#InterSystems IRIS for Health

With Intersystems indicating ZEN pages are being deprecated, I'm looking to find out how to add custom configuration pages for the management portal using the new method similar to the new Rules editor.

From what I can tell the new method uses rest pages using JWT Authentication, and has a mechanism to use the session cookie to generate the JWT token.

Hi all,
 

I am currently wokring on integrating unit tests into a project. I am also attempting to test productions with the TestProductions class. This works great, but I noticed that no code coverage information is being gathered when I run the production tests?

Am I doing something wrong (forgot to add something in the coverage.list for instance) or is TestProduction not intended for code coverage?

Thanks!

Hi InterSystems Community

We recently had an issue where we weren't able to parse a JSON HTTP request, but the issue went by unnoticed. We also did not have a trace of what the raw HTTP request was that we couldn't parse. I'm looking at improving our this by:
Tracing the raw request using $$$TRACE

Raising an alert which will hit our Ens.Alert router which will compose and send an email

I'm having an issue with consistently raising the alert (I've seen it raise an alert before, and then it wouldn't raise it again on a subsequent message), and also the error back does not really make sense.

We have a stand-alone web platform (readysetrecover.com) that helps people prepare for surgery focusing on the non-clinical – holistic and logistic aspects (stress reduction via meditation, sleep etc. as well as things like setting up the house, coordinating help from others etc).

We had a meeting with a hospital, and they liked our solution but said their goal is ‘to provide patient education and communication on a single platform'. They currently use Epic and MyChart.

Hello Community,

Is there any way to avoid generating the built in validation inside the classmethod from the .disp class definition. I've added the resource with path parameter as integer in swagger 2.0 open API.  The class method(in my case getRandom is the class method) inside .disp handles the integer validation by default. Is there a way to avoid/remove by default.

default validations for Integer

If ($number(pmin,"I",-2147483648,2147483647)="") Do ##class(%REST.Impl).%ReportRESTError(.

Hello,

I was just trying to get to the bottom of a TLS config - we have an interface with a TLS config that has had 'Server certificate verification' set to 'On', however the cert file specified either did not exist or contained a cert that was expired.

Does anyone know what the behavior is for this typically? I would expect this to not allow traffic on the interface, however this has been working fine for a few years now with an invalid cert specified for 'Server certificate verification' and set to 'On'.

Was at an HL7 Connectathon over the weekend and got in a scramble that headed us in the direction of trying out Preview 4 for I4H and found that the USER namespace, and subsequent namespaces created do not have any mappings included with them.

2022.1.0.209.0 - Our Previous working version

2022.3.0I4HFHIR (Build 4093U) - Preview 4

Anybody else seeing this?  
In most cases we provision with apis like:

zn "FHIRDB"

Do ##class(HS.FHIRServer.Installer).

Hi there,

My purpose is to encrypt a communication using JWT tokens.  I am developing on IRIS and my purpose is to generate a JWT token that will run on an older version of Cache (so I have to use functions that are compatible with the older version, Cache).

I wrote this code in IRIS:

s username = "user-test123"
set st = ##class(%OAuth2.Utils).TimeInSeconds($ztimestamp,0)
set et = ##class(%OAuth2.Utils).TimeInSeconds($ztimestamp, 60*15)

s payload = {"id": "test-id-123", "username": "test-username"}
s payload.exp = et
s payload.

Hi - I'm refreshing my IRIS instance, now upgraded to 2025.1, and ensuring IPM is installed in each namespace, as well as git-source-control, but in my first attempt I get this error. 

Everything else seems to work - but why the error (I'd like to get rid of it) ?

zpm:AULIBRARY>install git-source-control
 
[AULIBRARY|git-source-control]  Initialize START
[AULIBRARY|git-source-control]  Initialize SUCCESS
[AULIBRARY|git-source-control]  Reload START (C:\InterSystems\IRIS\mgr\Temp\VTigyGg\)
[AULIBRARY|git-source-control]  Reload SUCCESS
[git-source-control]    Module object refreshed.

I have been testing FHIR and Iris OAuth2 but have noticed that my callback (redirect uri) I have configured in the Client config, gets called multiple times with the same code.

Has anyone else experienced this issue?

