#HealthShare

Hey everyone!

I had looked around a bit and couldn't find a native way to log queue counts in Ensemble/HealthShare so I wrote a quick task and persistent class to do it. Hope this saves someone a bit of time. Let me know your thoughts! Thanks! 

Bobby Hanna

I am looking to get the exec statement when we call the SP with ..Adapter.ExecuteProcedure.

Set tSQLQuery="exec pSPName ? ?  ?"

Set Status = ..Adapter.ExecuteProcedure(.tResultList,.tOutParms,tSQLQuery,"iii*, 1,2,3)

Get the exec string:  exec pSPName '1', '2', '3'

Hi Community,

I'm looking for a new contract with immediate availability.

I have 20 years experience with InterSystems technologies in areas such as Healthcare integration and single page web development.

I can work almost anywhere in the UK as well as remote work from my office in Exeter.

If you know of any opportunities or could pass on my LinkedIn details to anyone that might be looking then it would be very much appreciated.

https://www.linkedin.com/in/sean-connelly-94a6901/

Kind Regards,
Sean.

Hi, 

Alert emails are pretty terse - they are fine for me but I'd like something a bit more friendly when sending alerts to end users. 

Instead of this

QueueWaitAlert: Message Header Id '522408569' queued for config item 'alerttoXXXsystemmanager' with priority 'Async' has been queued for more than 600 seconds

I'd like to send something like this:

Hi Bill, 

Messages to system XXX are taking over 10 minutes to send. 

The receiving system/service may need to be reset.

if you have an questions pleaes call me on 555-12345678

Kind regards, 

Stephen

Integration Team 

i was just going

Hi Dev Community,

My team is currently working on a project where we need to post pdf documents to a 3rd party REST API.

The API specifies a field in the JSON request message to contain the 'physical content' of the file as an array of bytes, example of the JSON request as follows - data truncated for readability purposes:

{
    "CaptureSource":2,
    "RecipientID":"ID34",
    "Document": {
        "Guid":"5D847A4E9CC1485382DC4A5F5DC80D6C",
        "EventDate":"2019-01-14T13:23:46",
        "FileExtension":"pdf",
        "FileContent":"JVBERi0xLjQNCiXi48/TDQoxIDAgb2JqDQogIDw8DQogICA......"

Slowness of the 'Source' and 'Target' parameters in the (portal) Message Viewer is caused by the Bitmap indices of Ens.MessageHeader.

Running the 'bitmap index clean up' routine for Ens.MessageHeader will fix the issue.

I checked with WRC and they advised:

“Yes it is safe to run this tool on a live system. It will eat up 1 CPU and load a lot of data from disk into global buffers so I would suggest running it at a slower time of day.”

To compress the Bitmap indices of Ens.MessageHeader use the terminal to call OneClass():

zn "PRODUCTION"

do ##class(%SYS.Maint.Bitmap).OneClass("Ens.MessageHeader",1,0

This is more for my memory that anything else but I thought I'd share it because it often comes up in comments, but is not in the InterSystems documentation. 

There is a wonderful utility called ^REDEBUG that increases the level of logging going into mgr\cconsole.log. 

You activate it by

a) start terminal/login

b) zn "%SYS"

c) do ^REDEBUG

d) change logging level to FFFFFFFF

if you are on you production system (with lots of traffic) I suggest you quickly reproduce the error, rename the cconsole.log file, and repeat the steps above to set the logging level to FF. This is mostly because having the logg

Keywords:   Jupyter Notebook, Tensorflow GPU, Keras, Deep Learning, MLP,  and HealthShare    

1. Purpose and Objectives

In  previous"Part I" we have set up a deep learning demo environment. In this "Part II" we will test what we could do with it.

Many people at my age had started with the classic MLP (Multi-Layer Perceptron) model. It is intuitive hence conceptually easier to start with.

