Hello,

We have a Service which behaves differently even though two equal Soap UI XML requests are being sent, from different systems.

When it is being sent from the other system, our Service's log shows:


ERROR <Ens>ErrGeneral: invalid HTTP version'xmlns:ges="http://XXX.XXXXXXXXX/GestionPacientes">'

When we send the same XML message from SoapUI, it is being processed by our system.

0 1
0 497

Morning everyone,

I would appreciate some advice please- hopefully there is plenty of experts out there.

We are setting up an sFTP share between hospital trusts here in the UK and I have set the outbound operation up using a custom extension of EnsLib.HL7.Operation.FTPOperation.

We are configuring a VPN tunnel to run between the sites also so there is a bit of firewall / network routing to take place to enable the connection but to add in a complication we are on a mirrored cluster and usually present on a Virtual IP address.

0 2
0 497
Question
· Feb 17, 2021
Detect Hung IRIS Instance

Is there an API that can be used to remotely fetch the state of an IRIS instance similar to what is reported with "iris list"? Specifically, I'm looking to be able to remotely detect when an IRIS instance is in "hung" state.

I know there is the "iris_system_state" metric that I can consume in Grafana, but I found that when our system was in a "hung" state, there was just no data for that metric and I'd think if you alert on that, you cannot be sure if the IRIS system is down or hung or there's just an issue with prometheus fetching stats from IRIS.

0 1
0 497

If I add the same patient data with a different unique ID then it inserts as new data using a POST request.
So, In the FHIR server How can I prevent this kind of thing by using POST requests?
Note:- I don't want to use a PUT request for the same. The main thing is I want to get a unique patient record.
Que:- Is there any way to check data duplication on each FHIR resource?

Thanks & Regards,

Harshdeep Acharya

0 1
0 496

Good morning. Perhaps someone can tell me if this IRIS health communit version (IRISHealth_Community-2022.1.0.209.0-lnxubuntu2004x64) is supposed

to work in an Ubuntu 20.04 LTS installation in an Oracle Virtual Box .

I am trying to install different versions on Ubuntu . I tried with the 18 version. No luck. Than I've tried with the 20.04 version. No luck either.

The error I am having now is below

///////////////////////// error message from the install ////////////////////////////////

0 3
0 493

Hi All,

When resending HL7 messages out, the receiving system rejects the message indicating the "Message Control ID already exists" (see error below). Iris retries resending the same message until the receiving system crashes and the BO disconnects in Iris. I would like to suspend the message when Iris receives that error and move on to the next message. Is this possible? Can it be handled by the BO Reply Code Actions settings? What reply code actions should I use?

0 4
0 492

While I can query the HL7 message class EnsLib.HL7.Message (EnsLib_HL7.Message for SQL) to my heart's content in the SQL Shell or the Management Portal's SQL page, I can't seem to SELECT anything other than ID/%Id from an ADO/ODBC client. Properties such as TimeCreated, Name, MessageTypeCategory, etc. all seem to prevent the query from ever completing EXCEPT when I provide the ID as part of the WHERE criteria.

This works fine in the Management Portal and Shell:

0 7
0 491
Question
· Aug 15, 2022
Security Scans

We are looking for a 3rd party application that can scan our IRIS based Cache Object Script code for vulnerabilities or coding weaknesses. There are many, many applications/vendors out there that do code scanning but none seem to support Cache Object Script or scanning the IRIS environment. If anyone is aware of a company/product that can scan our code / IRIS environment, I would love to hear about it.

Thanks in advance for the help.

Mike

0 3
0 483

My original ZAUTHENTICATE.mac to use Delegated sign on did not include GetCredentials(), however I am being told it probably should have it so I am eliminate an error I am seeing when trying to troubleshoot the ZAUTHENTICATION. I am trying to add the GetCredentials() from the documentation to the existing ZAUTHENTICATE.mac but I am getting an error

0 7
0 477

We have a situation where we want to save the patient photo (or any other attachment) received via FHIR to a persistent property without decoding it. When it is sent out again using FHIR is is stored in the encoded format and need not be encoded. We do not need to decode it for our application. We always use it on another system that retrieves it or saves it via FHIR and therefore it is always received or sent embedded in JSON.

