Please excuse my ignorance. I am trying to identify what areas would be best to review in the System Dashboard (for Cache 2010.2) for performance issues with the database. It seems to be running slower than usual, but I am trying to find out the best way to go about identifying what the issue is.

The following are captures from the System Dashboard.

As always, thanks a lot for your help.

System Dashboard

2 3
0 568

In the context of IKO (Iris Kubernetes Operator) the question of Service not redirecting dynamically to the correct Pod is still pending.
In production this can be dangerous since an overload (or any other simpler problem) can cause you to change the main Pod and leave the application inoperable until we intervene.

Intersystems support warned that this is still an issue of IKO, but there are some possibilities that I am studying.

To explore an idea I had, I would like the help of this Forum to answer the following question:

0 3
0 260

This post will guide you through the process of sizing shared memory requirements for database applications running on InterSystems data platforms. It will cover key aspects such as global and routine buffers, gmheap, and locksize, providing you with a comprehensive understanding. Additionally, it will offer performance tips for configuring servers and virtualizing IRIS applications. Please note that when I refer to IRIS, I include all the data platforms (Ensemble, HealthShare, iKnow, Caché, and IRIS).

30 3
8 10.4K

Introduction

InterSystems has recently completed a performance and scalability benchmark of IRIS for Health 2020.1, focusing on HL7 version 2 interoperability. This article describes the observed throughput for various workloads, and also provides general configuration and sizing guidelines for systems where IRIS for Health is used as an interoperability engine for HL7v2 messaging.

6 3
3 1.6K

We are seeing more and more customers being lured with latest infrastructure technologies, particularly Composable Infrastructure. Coming with all sorts of data center consolidations and costs savings.

Question is: are there any concerns for HealthShare/TrakCare being run on these platforms or things to look out for? Anyone out there, already on these platforms?

To be more specific this is HPe Synergy with 480 Compute blades booting as bare metal.

Regards;

Anzelem.

0 3
0 253

Hi all.

A long time ago I enabled Activity Monitoring to be able to save myself headaches in the future when looking at the performance of various message routes through our productions. It's served it's purpose of answering questions on how many messages we process a week etc but I had not had the chance to really dig down into the stats for specific message types or destinations to pin point issues.

0 3
0 265

Hello everyone!

Some time ago, I changed the configuration in SQL Runtime Statistic to "Turn on Stats code generation to gather stats at the Open and Close of a query". With this change, the CACHE base (cache/mgr/cache/) has grown a lot to reach 198GB.

Yesterday, I returned the configuration of SQL Runtime Statistic to the default which is "Turn off Stats code generation" and the cache base is no longer growing.

My question is?

0 3
0 193

APM normally focuses on the activity of the application but gathering information about system usage gives you important background information that helps understand and manage the performance of your application so I am including the IRIS History Monitor in this series.

In this article I will briefly describe how you start the IRIS or Caché History Monitor to build a record of the system level activity to go with the application activity and performance information you gather. I will also give examples of SQL to access the information.

6 3
2 1.7K
Question
· Sep 13, 2021
SQL - use specific index

Hello Community,

we want to use a specific index on our sql-class.

The index we want to use is called "iFilter".
Currently we use the following technique of ignoring all other indices because the automatically chosen index is always too slow.

0 3
1 297
Question
· Aug 10, 2018
using Microsoft diskspd

Hi,

Has anyone got any experience of using the Microsoft diskspd utility to test the storage infrastructure in Healthshare/Ensemble environment.

I am interested in getting some figures to highlight any issues with different approaches to provisioning the disks on our new environment.

I am at a loss as to what parameters I should use to give a reasonable synthetic load that will give me any indication of potential issues. Any pointers would be greatly appreciated!

Kind Regards,

Jason

0 3
0 330

I would like to know if an encrypted caché database can run significantly slower than a normal "unencrypted" database, in a way that is noticeable to the end user (e.g. slower response time for most pages, especially the ones that rely on read/writing to globals).

I searched in Intersystems knowledge base and couldn't find anything related. I'm looking for possible before/after benchmarks.

0 3
0 292

Continuing on with providing some examples of various storage technologies and their performance profiles, this time we looked at the growing trend of leveraging internal commodity-based server storage, specifically the new HPE Cloudline 3150 Gen10 AMD processor-based single socket servers with two 3.2TB Samsung PM1725a NVMe drives.

4 2
0 1.3K

Is there a difference in outcome between the two screengrabs below?

In both cases, when certain conditions are met, a transformation is called and the output sent on to two targets. In the first case we surmise the transformation is called twice, and the output of the first run sent to the first target, the output of the second run to the second target. In the second case we surmise the transformation is called once, and the output duplicated and sent to the two targets.

1 2
0 200

Here is a snippet that I learned yesterday

You can define an index on a collection property but when I tried to use it, I failed. I was using

     Select ….. where …. :xx %INLIST collproperty

But this will not use an index, but the equivalent syntax

     SELECT .. WHERE ... FOR SOME %ELEMENT(collproperty) (%VALUE=:xx)

will use the index

Check out

http://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY=...

1 2
1 340

A short post for now to answer a question that came up. In post two of this series I included graphs of performance data extracted from pButtons. I was asked off-line if there is a quicker way than cut/paste to extract metrics for mgstat etc from a pButtons .html file for easy charting in Excel.

See: - Part 2 - Looking at the metrics we collected

7 2
0 1.5K

[Background]

InterSystems IRIS family has a nice utility ^SystemPerformance (as known as ^pButtons in Caché and Ensemble) which outputs the database performance information into a readable HTML file. When you run ^SystemPerformance on IRIS for Windows, a HTML file is created where both our own performance log mgstat and Windows performance log are included.

12 2
4 618

While I can see the benefits that $ZSTORAGE could have if used properly, I have not seen it used in the environments I have worked in. I was wondering if there are any developers that promote its usage.

If used properly, I would imagine it could be highly effective in maximizing free memory since some processes will never go over X amount, while others may very well need much more.

0 2
0 378

I am designing the software architecture for an Ensemble/Healthshare production to be deployed on Amazon AWS EC2 servers (2 mirrored m4.large - 4 vCPUs / 16 GiB RAM running RedHat Linux 3.10.0-327.el7.x86_64 and Healthshare for RHEL 64-bit 2016.2.1). It's a rather CPU-intensive production involving massive XSLT 2.0 transformations (massive both in terms of size and volume). I was wondering if anyone has experience configuring Ensemble productions on EC2 servers. My question or concern has to do with the following statement in the Ensemble documentation:

0 2
0 792

I have been asked to assist in the planning of the a new server for our database, which we will be changing operating systems from OpenVMS to Linux (RedHat distribution). However, its difficult to find material regarding what would be recommended, which is likely due to the database being proprietary.

In looking at the information provided below and hoping to decrease processing time, would anyone be able to recommend type of configuration we should have for the new Linux server? Please feel free to ask any clarifying questions.

0 2
0 1.4K

A few years ago, I was teaching the basics of our %UnitTest framework during Caché Foundations class (now called Developing Using InterSystems Objects and SQL). A student asked if it was possible to collect performance statistics while running unit tests. A few weeks later, I added some additional code to the %UnitTest examples to answer this question. I’m finally sharing it on the Community.

5 2
2 611

Hello everyone,

Recently, I've been working on a Business Process that processes a large JSON FHIR message containing up to 50k requests in an array within the JSON.

Currently, the code imports the JSON as a dynamic object from the original message stream, obtains an iterator from it, and processes each request one at a time in a loop.

0 2
0 286