL7 Materials Message for our EMR.  I have done this plenty of times in the past however I am running into an error.

"Remote Gateway Error: JDBC Gateway SP execute(0) error 0: Access to the remote server is denied because no login-mapping exists."

What is confusing is that this BPL doesn't differ from any of my other BPLs in connecting to MS SQL Server. I know I am missing something..

This BPL will execute the 1st Stored Procedure without any issues, the issue is when it comes to executing the second stored procedure.

Any

This series of articles would cover Python Gateway for InterSystems Data Platforms. Execute Python code and more from InterSystems IRIS. This project brings you the power of Python right into your InterSystems IRIS environment:

• Execute arbitrary Python code
• Seamlessly transfer data from InterSystems IRIS into Python
• Build intelligent Interoperability business processes with Python Interoperability Adapter
• Save, examine, modify and restore Python context from InterSystems IRIS

Other articles

The plan for the series so far (subject to change).

• Part I: Overview, Landscape, and Introduction
• Part

Hello,

I work with Ensemble Business Operation with SQL Outbound Adapter. I try to query a DSN defined database that happens to be Cache on the same machine in the same instance of Healthshare 2017.1.3. This worked fine on Linux server when I used JDBC driver. Now I want to run it on my Windows 10 laptop. I set up DSN and I can test connection successfully. I provided DSN in Operation DSN setting and I tried with and without Credential. I get ERROR <Ensd>ErrOutConnectFailed: ODBC Connect failed for 'myDSN'  / 'myDSN' with error ERROR #6022: Gateway failed: DSN/User Connect.

I tried to set up

Hello,
I loaded a WSDL from a webservice into my project where executing it returns me a series of Orders related.
My problem is that the provider of this webservice sometimes adds new fields, which I don't even use, and from then on it starts giving Iris a bug, so I need to import the updated WSDL again so that it creates the new property that the provideradded.

Is there a way for me to set up after the first WSDL import so that it ignores if the provider makes a response schema change by adding 1 new field for example, and I always keep working with the first structure I imported functionally?

This article will provide tips and tricks on customizing Ensemble business hosts with configurable settings.

Ensemble production Settings are configurable values that control the behavior of a production and its hosts.

The documentation for adding and removing Settings and specifying categories and controls for Settings is provided at the link:

http://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY=EGDV_prog#EGDV_prog_settings

“To provide new settings for a production, a business host, or an adapter, modify its class definition as follows:

1. Add a property for each configuration

Hi, I’m trying to setup a Business Operation where the Property is a drop down list of Strings.  I was able to produce the desired effect but only using a hard coded list like Property LookupProp As %String(VALUELIST = ",value1,value2").  Instead I would like it to be populated from lookup table so I created a method to use SQL to fetch the result set from a Lookup table and then return it as the desired string. But doesn't allow me to do declare the property using the method like this: Property LookupProp As %String(VALUELIST = ##class(MyClass).GetLookupValues());

ClassMethod GetLookupValues()

I have BPL BP and BO.

To call BO I need to populate the stream property of the request message.

What's the best way to do it?

From inside Business Service (OnProcessInput method specifically) I want to determine if Ensemble tries to shut down the job.

Is it possible? How?

I'm having trouble accessing the snapshots  EnsLib.SQL.Snapshot in %Library.ListOfObjects that are returned from method ExecuteProcedure in EnsLib.SQL.OutboundAdapter.  The Microsoft SQL stored procedure I am executing returns multiple resultsets.

The issue I am having is that my code works fine when executed in the business operation (commented out in the code below) but when it is executed in the business process it errors.  Any ideas as to why this happens?  The error I get is:

> ERROR #5002: Cache error: <METHOD DOES NOT EXIST>zGetAt+5 ^%Library.ListOfObjects.1

Hello,

Working on to learn very basic CUSTOM Business Service which sends to a EnsLib.File.PassthroughOperation.

But operation is not writing to File and erroring out (No Stream contained in StreamContainer Request")'.

How do convert the object to STREAM and wrap in the StreamContainer so the operation does not error and write to a file.

Thanks.

