New post

#Web Gateway

0

InterSystems IRIS component that serves HTTP requests to InterSystems IRIS data platform.

Documentation: InterSystems Web Gateway for Web Services

Hi Guys,

I have a DB server (ser-app-db) where IRIS is installed as server.

I have a Web server (ser-app-w) where IRIS is installed as web server and configured as CSP gateway.

I followed the configuration guide and ser-app-w perfectly display the CSP and CLS pages.

But that's not working for my REST service, for exemple with the REST sample:

http://ser-app-db/REST/CRM/Get?ReqID=123(GET): work and show the request

0 3
2 1.1K

We recently moved from using the Private Web Server, to using an Apache/Web Gateway setup and moved towards using the built in LDAP functionality within IRIS. Since then, we have 1 user that uses VSCode (/api/atelier) heavily that continues to have issues signing into IRIS through VS Code and the /api/atelier extension.

I am trying to troubleshoot two issues..

0 7
0 728

We tested REST Services as described for Caché DocServer example and for requests using http protocol it works without problems. However when we use the https protocol for the same REST Service it is not available. Our infrastructure is as follows: Apache with openssl, which works on the other hand well for CSP with https. If we switch on the web gateway http trace facility we could see the request of CSP pages by https://... but again a request of a REST Service by https:// will not result in a entry in the tracer. We hope that this description of the problem is understandable.

0 1
0 715
Question
· Nov 14, 2022
SSL Configuration for Gmail

Hi Community,

I am configuring new SSL Configuration for Gmail (For sending errors to gmail in ensemble production) by following the below steps.

Step1:

Step2:Giving the server address smtp.gmail.com

Step3:Giving the port number , I have tried giving 465,587,25 as port number still is not connecting

Can anyone please tell me where i am doing wrong on configuration?

Thanks,

Saroja.A

0 7
0 609

After what is seemed was weeks, I finally got SSL/TLS enabled on both Apache Web Server and IRIS using the Web Gateway. However while we can now use HTTPS to connect to our Development instance of IRIS, I am running into several errors when I have others try to access the Management Portal via HTTPS.

We are seeing...

0 6
0 440

Hi All,

I hope someone can help me with the following, it's about the usage of the class EnsLib.HL7.Service.HTTPService.

Working situation right know.

In IIS we've got a site configured who is dealing with the client certificate, etc and redirect the full request to http://localhost/csp/healthshare/NAMEPSACE/EnsLib.HL7.Service.HTTPServic... and the web gateway redirects the request to Business Service 'EnsLib.HL7.Service.HTTPService.cls'.

0 2
0 424

I am not sure if this is the correct place for this question, but I am struggling to setup TLS security for our IRIS Management Portal and etc. through Apache and the Web Gateway. I have a couple of questions when it comes to the setup.

  • if I build a private key and certificate within Red Hat, does that certificate have to be on everyone's pc to connect to the Management Portal?
  • Can I use a self signed Certificate?
  • Can I use the existing CA on the server, or do I need to work with my Data Security team to get a Certificate?
0 1
0 408

Running HealthConnect 2021.1 on RedHat Linux 8.4.

I've configured IRIS/HealthConnect with an external web server to support TLS encryption. It's installed on the same server as IRIS, but is a different instance and version of Apache httpd. That all works as expected.

I would also like to keep the "private" web server available, but I'm having an issue with using the fully-qualified domain name in the URL vs. just the hostname itself.

If I use http://servername:52773/csp/sys/UtilHome.csp to log on, all is well.

1 7
1 314

Hi all!

I'm currently trying to find out how to have one Web Gateway route to multiple servers Management Portal. The only thing that I have come up with so far is to potentially make different routes per server?

I have a development, test, and production server and I want to use the same Gateway server using IIS to do SSL/TLS encryption for the CSP pages.

Any ideas or recommendations to pull this off?

0 4
0 310

I am using the event logger from CSP gateway with level "v9r" enabled, in order to dump the raw content of some HTTP requests.

I would like to decode the body response data, when it's in binary form. AFAIK the event logger will convert characters outside the 32-127 range (EBCDIC) to the "\xff" notation (where ff is a hexadecimal value). Here is an example :

0 4
0 274

This is probably not the right place, but I don't know who I can reach out to... I am trying to configure an Apache/Web Gateway to our instance of IRIS so we are no longer using the built-in PWS. Can anyone point me in the right direction to configure Apache/Web Gateway to repoint

http://<server name>:52773/... to the https://<server name>/...

gateway so our users will not notice? How do I do this in Apache, do I need to modify httpd.conf or the ssl.conf file? What is the correct syntax...

0 7
0 262

I recently started work on trying to Tighten Security in our Development Instance of IRIS that is running based on recommendations from our Audit as you might of seen from my other posts. I am currently trying to get into the Private Web Gateway Manager within IRIS as CSPSystem, but when I attempt to sign in nothing happens.

I went through and reset the password in the CSP.ini and within IRIS for CSPSystem. I made sure it had the new GatewayRole per suggested

0 2
0 229

I'm having trouble adjusting the protocol used for any CSP Requests. Currently all request to the system are sent over HTTP 1.1

When loading 40+ images on a page, the browser starts stalling request. According to google HTTP 1.1 only allows 6 parallel TCP Connections before suspending the remaining.

I have looked through the Web Gateway Settings, %Net.HttpRequest.HTTPVersion and SSL Configuration but haven't found anything.

0 7
0 222

We have a machine that serves 4 instances of Cache on VMS systems, one of them is password protected and works fine as they all do. we decided we wanted something beefier and copied it to a server, well all but the one you have to login to works so 3 of the 4 do. and the odd part is I can no longer get to the management page from anywhere on any machine, http://localhost/csp/bin/Systems/Module.cxw I get a 404.8 error, I have tried adjusting security and same thing. and a server availability error.

0 4
0 214

Hi All,

Been trying to setup a iris 4 health community version along with a webgateway bothing utilizing docker. The documentation seems a little sparse when it comes to configuring each of these to work together, especially when it comes to utilizing the Webgateway to front end the MGMT pages for Irirs 4 Health.

I know there is a github repo that has a docker compose file, but that doesn't see to provide a light on what needs to be configured in order for it to work.

0 2
0 198

Hi InterSystems Community

We recently had an issue where we weren't able to parse a JSON HTTP request, but the issue went by unnoticed. We also did not have a trace of what the raw HTTP request was that we couldn't parse. I'm looking at improving our this by:
Tracing the raw request using $$$TRACE

Raising an alert which will hit our Ens.Alert router which will compose and send an email

1 0
1 187

We're trying to get a little more discipline around Web Gateway change control, and deploy changes to our CSP.ini from source control. I was wondering if anyone cared to share their best practices in this area? There is a "RELOAD" parameter (https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cls...) which says you can put RELOAD=1 in your CSP.ini file in order to force it to automatically activate when noticed by the daemon.

0 6
2 185