SOAP (abbreviation for Simple Object Access Protocol) is a messaging protocol specification for exchanging structured information in the implementation of web services in computer networks.
I am trying to use the %ListOfDataTypes functionality, but am hitting a limit of 50 characters for each entry, when being used in a Web Service. Is there a way to increase the number of characters that can be used in the %ListOfDataTypes through a web service?
Does the Caché installer do all of the necessary setup for using Atelier when upgrading a pre-Atelier instance?
I just upgraded an Ensemble 2016.1 instance to 2016.2 and the /api/atelier web application wasn't created automatically. Aside from creating this web application is there anything else that needs to be done to support Atelier?
** UPDATE **
See my comment below -- this was caused by a permissions problem during the upgrade. After fixing the permissions problem and upgrading again Atelier works.
We recently updated Ensemble, on our Unix DEV server , from version 2013.x to 2015.2.3 (Build 855U) and when we test our SSL/TLS configuration we get the following error:
ERROR #729: Certificate /qmd/ens_chldev_1/mgr/SILCert/SILCSSSJR-CER.cer is not valid for TLS Web client authentication .
The certificate was working fine before the update in DEV and it is working fine in our PROD Unix server with Ensemble 2012.x. Any ideas why we are getting this error?
I need some clarification on web service (Soap Service). For each Soap request, system consuming 1 license and it is not releasing until CSP session timeout and extra grace period 5.10 minutes(310 seconds). Due to this, at some time license consumption is full. If i use with Login credential (i.e password authenticated web service), it consumes one license for 25 connections(request). But i need to use it as anonymous user(Unauthenticated). Please advice.
I faced with the issue when WebSocket connection just fails without any errors if I send data with size 384 bytes and more (In binary mode the same). As I know by standard WebSockets frame does not have such limitation. Is there any way how to decrease it? This limitation too small, it is too difficult to fit this size and needs to send data much more often than I expected. Tested with Caché 2016.2, 2017.2 and IRIS 2018.1.
I want to secure a SOAP Webservice (an EnsLib.SOAP.Service one, if that matters) adding a SSL/Username Policy to it. As im not sure how detailed my request here should get, ill try giving a detailed as-is description of my setup, what I've tried, how I tried to test the connection and what problems including some logs I ran into.
As a small foreword: I'm pretty new to the whole security aspect of intersystems and soap itself.
I have a SOAP Client class that connect to a WS Service. This structure and configuration is the same for some providers that are integrated with my solution.
If I call to a provider, it returns the XML expected. But there is a provider that raises an error:
ERROR #6243: HTTP request to SOAP WebService returned response with unexpected CONTENT-TYPE: application/wsdl+xml
I've got this piece of code which runs the method "WebMethod", that belongs to %SOAP.WebBase.cls.
It grabs the outcome from an internal webservice we have and after that, it writes into a file.
The thing is, when I browse the file contents, I realize that in the place where a special character should be, I see a question mark.
By querying the same webservice from a special soap tool called "SoapSonar" (I've been using this for years), the outcome shows up this special character (shows it properly).
https://www.youtube.com/embed/NWWSGs5NDGI [This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]
I have installed in Windows 10 the following: CACHE 2016, node.js v 4.4.7 and express .
- where can I get cache.node? The link in the Intersystmes documentation http://globalsdb.org/downloads/ doesn't work. I found cache0100.node and cache0120.node in my Cache instance's \bin directory. But I am not sure if I can use them or not.
- how to install cache.node ? Where do I place it exactly?
Can anyone recommend any tutorial or code example with installation instructions?
Hi everyone, I have and Zen Mojo application, it's all working but I have some doubts about what is recommended to use: There is some reports of employees, for example, and actually I'm using some plugins : "Excelent export" to generate Excel reports and "jspdf" to generate PDF reports in client side.
I have an REST service, that receives the request, process and returns JSON, after client side receive the response it's processed.
- This can be slow/bad in applications with large data?
- It's better/recommended to use ZenReports even with ZenMojo applications?
I have a %GlobalBinaryStream object that I'm trying to save as a local file after being received through a SOAP Web Service.
To do this, I created a %Stream.FileBinary object and wanted to set where the stream copied to this object would be saved by using either the DefaultStreamDir() ClassMethod or the NewFileName() ClassMethod. However, the documentation isn't very helpful on how to use these ClassMethods.
We are planning to use Caché users on a SOAP web-service, so the WS-security tokens will be used. It will be username and password only for now. The passwords should expire on a regular basis and this will be configured in the system-wide security settings. The consumer of the web-service should be able to change their password on-demand or when it has expired, via a web-service call.
For the on-demand change, I can create a service method which can be called by the consumer to change the password.
I have an imported WSDL from SalesForce and I am trying to send a login-request to the SalesForce-servers via InterSystems. The login requires a username and a password in the body, and an organizationId in the header. I am having trouble filling the organizationId in the header.
Via SoapUI I can send a successfull message to the SalesForce-servers. The message should look like this:
We have a SOAP web service that we call to retrieve a stream of a PDF file. The web service is written by another group in our company (not a Cache group). We are running into one issue where it seems that the PDF is too big and when it is sent to us we get this "ERROR #6301: SAX XML Parser Error: <STORE>". The stream is about 8mb. This is the first time that we have encountered this issue.
We have a WRC ticket open about this but doing some research, we found that if we increase the $ZSTORAGE then we no longer get this error when we call the web service for this 8mb file.
Has anyone had success with passing in a collections property within a SOAP request to a Soap Service in Ensemble? Please reply with how you set up that collections property. I am able to successfully send a SOAP request correctly containing the elements of the collection property to Cache, as seen in a custom soap log file which I am using to troubleshoot. But the collection property in the Ensemble request is not getting serialized, meaning MyContainers has nothing.
My.Request consists of a property, MyContainers, which can have 0 or more Containers (My.Container)
Source is CSV File will be translated to HL7 using data Transformations. All the transformed messages need to be sent to destination System through SOAP request as a single Batch File.
Call a web service to get an authorization key, comes back as a simple string
Create a request object with data from the HL7 message and send it to the Web Service
The main web method call requires that key I received as a Soap Header element. All I can pass to the SOAP Operation business class is the request object with the data I plucked from the HL7 payload. Nothing in that particular request message has anything in it that tells anything to send the header, too.
Is it possible to dynamically adjust the RetryInterval andFailureTimeout settings in a BPL?
I've got a business process that calls a web service operation to get a session ID from an external system. There is a string property returned in the body of the response that indicate an exception occurred in the external system. I have code in the BPL that examines the property and sets the status property to an error status when that occurs.
I create a WebService in Machine One, with some process, i tested this webservice with SOAPUI, worked.
After that i create a simple Business Operation, SOAP Adapter, based on WebClient created with SOAP Wizzard, the problem with that is on response var, i have empty var on my operation, somebody have some Ideas ?
I use the InterSystems cache to implement a web services program. I receive the data sent by the other person. However, I receive the wrong text (the normal text is the question mark "??????"). The other party uses the gbk code to send Chinese. The other party cannot modify the gbk code, what should I do to receive normal Chinese text? Thank you.
By likes
..png)