#InterSystems IRIS for Health

Hi developers. I often miss the ZPM program on a clean system. Nothing complicated? Take and install. And in one line? Especially in a docker container. There is a solution. I'm very happy with it;) Maybe the line can be shortened?

set $namespace="%SYS", name="DefaultSSL" do:'##class(Security.SSLConfigs).Exists(name) ##class(Security.SSLConfigs).Create(name) set url="https://pm.community.intersystems.com/packages/zpm/latest/installer" Do ##class(%Net.URLParser).Parse(url,.comp) set ht = ##class(%Net.HttpRequest).%New(), ht.Server = comp("host"), ht.Port = 443, ht.Https=1, ht.

Good morning, evening, night,... 

A small reflection/question for today... it's true that new IRIS for Health (I4H) releases are more and more powerful each time regarding FHIR capabilities. Nowadays it allows us to consume FHIR resources with extrem easiness, we can connect with end-points in external FHIR servers very easily and make I4H act as passthrough or consume their resources... or, even more, we can define, configure and run a FHIR repository in, literally, less than 5 minutes.

Hey everyone,

I'm diving deeper into Caché ObjectScript and would love to open a discussion around the most useful tips, tricks, and best practices you’ve learned or discovered while working with it.

Whether you're an experienced developer or just getting started, ObjectScript has its own set of quirks and powerful features—some well-documented, others hidden gems. I’m looking to compile a helpful set of ideas from the community.

Once upon a time in Ensemble Management Portal the pool size of each component (Business Host) within the production was displayed in the Production Configuration page.

This information was very useful, especially when a production have tens or hundreds of components.

Now days the pool size is no longer displayed in the Production Configuration page and to get the pool size you need to click in each and every host in your production.
What if you have hundreds of business hosts and you need to check the pool size of each? It's a nightmare!

Hello community! I'm working on an internal innovation effort at InterSystems considering our documentation/resources around upgrades. As part of this, I'd love to have your answers to any/all of the following questions, either via comment or (if you prefer your answers to be more private) direct message.

Thanks in advance!

What InterSystems products + versions are you running? ($zv is ideal.)

What makes you decide to upgrade?

What are your blockers to upgrading?

What is your process for evaluating and planning a possible upgrade?

What documentation resources do you use?

Hi Developers! As part of an internal company hackathon at InterSystems, I'd love community feedback on a few topics. Feel free to chime on any/all of these via comment or direct message to me.

1. If you were to launch a new application/project, what problems would you need to solve right off the bat? What technologies would you use? Why?
2. What are the most common and repeated problems that you find yourself solving?
3. Where in InterSystems' technologies do you spend most of your time?
4. In a solution you have recently implemented, how were your time/efforts allocated? (e.g.

Hi, everyone, 

We in InterSystems Learning Services are compiling and reviewing different non-InterSystems materials for learning various technologies. To this end, can I ask:

-What are your favorite learning resources (books, courses, etc) that have helped you with the development and implementation of the FHIR standard and why do you like them? 

Thanks, Jamie Kantor

Certification Manager, InterSystems

We are very eager to learn what kind of feedback you might have for InterSystems.

We hope you had a chance to download and install one of the kits that show how the new process works. If not, you still can do it, following the instructions on these posts:

• https://community.intersystems.com/post/how-do-i-apply-nopws-early-acce…
• https://community.intersystems.com/post/discontinue-apache-web-server-installations-aka-private-web-server-pws

Our target release is InterSystems IRIS 2023.2 (and InterSystems IRIS for Health 2023.2) and will be available in a few months.

The IRIS Management Portal is localized (translated) for some (many?) languages and the language used by the Management Portal interface is determined by the browser settings, often derived from the OS settings (can be changed).

This means that if a user, like me, want to use ONLY the English version of the Management Portal, each and every time you login you need to change the language. VERY annoying.

I know I can change the language configured in Browser, BUT, I want to use English for the IRIS management portal non for all my internet activity!

Hi everyone,

This one had me breaking a sweat 😅

When a SOAP request has a %Stream.GlobalBinary property, it fails to serialize to base64 when stream is larger than ~43MB with 

ERROR #6301: SAX XML Parser Error: <MAXSTRING>xeWrite+7^%occXMLInternal

Unless you enable the following parameters :  

Parameter BASE64LINEBREAKS = 1;
Parameter USEPPGHANDLER = 1;

The first one instructs %SOAP.

Hi all,
I needed to pick up the username from a set of credentials configured for a business operation in an interop production, and it turned out to take a few steps, so I'm sharing my method here, in the dual hope that someone has an easier way to do it, or failing that, that it is useful to someone.
Best,
Otto

In the past, I've created custom SQL operations, but now I had something trivial to do, so I decided to take EnsLib.SQL.Operation.GenericOperation out for a spin. There's no example in the docs, so it was a little tricky. Here's what I ended up doing:

In my external database, I have 'mytable' with two fields 'id1' and 'id2'. Here are the pertinent Business Operation settings:

SQL: select id2 from mytable where id1 = ?
Input Parameters: [1] *id1
RequestClass: Ens.

