Is there any good documentation/tutorials on creating gateways in both directions between FHIR and Hl7v2 (for Health Connect)?

the scenarios I'm most interested in

1. Client application sends a FHIR demographic query to Health Connect - and the interface has to convert this to Hl7v2 QBP^Q11 message to the PAS.

2. Health connect sends a PDF document (from a file or HL7v2 interface) to an EPR over FHIR.

Thanks

Stephen

UPDATE

0 5
1 970

Does anyone in the developer community have experience implementing a customized SDA3 container within HealthShare? There is a course on the learning site (ISC1086) that discusses how to do this, but it's currently listed as "coming soon" and I'm hoping to find some documentation.

1 2
0 946

HealthShare HealthConnect and Information Exchange version 15.03 support import transformations from C-CDA 2.1 to SDA. You can find these transforms in your installation's csp/xslt/SDA3 directory. For general information about import transforms, see "CDA Documents and XSL Transforms in HealthShare" in Overview of Health Connect.

Among the enhancements to import functionality added in connection with C-CDA 2.1 support is the ability to preprocess your C-CDA input files prior to the transformation done for import.

2 0
0 932

December 13, 2021 - Advisory: Vulnerability in Apache Log4j2 Library Affecting InterSystems Products

InterSystems is currently investigating the impact of a security vulnerability related to Apache Log4j2.

3 0
0 918

I was searching for the most simple way to connect from visual studio code to my local instance via terminal without having to change any window.

I know this can also be achieved via telnet but seems a bit overhead if you're in your local machine.

For me the simplest sollution is to open a terminal window in VS Code, navigate to the /bin folder of your instance installation and run .\csession.exe INSTANCENAME

For simplicity you can just include your /bin folder in your path so you don't even need to navigate there

1 1
1 916

Hi Dev Community,

My team is currently working on a project where we need to post pdf documents to a 3rd party REST API.

The API specifies a field in the JSON request message to contain the 'physical content' of the file as an array of bytes, example of the JSON request as follows - data truncated for readability purposes:

0 3
1 906

Hoping someone can help.

I had posted a similar question outside this group a while ago "Errors requesting data from local Ensemble FHIR Repository" but haven't had the chance to follow up on it since. It was suggested I re-post inside this group.

I'm trying to request data from my local FHIR repository using a simple JavaScript client and am getting the following CORS errors . ( It is a standalone client not inside HealthShare without CSP etc. on my localhost ).

0 4
0 897

This is more for my memory that anything else but I thought I'd share it because it often comes up in comments, but is not in the InterSystems documentation.

There is a wonderful utility called ^REDEBUG that increases the level of logging going into mgr\cconsole.log.

You activate it by

a) start terminal/login

b) zn "%SYS"

c) do ^REDEBUG

6 0
0 891

Hello,

When creating an outbound X12 file (834, 835, 837, etc), what's the easiest way to keep a segment count to use in the SE01 element? Other mapping tools I've used either detect it's an X12 file and do this automatically, or there's an option to keep a count after each outputted segment. The Data Transformation tool within Health Connect doesn't seem to have similar functionality, but I could just be missing something. Any help would be greatly appreciated!

Thanks,

Jason

0 3
0 889
Question
Paul Hula · Nov 2, 2016
Healthshare FHIR Subscriptions

Hello All,

Having a recent project to create a FHIR repository, I want to know (as looking at the code) if HealthShare FHIR implementaton supports subscriptions?. I know it records the subscriptions ok, BUT does it handle sending the subscription out (based on the tags) to an endpoint (i.e. when a new FHIR request commits data that would trigger the subscription) ?, I'm 50% it doesn't, but would rather find out for sure before shoe horning something in.

Regards

1 9
0 886

I already talked about GraphQL and the ways of using it in this article. Now I am going to tell you about the tasks I was facing and the results that I managed to achieve in the process of implementing GraphQL for InterSystems platforms.

What this article is about

  • Generation of an AST for a GraphQL request and its validation
  • Generation of documentation
  • Generation of a response in the JSON format
5 2
2 885

I'm looking for options to create multiple DFT HL7 messages based on data contained in a ZCO segment in a single inbound DFT message. I have the following ZCO segment:

ZCO|CCC^Charge Code|1306794,1071301,23510,1071424|MFCD^Charge Code|14232,3542|||||

In this example, I need to create a new DFT message based on the data contained in ZCO:2. Each code needs to be in it's own DFT message and put in FT1:7.1. The number of codes will vary for each inbound message, but each code will need to create its own outbound message to the client.

0 5
0 874

I needed to pass through a file with Ensemble but the operation wasn't writing some filenames as given because the EnsLib.File.PassthroughOperation 'sanitizes' filenames removing characters that are not valid on some operating
systems;
09000655_AEDC_C3344059_A/E_Martin Browne_09000655_201706221018.pdf
09000655_AEDC_C3344059_A#47E_Martin_Browne_09000655_201706221018.pdf

1 0
0 846

Hi,

I am a beginner on intersystems technologies ! and i want implements Oauth2 for our projects ( Angular 2 + Caché REST Backend).

i read the article that the link is below :

https://community.intersystems.com/post/cach%C3%A9-open-authorization-framework-oauth-20-implementation-part-1

But : i need to create all servers ( Auth and Resource ) on Caché and dont' to use google server.

0 4
0 846

While reviewing our documentation for our ^pButtons (in IRIS renamed as ^SystemPerformance) performance monitoring utility, a customer told me: "I understand all of this, but I wish it could be simpler… easier to define profiles, manage them etc.".

After this session I thought it would be a nice exercise to try and provide some easier human interface for this.

The first step in this was to wrap a class-based API to the existing pButtons routine.

I was also able to add some more "features" like showing what profiles are currently running, their time remaining to run, previously running processes and more.

The next step was to add on top of this API, a REST API class.

With this artifact (a pButtons REST API) in hand, one can go ahead and build a modern UI on top of that.

For example -

6 15
4 814

The same piece of data never throws this error on other operations. I am getting this error on one always .

The same SDA container never throws error on other operation.

ERROR #6901: XSLT XML Transformer Error: SAXParseException: invalid character 0x1C (Occurred in an unknown entity)


Set xslt=##class(%Dictionary.XDataDefinition).%OpenId(..%ClassName(1)_"||Xmethod",-1,.tStatus)
$$$ThrowOnError(tStatus)
Set tStatus= ##class(%XML.XSLT.Transformer).TransformStream(myStream,xslt.Data,.OpStream)
$$$ThrowOnError(tStatus)

XData Xmethod
{

0 1
0 788

Hello All,

I am able to transmit a small batch of billing files: B/W 5 and 20 without issue-
Put stream 11@%IO.LibraryStream to /SFTP/unmhsmcsa/OUT/TEST_021920201426.tst

But when the size of the batch increases to over 20 the operation hangs and I receive the error below: The file is created in the SFTP server with 0 data.

0 1
0 783