Trying to make some scripts to do some IRIS initialization during startup, I noticed that iris start and particularly stop takes too much time, and it starts to many processes in the background.

nostu is mostly useless for system initialization but could help in some scenarios, such as setup passwords, but it is still too slow

irisowner@4ea1bfb50b7f:~$ time iris start iris nostu
Starting IRIS
Using 'iris.cpf' configuration file

Starting Control Process
Global buffer setting requires attention.  Auto-selected 25% of total memory.
Allocated 7417MB shared memory
6002MB global buffers, 600MB routine buffers
Creating a WIJ file to hold 99 megabytes of data
InterSystems IRIS is started in single user mode.
To log into InterSystems IRIS, type:
    iris session IRIS -B

real    0m0.513s
user    0m0.090s
sys     0m0.207s

For instance, I have no idea why it starts so many AUX processes, even during NOSTU. With a normal start with no extra volumes attached, just plain start, I see no reasons to have so many AUX processes as well.

2011 pts/0    S      0:00 /usr/irissys/bin/irisdb -s/usr/irissys/mgr/ -w/usr/irissys/mgr/ -cc -B -Enostu -C/usr/irissys/iris.cpf*IRIS
 2052 pts/0    S      0:00 /usr/irissys/bin/irisdb WD                                                                                 
 2053 pts/0    S      0:00 /usr/irissys/bin/irisdb GC                                                                                 
 2054 pts/0    S      0:00 /usr/irissys/bin/irisdb JD                                                                                 
 2055 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX2                                                                               
 2056 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX1                                                                               
 2057 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX5                                                                               
 2058 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX7                                                                               
 2059 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX4                                                                               
 2060 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX3                                                                               
 2061 pts/0    S      0:00 /usr/irissys/bin/irisdb AUX6                                                                               
 2062 pts/0    S      0:00 /usr/irissys/bin/irisdb DBXD

1 0
1 574

Hi,

I am trying to input an entire xml into a sql server table. I am doing this via an operation in Ensemble.

I keep getting the following error

[SQL Server]XML parsing: line 0, character 0, unrecognized input signature

I have setup the table with a column parameter XML.

Here is the request object that is being sent to the store procedure

0 0
0 477
Question
· Nov 30, 2022
Unable to print from Edge

Hi Guys,

Our clients are running Zen pages from Internet explorer and able to print with no issues but since they upgraded to Edge the can't print anymore, the user can select the printer from the listbox but it says "Printer Unavailable" ?

so far they installed MSDWebCient.msi and also set Edge to run in IE mode following these steps :

0 0
1 460

We've implemented SAML authentication for our application where we are the service provider and various other entities are the identity providers. We've done successful connections with several identity providers including Okta, Duo Mobile, Ping Identity, and Azure. Validating the SAML response with signed assertions has been working great. Now, I am trying implement support for the SAML assertions in the response being encrypted for a new identity provider and struggling to understand procedurally how to go about this.

0 0
0 418

Hi InterSystems Community

We recently had an issue where we weren't able to parse a JSON HTTP request, but the issue went by unnoticed. We also did not have a trace of what the raw HTTP request was that we couldn't parse. I'm looking at improving our this by:
Tracing the raw request using $$$TRACE

Raising an alert which will hit our Ens.Alert router which will compose and send an email

1 0
1 322
Question
· Mar 21, 2023
Logging FTP Business Service

I am having an issue with a file not being deleted from the FTP server and returning an error to this effect. The file, however, was fully processed. This causes the file to process again.

My question is I seem to recall a flag that can be set to enable more detailed tracing to be done on the FTP service/adapter. However, I have not been able to locate this. Does anyone recall such a logging setting or was I just dreaming?

0 0
0 300

Hello, I am using the power bi report builder tool to create a report with dynamic parameters. Every time I try to create and apply a parameter in power bi query editor. I get the below listed error message.

FYI: I have created a Data source connection using "InterSystems ODBC" Version 2015.01.00.429. I am getting data without any issue.

Query: select Payment_History.OCCURENCE_DATE from Payment_History where Payment_History.OCCURENCE_DATE >= @BeginDate

0 0
0 276

Hello,

Our team is working on building dashboard for internal reference and monitoring.

We would like to have details like Interface Name, Current Status, Last Messages Processed at, IP & Port, Serve/Instance/Production Environment name etc.

If there is any built-in service which we can utilize or any pre-compiled code that we can utilize to build such dashboard.

At this moment want to keep it basic, but moving forward will enhance with more advance features.

Please suggest, any help will be appreciated.

Thanks,

Yash

0 0
0 275

Hello,

I have a question regarding the Intersystems Caché Database and its jdbc driver. I need to set the connection timeout for the database, but I couldn't find any documentation stating that the jdbc driver for Caché supports setting the connection timeout. However, I noticed that the jdbc driver for the Intersystems Iris Database appears to support this feature.

My question is, can I use the Iris jdbc driver to set the connection timeout for the Caché Database?

The jdbc driver I use: cache-jdbc-2.0.0.jar

0 0
0 274

Good morning,

First of all, thank you very much in advance for reading and responding.

Also, thank you for any support, because it is a relief, support, contribution, help to have people with more understanding, knowledge and practice, reading, and thinking this doubt.

There is the following need:

Two 2 circuits are available:

1st DICOM Circuit of "Studio" ( Classic Service ).

Service: class: DICOM.BS.QueryService

Process: class: DICOM.BP.QueryProcess

0 0
0 261

Good morning,

We would like to share with you a doubt, and we would appreciate if you could read and answer us.

Currently we have a file titled: "Imagen PatientID 9358340 PatientName Milagros ReasonForStudy 350290 InstitutionName 350290 StudyDate 20220927.xml" , in which we have the following InstitutionName:

<DicomAttribute keyword="InstitutionName" tag="00080080" vr="LO">
<Value number="1">350290</Value>
</DicomAttribute>

0 0
0 241