With System Alerting and Monitoring (SAM) being deprecated in the near future..

• What is everyone's go-to for Monitoring IRIS? 
• What is readily available?
• What is the cost surrounding it?

Just trying to get ideas floating around of what we might need to start looking at to satisfy IT leadership.

Thanks

Scott

Hello Community,

I'm currently planning a system upgrade from Caché (2018.1.8.766) to InterSystems IRIS (2024.1). The environment consists of one database server and three application servers connected via ECP.

I’m considering two possible upgrade approaches:

1. Upgrade the application servers to IRIS first.
   Since IRIS is expected to be backward-compatible with Caché over ECP, the database server would remain on Caché temporarily.
2. Upgrade the database server first,
   followed by upgrading the application servers, as they don’t store data.

I am currently adding a field to our Existing messaging from Epic, however there might be a possibility I need to back load data into the Ancillary system. While I have the previous messages that can be sent, they do not have this additional field that I am adding to the message.

I can do a lookup against Epic Clarity SQL Database; however, I don't want to throw a wrench into the workflow if the system cannot connect to the Epic Clarity SQL Database.

• What is the best solution for this?

Hi community,

I created an app to generate vCard and QR Codes to patient data. This app is in the IRIS for Health contest, and I have more 14 days to improve the app with more features. What you suggest to my app:

Link to the app: https://openexchange.intersystems.com/package/QR-FHIR

With rapid evolution of Generative AI,  to embrace it and help us improve productivity is a must. Let's discuss and embrace the ideas of how we can leverage Generative AI to improve our routine work. 

Hey everyone.

As I have been working with IRIS (nee Caché) for some time now, I decided to take a look at how I manage things like functions and scripts that may not belong to a single namespace or environment, but should still have a home.

I have taken to creating a github repo where I can keep track of a single .cls of "general functions" that I can then drop into an environment when required.

I know the next ones:

1. Place all different settings in environment variables. You have a different .env file for each environment, and you must add some code to Production for reading and setting these values. It's good for deploying into containers, but challenging for management when we have a large production. I mean, we have many settings that can vary depending on the environment: active flag, pool size, timeouts, and so on. Not only endpoints.

2. My own case.

Hello Community,

Anyone who has (near or distant, with a preference for the 1st option) knowledge of the use of Amazon QuickSight with IRIS is invited to share his|her experience in this discussion.

Thanking you in advance.

Our customer wants mirroring even on same network and it just increases the cost for us without helping much.
Are there better solution to avoid fake impression of HA?

This one's for those of you who feel that InterSystems tech makes your life easier... whether you’re working on integration projects, building innovative solutions, or evolving existing ones.

I read the article by @Rodolfo Pscheidt:

https://community.intersystems.com/post/ollama-ai-iris

I forked his app and copied selected files from @Guillaume Rongier iris-rag-demo to make it containerized:

oliverwilms/ollama-ai-iris
 

I ran load_data.py and I got this output:

irisowner@e10968e4da42:/irisdev/app$ python3 load_data.py
Document ID: cbfa2f20-6627-407b-bbad-31722d18ca13
modules.json: 100%|█████████████████████████████████████████████████████████████| 349/349 [00:00<00:00, 778kB/s]
config_sentence_transformers.

In a healthcare setting we've an Ensemble namespace through which passes a key HL7 feed (the ADT feed from our PAS). It is split up, transformed and passed on to multiple downstream systems. We consider the feed going to each downstream system an interface. Each interface is developed as separately as possible - typically as a separate branch of our git repo (which we access via VS Code).

All this is fine till we try and name the version(s). We both want to know what is currently in live (the sum of all the interfaces in the namespace) and know what version each  specific interface is at.

Hi,

We're working on new capabilities to help you build Agents and AI applications faster with InterSystems IRIS. In order to better understand which entry points and development methodologies would help you most, we've created this brief survey: Building AI solutions with InterSystems IRIS. 

Filling it in should not take much more than 5 minutes, and your feedback on this exciting topic will help us fine tune our designs and prioritize the right features.

Thanks in advance!
benjamin
 

We are seeking experience or best practice for Sharding on IRIS and doing some testing on 2021. Appreciate if anyone can share your stories here. Thx!

@Qiao Peng @Nicky Zhu 
@Jingwei Wang 
@Li Yan 
 

Is anyone using the IPM client (e.g., running commands like zpm "install somepackagename") on an IRIS version earlier than 2022.1?

We're thinking about raising the minimum supported version so we can use Embedded Python in IPM. I'm curious if this would impact anyone. Of course, you'd be able to continue to use an earlier version of IPM.