So let's try a Keras "deep learning MLP" with standard demo data that everybody in AI/NN community has been using. It is a kind of so called "supervised learning". We will see how simple to run it on

InterSystems has corrected a memory leak in applications that pass by reference to a formal parameter that accepts a variable number of arguments.

This problem exists for:

• InterSystems IRIS Data Platform – all currently released versions
• InterSystems IRIS for Health – all currently released versions
• HealthShare Health Connect 2019.1.0

If this defect occurs, the process partition will eventually be exhausted, resulting in a <STORE> error.

The defect occurs if application code calls a subroutine passing an argument by reference to a parameter that accepts a variable number of

I am working on documentation on HealthShare and Standards, and in trying to define "SDA" I have found

multiple references.  One is "Summary Document Architecture" and the other is "Structured Document Architecture" .

I am looking for the definitive reference from InterSystems and have not yet been able to find it.

Any information would be greatly appreciated!

Hi, 

Is there any facility in Health Connect to notify us before a SSL/TLS security certificate expires?

I'd be interested in how other teams handle this as we are using TLS/SSL a lot more to integrate with external services. 

Kind regards, 

Stephen
 

Hello,

When creating an outbound X12 file (834, 835, 837, etc), what's the easiest way to keep a segment count to use in the SE01 element?  Other mapping tools I've used either detect it's an X12 file and do this automatically, or there's an option to keep a count after each outputted segment.  The Data Transformation tool within Health Connect doesn't seem to have similar functionality, but I could just be missing something.  Any help would be greatly appreciated!

Thanks,

Jason

InterSystems has corrected a defect that can result in application data integrity issues following an abnormal shutdown.

This problem exists for:

• Caché and Ensemble 2018.1.2
• HealthShare Health Connect (HSAP) 15.032 on Core version 2018.1.2
• InterSystems IRIS Data Platform 2019.1
• InterSystems IRIS for Health 2019.1
• HealthShare Health Connect 2019.1

The defect breaks the journal sync guarantee that all updates in the journal buffer have been written to the journal file. The failure is silent: it does not generate an error message and there is no entry about it in any log file.

Speci

I'm looking to see there is a way to create a holding queue in Ensemble.  I have a ORM message that is coming into the  Engine.   I want to convert that message into a ADT^A04.  Then send the ADT first and the Original ORM message behind it.  How can I hold the Original ORM before I send the ADT message before it?

Hi,

I would like to use EnsLib.HL7.Operation.HTTPOperation for sending HL7 messages via HTTP. It sends the Content-Type as "text/html"

I would like to change it to something else, say "text/plain". I cannot see a way to do it.

I have now written a custom Operation (based on EnsLib.HTTP.OutboundAdapter) and modifying the Content-Type while POSTing using SendFormDataArray(). It's bit frustrating to parse the response etc.,

I would rather prefer to use HTTPOperation of HL7. Can somebody help?

Thanks.

Hi Everyone!

One more session recording from Global Summit 2018 is available on InterSystems Developers YouTube Channel:

Productivity for Interface Engineers

Hello,

My company is looking evaluate upgrading to HS 2019 and I am not sure where to obtain a copy of this installer. Any help on this and a evaluation liscense would be appreciated.

Hello,

currently we have a problem in development with the character set of the response message.

We are transmitting an HL7 message with an operation based on the EnsLib.HL7.Operation.HTTPOperation class.
We have changed this as follows.

Set pMsgIn=$$$NULLOREF, tHttpRequest=##class(%Net.HttpRequest).%New(), tHttpRequest.WriteRawMode=1, tHttpRequest.ContentType="APPLICATION/HL7-V2; charset=UTF-8"

Unfortunately, the ContentType character set is not read correctly in the response.

This is the response:

0000 00 15 5d 4b c0 00 00 1a e2 4a 45 00 08 00 45 02 ..]K....JE...E.
0010 02 5a 35 ec 40 00 7f 06 6b

So i'm having this problem with the task manager, the tasks simply stopped running. I had a problem with queued massages and trying to figure out what to do i'm afraid I may messed up something else, can someone help me ?

