Hi community

i'm working on the validation user method , i found this following  code in the  \HSIE\%SYS\Classes\%OAuth2\Server\Validate.cls  

    // Check if user is defined.    // We use local Cache user list as the shipped default.

InterSystems is pleased to announce the availability of the following maintenance releases:

• Caché and Ensemble 2016.2.3
• HealthShare Health Connect v15.021 on core technology 2016.2.3

Caché and Ensemble 2016.2.3 are available on the same platforms as 2016.2.2

The full list of corrections can be found in the release notes.

• The version number of these releases is 2016.2.3.903.0
• For complete platform details, please refer to the 2016.2 Supported Platforms document.

HealthShare Health Connect v15.021 for core technology 2016.2.3.903.0 contains the following HealthShare module:

• Core:

This should be an overview over a subject that pops up over several places in online documentation mostly as remarks and never as dedicated chapter.

Once upon a time ...  No it's not a fairy tale.
In the beginning of Caché (and before) you had your partition to run your code. Part of that partition was a space with all your local variables nicely sorted by %,A,..Z,a,...z

And whatever values or information you had to store locally was there and visible and available to any piece of code running  in your partition.

I am trying to make Caché perform certain actions depending on whether a particular property of the object was changed using triggers.

For example, say I have this class:

    // ...

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

Today, you need to make a compiler for the language assembunny.
Luckily, this language has only 4 instructions :

cpy x y copies x (either an integer or the value of a register) into register y.
inc x increases the value of register x by one.
dec x decreases the value of register x by one.
jnz x y jumps to an instruction y away (positive means forward; negative means backward), but only if x

Hi, Community!

We introduced new tags for the posts:

Terminal and OAuth2.

See the full list of tags.

Leave your requests for other new tags to introduce.

Does anyone know where to find a cache.node that works with Cache version 2016.1.1.108.0? I am currently getting  this:

Error: Unable to load shared library C:\InterSystems\TryCache\bin\cache.node''

I am using Windows 7 Pro + SP1.

Thanks!

I would like to remove all the active locks and roll back all the on-going transactions.

Is there any COS command I could use?

By the way, any command I could see the current on-going locks and transactions?

Thanks.

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The challenge today is about microchips and generators. A microchip belongs to one particular generator, and the two can be on the same floor, or in the same elevator. But if a microchip is with another generator on the same floor or elevator, it will get toasted, except if his own generator is also on the same floor/elevator.
The elevator has only room for two items (can be mix of

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

In today's challenge, you have to execute instructions that control how bots are handling microchips.

The input contain instructions that can be something like this :

value 5 goes to bot 2
bot 2 gives low to bot 1 and high to bot 0
value 3 goes to bot 1
bot 1 gives low to output 1 and high to bot 0
bot 0 gives low to output 2 and high to output 0
value 2 goes to bot 2

Initially, bot 1

Using the CSP Page Statistics

Application Performance Management

Introduction

A key part of Application Performance Management (APM) is recording the activity and performance of user activity. For many web applications the closest you can get to this is to record the CSP pages or CSP based services being dispatched.

If the pages or service names are meaningful and they indicate the business activity being performed the CSP page statistics can be very useful in building up a historical record of activity, performance and resource usage.

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

Today's challenge is about decompressing input that is compressed in an experimental format.
In the format, markers indicate how much time a number of characters need to be repeated.

For example :

A(1x5)BC repeats only the B a total of 5 times, becoming ABBBBBC for a decompressed length of 7.
(3x3)XYZ becomes XYZXYZXYZ for a decompressed length of 9.
A(2x2)BCD(2x2)EFG doubles the BC and EF,

I have a Cache-compatible sql script file and each query is separate by white space.

How could I ask Cache to execute all the queries in this file and dump the result to a specified file?

Thanks.

I have Ensemble/Healthshare running in a production environment which is setup with a mirror failover and an arbiter sitting between them.

In the event of a failover we have a number of connections that need stopping/monitoring and starting in a certain order.

Is there a programmatic way we can detect the failover and stop certain services and operations immediately and then start them up again in the required order, checking their connection state before starting the next connection.

I am thinking Ens.Director is probably what I need however I need some guidance on how to implement a solution.

Hello, I'm looking for books on Caché / Ensemble.

I'm new and would like to learn more about native functions.

Thank you

Hello All,

what is the best method for search a portion of text in a non-indexed global?

I need to implement an autocomplete kind of search, in a global of >1M registers (text type, not $lb)

Maybe the best way would be use a SQL mapped class, with 'Bitmap' indexes?

Thanks in advance!

Hello,

Sorry for my epic english :(

I have a strange issue.

I have generated an encryption key with the tool (UI.Portal.EncryptionCreate.zen).

Then  I activate my key for data encryption (UI.Portal.EncryptionManaged) and encryption work fine.

