New post

#SOAP

11

SOAP (abbreviation for Simple Object Access Protocol) is a messaging protocol specification for exchanging structured information in the implementation of web services in computer networks.

Learn more.

I am attempting to configure an inbound service that utilizes the EnsLib.SOAP.GenericService class. This service receives HL7-v3 content wrapped in SOAP requests. Despite reading the documentation on configuring SOAP services, I am still confused.

In my current configuration item "Fr_Centrak_RTLS", I have ‘Enable Standard Requests’ checked, ‘Pool Size’ set to 0, and the port is unspecified.

0 1
0 13

Hello everyone, I need some help.

I have to send some events for a government WebService that I already imported the WSDL and XSD's and It worked fine and I'm able to build the message and connect into the service, but It has been rejected with the message that the XML is wrong and the only diference between the Caché SOAP message to all the examples that the government gave us is the header:

This is how the Government is expecting the message:

0 10
0 94

A customer recently asked if IRIS supported OpenTelemetry as they where seeking to measure the time that IRIS implemented SOAP Services take to complete. The customer already has several other technologies that support OpenTelemetry for process tracing. At this time, InterSystems IRIS (IRIS) do not natively support OpenTelemetry.

Open Exchange app
11 4
1 276

How to send the HL7 Batch messages over a SOAP webservice which takes 3 credentials(Username, Password& Org.ID) using IRIS Management Portal V 2019.1?

WSDL xsd : element - 1.Username , 2.Password ,3.Org.ID ,4.HL7 Message.

Info I had -

Source is CSV File will be translated to HL7 using data Transformations. All the transformed messages need to be sent to destination System through SOAP request as a single Batch File.

0 0
0 72

Hello,

First of all thanks for your time, and thanks for your help.

We have the following doubt: how HTTP status is being replied from a SOAP Service to the Outbund System?

Where in HealtShare 2020's classes is being replied an HTTP/200 OK or an HTTP/500 or any SOAP HTTP status code?

We ask this because some outbound systems do need to have an HTTP 200 to being able to process our SOAP responses.

We have been examining the following classes:

EnsLib.SOAP.Service

0 2
0 68

First of all, thanks for your help, and time reading this question.

Why, when we send a SOAP message from SoapUI to a SOAP service in a HealthShare environment called 'ESBCHUIMI,' it recognizes the 'Credenciales' header, which has 'usuario' and 'password' as properties. This class is a %SOAP.Header.

However, when we load the WSDL using the SOAP wizard from this SOAP Service to another HealthShare environment called ESBSSCC and send it from SoapUI to ESBSSCC, when it is being forwarded from ESBSSCC to ESBCHUIMI, the ESBCHUIMI's service outputs:

0 5
0 82
Question
· Oct 17, 2023
Debugging a SOAP web-client

Pointers please for debugging a SOAP web-client.

We have several clients in different productions all accessing a web-service. We are trying to add another client in a new production, and its not working. The messages between the relevant Process and the SOAP web-client Operation are the same in the working and the non-working productions. But the web-service is reporting an XML parsing error to the non-working production. Here's the error as reported in the SOAP web-client Operation...

0 3
0 160

Does anybody know if there is a wizard to create SOAP client/server web services for IRIS from VS Code? I would like to not use Studio anymore but for SOAP web services looks like there is no alternative in VSCode.

Thank you in advance!

0 4
0 262

I recently created a new foundation namespace in my IRIS for Health instance. I am noticing that Registry entries such as the Service and XUA registries (HS.Registry.Service.SOAP and HS.IHE.XUA.Config) from my previously created foundation namespace are not available in my new namespace. Is there a setting that controls this, or is there a way to map these registry values to my new namespace? Other developers I talked with on my team expected these registry entries available to all namespaces and were surprised when I reported they were not.

0 0
0 108
Question
· Aug 16, 2023
Web client from SOAP Service

I created a web service and used the Studio SOAP Wizard to generate a client from the WSDL file of the service. But the client is throwing the error as shown below

WebServiceClientClass '' could not be instantiated, or the WebServiceURL Location could not be determined

What have I missed?

Is there a better way to create a client?

0 2
0 147

Hello,

We currently have the following scenario: We have a bussiness SOAP Operation, where we get a SAML String and we convert it into a %SAML.Assertion object correctly.

👩‍💻👨‍💻 We would need to send the SAML Assertion inside the SOAP Header to the Target System.

First of all thanks for reading, and thanks for answering.

We currently have opened Log Soap and we do not observe it being added to the SOAP Header, as you would observe in the following Log Soap:

0 1
0 161

Good afternoon,

first thank you from heart and mind, mind and heart; for reading, thinking, reflecting, responding, and above all explaining a possible solution and/or documentation to address this doubt.

We would need a way to get inside a SOAP Web Service the SAML Assertion, and then, send it directly to the endpoint throught a SOAP Operation.

Currently we have researched and developed how to get the SAML Assertion with the following code:

0 1
0 213

Has anyone had success with passing in a collections property within a SOAP request to a Soap Service in Ensemble? Please reply with how you set up that collections property. I am able to successfully send a SOAP request correctly containing the elements of the collection property to Cache, as seen in a custom soap log file which I am using to troubleshoot. But the collection property in the Ensemble request is not getting serialized, meaning MyContainers has nothing.

My.Request consists of a property, MyContainers, which can have 0 or more Containers (My.Container)

0 1
0 114

I have a %GlobalBinaryStream object that I'm trying to save as a local file after being received through a SOAP Web Service.

To do this, I created a %Stream.FileBinary object and wanted to set where the stream copied to this object would be saved by using either the DefaultStreamDir() ClassMethod or the NewFileName() ClassMethod. However, the documentation isn't very helpful on how to use these ClassMethods.

Right now, I have the below code:

1 4
0 205

I'm trying to create a SOAP service between two systems (one client and one server) to transfer files from the client to the server.

I'm reading through the documentation available at https://docs.intersystems.com/iris20223/csp/docbook/DocBook.UI.Page.cls?... but wanted to look at an actual example of code (preferably a small example for both systems).

If anyone has such an example or could create one, it would greatly help me understand how SOAP services work.

0 1
0 278

Hey guys.

I'm having trouble using the Certificate in my BO.

It started to occur after updating the certificate.

I have 2 configurations and 2 certificates, the first one was updated and no error occurs, the second one, the bad certificate or Handshake failure errors occurs. Both have the same configuration.
I already tried marking SSLV3, handshake error occurs. When I unchecked it, a Bad Certificate error occurs.

0 4
0 3K
Article
· Feb 14, 2023 9m read
Generate client SOAP and REST

Hi Community,

I would like to take advantage of our topic on capture for Health Data Warehouses (on DC-FR) to show you how to quickly create HTTP SOAP and REST clients. IRIS, as well as applications available on Open Exchange offers solutions to generate them from a WSDL or a swagger specification.

SOAP client

Nothing could be easier than creating a SOAP client. All you need is the WSDL. A wizard is available from the IRIS Studio. It allows you to generate not only your classes for a web service client but also the “Business Services” and “Business Operations” if you want to consume them with the interoperability framework.

5 4
1 583