0 1
0 475

Hello,

I'm using CircleCI to spin up the image `store/intersystems/irishealth-community:2021.2.0.649.0`.

When building the application we are getting messages that say:

ERROR #5373: Class 'EnsLib.HL7.Message', used by 'Package.Class', does not exist
Skip class Package.Class

Other missing classes seem to include, but not limited to:

Ens.BusinessProcessBPL
Ens.BusinessService
EnsLib.RecordMap.ComplexChild
EnsLib.EDI.XML.Document
Ens.Request

0 19
0 475

Hi All,

We're doing our first babysteps with embedded Python and IRIS with an interoperability solution. We want to convert a CSV file to an Excel xlt file.

As service we've got a EnsLib.File.PassthroughService which picks up a csv file

As operation we've got a EnsLib.File.PassthroughOperation which writes the Excel file.

In the middle:

We've created an Business Process with an %Stream.GlobalCharacter in the Request and a %Stream.GlobalCharacter in the Response.

1 3
0 475

Hi,

An exception occurs randomly.
I expect the value of ^TEST to be 20, but it's not.
Did i miss something like closing, flush the stream or locking the global?

Exception

%SaveData+15^%Stream.GlobalCharacter.1×PRAX1Í+^%SaveData+15^%Stream.GlobalCharacter.1^1)e^%SerializeObject+6^%Stream.Object.1^2e^%Save+9^%Stream.Object.1^93e^zCopyFromAndSave+58^%Stream.GlobalCharacter.1^1e^test+11^ry^1e^test+3^ry^4d^^^0

Testcode

0 13
0 472

Hi,

I'm very new to InterSystems Health Connect so may be doing something silly...

I'm trying to link to an Oracle DB view using the Link Table Wizard in the Management Portal. The wizard finds the view, but when I select it and click the 'next' button I get an error on the 'Select Columns' screen: 'ERROR #5534: Columns error' (and no columns show in the wizard). I've tried on several views and tables in the same DB but keep hitting the same error.

0 2
0 469

What are other's thoughts, opinions and experiences going from CSP to RESTful services, specifically when it comes to reusing code in CSP files?

One could define a method in CSP as follows:

<script language="cache" method="SubmitSomethingAwesome" arguments="aswesomeId:%Numeric">

And it's generated in csp.mycsppage.cls ascsp.mycsppage.SubmitSomethingAwesome(awesomeId as %Numeric).

Have people had success defining there rest call by calling the generated CSP classmethod?

Things that work well I've found:

0 3
0 467

Hello,

The title says it all. I’m building an IRIS image with docker-compose using a separate Dockerfile. Pretty straightforward procedure: I import a Installer script inside the container containing a Installer Manifest I defined. Within the manifest, I create a namespace with code and data databases in separate locations. My intention is to keep the code database inside the container, so whenever I build the container, the imported code is replaced. The data, however, should be persistent.

2 6
0 464

Hi All,

I would like to merge json files. From a BPL we're running an operation to get data from a REST service cursors. We would like to run the REST calls until no cursor is present in the response of the rest call.

This works fine, but I would like to combine/merge the json outcome and write it to the disk.

See my attempt below for merging 2 json files.

Class Test.TestClass
{

0 4
0 463

Hi,

I am trying to use the newly introduced adapter EnsLib.CloudStorage.InboundAdapter to pull files from azure blob container for the purpose of ECG scaling.

The ultimate goal would be- more than one services running to pull the files from a blob container and process them further. I am not sure if there would be any concurrency issue on that. So working on a poc to pull the data from server and test it out.

0 2
0 458