Hello All!

I'm brand new to HealthShare and trying to enable LDAP Authentication. When I run the authentication test, the base DN looks good and the search user is successfully authenticated. However, the user is still not found. We have a linux installation in Azure, and I'm connecting to a Windows AD server (provided both Azure and local hostnames). I'm using the full DN in the username field. For the "LDAP Unique search attribute" I've tried, CN, DN, and sAMAccountName. For now, I'm not using TLS and I've unchecked the "Use LDAP Groups for Roles/Routine/Namespace" and cleared out the user

Hi Everyone!

New session recording from Global Summit 2018 is available on InterSystems Developers YouTube Channel:

InterSystems Healthcare Showcase

Hi, 

It is sometimes undesirable to send a full demographic or results feed to departmental clinical systems, that only see a subset of the patients.

While some systems (paediatrics, maternity, geriatrics) can filter on patient demographics, a number of systems are for cohorts of patients that don't fit a particular criteria.

One of our system vendors has a patient index filter service that keeps a local index of relevant patient identifiers, and only forwards matching messages.

Another system takes the full feed, but we gave found this problematic as we can often get demographic updates faster th

Hi There ,

     We are trying to do a small POC trying to integrate NHS Careconnect with Ensemble/Healthconnect. Does anyone have implemented this before. It would be good that you provide some suggestions  or any sample implementation. It would be good to get suggestions any  interesting use cases 

within NHS England for the POC.

Hi All,

I need to transfer the sub-directories and their contents from a SFTP server to a shared directory while maintaining the structure.

I can do it without maintaining the structure.

Best Regards.

Michel.

P.-S. : files are HL7 messages.

Hello everyone

I have a server configuration in a CSP Gateway installed on a PC (let's call it S2) different from the main one (let's call it S1). This configuration allows me to access a web application that is installed on S1, from a client C asking S2 for this webapp. But for now it works only in HTTP between C and S2, and we would like to use HTTPS (as it already works between S2 and S1).

First here are the tutos found in the doc:

https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KE…

https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KE…

We are pleased to announce the availability of HealthShare 2019.1.

With this release, HealthShare delivers:

• Clinical Solutions, including substantial enhancements to the mobile-enabled Clinical Viewer, Clinigraphics enhancements, and the first of a new line of out-of-the-box answers to important operational and clinical questions, starting with the Health Insight's Emergency Department Frequent User Dashboard
• Enhanced Workflow with new site navigation for clinical and business users, Single Sign-On operation with EHRs, and enhanced patient data collection forms
• A Superior Foundation that

Hi Community!

New video is already on InterSystems Developers YouTube Channel:

Implementing SSO for UI Integration

Hi -

I was wondering how if the "old FHIR gateway" works with the latest release of HealthShare Information Exchange. Since there is an impact on the amount of storage needed to use the "FHIR Gateway 2 which uses the Operation Data Store (ODS)", my question is how (if at all) can FHIR access to Information Exchange work without ODS?

Thanks

I am trying to base64 encode a string with non standard characters encoded in utf-8 also tried windows 1252  and I am getting error like so 

ERROR <Ens>ErrException: <ILLEGAL VALUE>zEncodeStream+18^ -- logged as '-' number - @' set encString = $TRANSLATE($SYSTEM.Encryption.Base64Encode(streamString),$C(10,13))' 

any help appreciated if anyone has faced this before

The 2019.1 version of HealthShare Health Connect is now Generally Available!

Kits and container images are available via the WRC download site 

The build number for these releases is 2019.1.0.510.0.18883

Health Connect 2019.1 includes many new features and capabilities, most notably:

• FHIR STU3 Support
• Java Business Hosts
• Managed File Transfer (MFT)
• Containerized and cloud deployment
• New interoperability capabilities that speed configuration and troubleshooting of productions

These are detailed in the documentation and release notes for Health Connect

Upgrades - Health Connec