Persistent Class

Class Hospital.PatientApptRequest Extends %Persistent
{
Property PatientId As %Stream.FileCharacter;
Property PatientName As %Stream.FileCharacter;
..

Custom Service reads from a file

Method OnProcessInput(pInput As %FileCharacterStream, Outpu

Hi all, My first post. I hope I have created it correctly.

Our team is looking to increase the number of characters in our Ensemble 'Categories' for Services, Processes and operations.

We are doing this to better identify things like Vendor, Message type and integrated application names...

One of our team members thought his might increase processing overhead and a discussion ensued that was not resolved.

my thoughts...

1- If we are just looking at message throughput time then the number of characters or number of category 'entries' on one of these configurable items should not matter,,,  should

In my production I receive an  XLFO stream and I would like to pass that to the FOP pdf rendering engine to produce pdf files .So far in my research that can be achieved through ZEN .I would like to create an operation that will take advantage of that and be able to pass my XLFO stream  to the operation and create pdf files I found something similar  here but for some reasons I get errors like below if any one understands what they mean please advice or someone  who had to do something similar advice on how to achieve this thanks in advance

0Error rendering: OS code=1 Use $LOG=1 to check•

I have several business operations that are all pointed to the same http server. Is there a way to set the http server within some sort of properties file or within the objectscript code? I want to be able to set the http server setting once rather than for every business operation. Any advice on how to go about doing this would be appreciated.

Hi

I wish to use outlook.office365.com to send emails from an Ensemble production and require assistance on how to configure SSL for the connection

Nigel Salm

I am trying to create a URL for Spoke Mobile to page users when our email system is down and we can't use the normal email alerts.

I was directed to http://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY=EHTTP_outbound and tried to create something.  The best I got was a response from the webpage that told me there was an error.

I want to be able to have a default pager number when we don't have an oncall schedule and grab information from Ens.AlertMessage.

I thought this would work:

Class User.NewClass21 Extends Ens.BusinessOperation
{
Parameter ADAPTER = "EnsLib.HTTP.OutboundAdap

Hi, We recover a large amount of data from an external database (SQLServer, about 1 million rows in JDBC).
However, we have treatment time issue.
This process takes more than 30 minutes whereas on a "classic" SQL Server Management Studio type request takes less than a minute.

While searching on the internet, I came across this article: http://makejavafaster.blogspot.com/2015/06/jdbc-fetch-size-performance.html
It explains how in Java, we can tweak the FetchSize parameter of the JDBC driver to optimize this kind of process.

Is there a way to access this JDBC parameter through the EnsLib.SQL.Outbound

I am trying to base64 encode a string with non standard characters encoded in utf-8 also tried windows 1252  and I am getting error like so 

ERROR <Ens>ErrException: <ILLEGAL VALUE>zEncodeStream+18^ -- logged as '-' number - @' set encString = $TRANSLATE($SYSTEM.Encryption.Base64Encode(streamString),$C(10,13))' 

any help appreciated if anyone has faced this before

Hi dev community,

I am currently working on a project to send documents to a RESTful based API that supports bearer 
Token Authorization.

When we try to fire a JSON request from our EnsLib.Rest.Operation towards the 3rd party API with a 
valid Token we keep receiving Authorization Error codes HTTP 401 back.

If we use the same request and same Token from a test utility such as Postman the request is 
successful and we are able to move past the authorization stage.

We are inputting the Token in the header of the HTTP request as specified by the 3rd party API 
specification.

Hi

We have just completed a migration of a test environment from Ensemble 2012 to Ensemble 2017 on a new server. This is the last in a series of migrations but the first to encounter this particular issue. All web clients making SOAP requests to a particular external web service are receiving a fault that states:

The SOAP action specified on the message, '', does not match the HTTP SOAP Action, 'http://<expected target service action follows here>'.

Further investigation using ^ISCSOAP and a comparison with other working environments reveals that the SOAP request is completely missing the

I am having an intermittent issue that when I make a call to MSSQL from a BPL that the response does not come back in the amount of time required. Since the call from the BPL is synchronous I tried changing the timeout to 60 but it has not helped (see below). Is there anyway to guarantee that the call waits long enough for a response before continuing on?

Thanks

Scott Roth