But when I reboot my server the key is removed from the data encryption key list (UI.Portal.EncryptionManaged) and I have to re-activate the key.

Perhaps somebody have an idee ?

Cache version : Cache for Windows (x86-64) 2016.2.2 (Build 853U)

Windows: Windows Server 2012 R2 Standard

Thanks

Sébastien

So this may sound trivial, but I'm seeing conflicting information on this topic and hoping to get clarification.

According to Enslib.HL7.Message class definition, the maxlength of RawContent is 10,000 characters. So when using encoding like UTF-8, that is 10KB. When using Unicode, that should then be 20KB.

But then also coming across some forums and documents where 32KB is maximum size before HL7 fields are truncated.

What is the sure way to determine and modify an interface's maximum supported message size?

Hi all, This is a bit embarrassing, and not that critical.  I have a local instance of Caché 2016 on my computer, for playing around with.  I was attempting to set up two-factor authentication on this instance, and I thought I simply disabled all users except for my own user and enabled two-factor for this user.  The next time I tried to login to the Management portal, I received a Server Availability Error:

http://localhost:57772/csp/sys/UtilHome.csp

Caché Server Pages Version 2016.1.1.107.0

Server Availability Error

Server is currently unavailable

I can login to the terminal successfully, and

I thought there used to be some code in the manuals to do this couldn't find it in my latest release manuals. In other words, turn prod data into test data.

I am using a %GlobalStream to create as % stream.Object and writing that to a file but for some reason when I run that on the terminal I get <PARAMETER>zWrite^%Library.GlobalCharacterStream.1 and no file is created

I have tried the following here is my code and still get the same result  any help  appreciated

ClassMethod WriteNodes(myfile As %String){
  set status=##class(%XML.TextReader).ParseFile(myfile,.textreader)

  set ptemp=##class(%GlobalCharacterStream).%New()
  //check status
  if $$$ISERR(status) {do $System.Status.DisplayError(status) quit}
  //iterate through document, node

I have a DTL that reads an xml file and I want transform that to a list of objects but I have a problem looping through my xml as when I try I get the first instance on the xml not the whole XML being transformed. here is my example. Here is the output

<s01:WardOccupancy>
<s01:WardOccupancy>
<Organisation>BYG</Organisation>
</s01:WardOccupancy>
</s01:WardOccupancy>
</msg>

from

<Message>
  <Record>
    <OrganisationCode>BYG</OrganisationCode>
  </Record>
  <Record>
    <OrganisationCode>BYG</OrganisationCode>
  </Record>
  <Record>
    <OrganisationCode>BYG</OrganisationCode>

Hi Developer community

Does anyone know where the custom message filters for the message browser live? You can load and save by name and existing filters appear in a list.  I want to export them from an existing production and import then into a new one.

Thanks in advance

MikeD

Hi, Community!

We are having InterSystems Developer Meetup tomorrow 25th of October in CIC.

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : goto to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The input in today's challenge consists of an encrypted name, a dash, a sectorID, a dash and a checksum between brackets.
A name is real if the checksum is equal to the five most common letters in the encypted name.

For example : 
aaaaa-bbb-z-y-x-123[abxyz] is a real name because the most common 5 leters are a,b,x,y,z (sorted by numer of occurences and alphabetically)

The challenge is to output

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : goto to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The challenge of day 5 is to calculate a password of 8 characters by finding the MD5 hash of the input and an increasing integer index.
The password is constructed by taking the 6th character of the first 8 hashes that start with 5 zeroes (in hex representation).

For example : if the input would be 'abc', the first hash that has 5 zeroes would be by MD5 hashing abc3231929 : the hex

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : goto to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

In today's challenge, you have to repair the communication with Santa : messages are coming in, but jammed.
By using repetition code (see also https://en.wikipedia.org/wiki/Repetition_code), you can find out what's in the message : by sending the same message a number of times, you can calculate which characters are most frequent on each position and find the most likely message.

For example,

Hi, team

i configure my authorization server and client and i want define access rights  for different users , how can i do it?

knowing that  we have our own database with different users ID and access privilege ?

is there any one who can help us? thank's

This is a series of programming challenges for beginners and experienced Caché programmers.

For an introduction : go to article https://community.intersystems.com/post/advent-code-2016-day1-no-time-t…

The challenge of today has nothing to do with real two-factor authentication ! (sorry if you came to this article by searching the real thing)

For the complete explanation of the challenge, go to http://adventofcode.com/2016/day/8.

Your input (http://adventofcode.com/2016/day/8/input) consists of a series of three basic instructions to control the display of a screen.
The goal of the first part

Is there documentation that states %Id() is supposed to be available in %OnBeforeSave()?

I am currently using it in this method without issues, but one of my colleagues is stating it is not supposed to be available for a new object at this point because the object has not been saved yet.