Any help would be appreciated 

Getting the below error "InvalidNumberAppointmentminutesDurationpositiveInt" when HS.SDA3.Appointment.Duration=0  and attempting to Transform

 HS.FHIR.DTL.vR4.Model.Resource.Appointment.minutesDuration

Each DTL calls “ConstructClone” to make a copy of the message before making any changes to it. There will be hundreds of cloned-objects in case of hundreds of DTLs

It is expected to run the rules chain by using Rule Editor without DTL, namely against a SINGLE cloned-object (for example HL7 2.3, ORU_R01) with a FunctionSet in case of hundreds or thousand of rules under same protocol

Question is how to pass the cloned-object from one rule 1 to rule 2, and send the modified object to target Process or Operation in Rule Editor?
 

Has anyone used this transform to convert SDA3 to HL7?

HS.Gateway.SDA3.SDA3ToHL7.ADTA0N

Seeing below error

ERROR <Ens>ErrGeneral: Can't evaluate DOM path '/Patient/PatientNumbers/[1]/Organization/UniversalId' because UniversalId in /Patient/PatientNumbers/[1]/Organization/UniversalId is not an element, instead this node is a 'unknown' node. + ERROR <Ens>ErrGeneral: Can't evaluate DOM path '/Patient/PatientNumbers/[2]/Organization/UniversalId' because UniversalId in /Patient/PatientNumbers/[2]/Organization/UniversalId is not an element, instead this node is a 'unknown' node.

getting an error while installing  git-source-control
Log of error 
 

zpm "install git-source-control"

[TTN|git-source-control]    Reload START (/Users/irisusr/mgr/.modules/TTN/git-source-control/2.2.0/)
[TTN|git-source-control]    Reload SUCCESS
[git-source-control]    Module object refreshed.
[TTN|git-source-control]    Validate START
[TTN|git-source-control]    Validate SUCCESS
[TTN|git-source-control]    Compile START
[git-source-control]    Compile FAILURE
ERROR! Error registering reference '^Studio.SourceControl.ChangeI("$Change")' for use by 'SourceControl.Git.Change.

Is it possible to deploy a license server in a cloud and then download licenses from it to the host location at customer's data center?

We have a task that runs objectscript code to load data into a linked external table.  After upgrading from 2024.1 to 2025.1, the load is throwing an error, with error code -400, and no error message.  The data DOES get loaded into the external table in its entirety, so with no meaningful error message, its hard to determine what the issue is.  The result is the same with and without the USING clause, so don't let that confuse you.

Hi,

I'm trying to access to my datas stored in a RecordMap from SQLAlchemy, and I need to access to any tables already created before using SQLAlchemy.

Here is some part of my code :

TestBase:

class TestBase(DeclarativeBase):
    CreatedAt: Mapped[int] = mapped_column(TIMESTAMP, default=func.now())
    UpdatedAt: Mapped[int] = mapped_column(TIMESTAMP, default=func.now(), onupdate=func.current_timestamp())

Engine creation and entities binding :

bases = {
    "TEST": TestBase.metadata.

how to convert from json into sda container and then to fhir bundle resource. What are the out of the box DTL transformation class for this. Source would be my json that includes a few resources and targer should be a SDA container than will again be source to another transformation for which the target will be FHIR bundle. What I want to know is the target HS. 1for both SDA container and FHIR bundle. Thanks!

This link would be handy, if I could figure out how to 'set up' an IRIS / Universe DB..
https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KE…New post

*

Is there a 'how to' guide for doing this? I can't find anything specific, although, I know it can be done, because I have worked on a Cache/ Universe set up.

Hi,

I want to ensure that the parent ruleset has an EffectiveEndDateTime when I evaluate a rule's when condition() . How would I do that please ?

Thank you.

W

Hi Team,

I am using  ##class(%Net.Cloud.Storage.Client).SingleDownloadBlobToFile 

Able to upload small files less than 100 MB, but when uploading large files like 800MB we are getting Java Memory error. java.lang.OutOfMemoryError Java heap space

I am using default JavaServer (javaServer param as ""). This happens in all three data types (File, Stream and Object)

Reference : https://docs.intersystems.com/irisforhealthlatest/csp/documatic/%25CSP.Documatic.cls?LIBRARY=%25SYS&CLASSNAME=%25Net.Cloud.Storage.Client

Thanks in advance !
-
Arvind Balachandran

Good day,

Sinds 20 november 2024 We have getting an error in Production when execute query in Postgres .

FOUT #5023: Fout in Java Gateway: JDBC Gateway getClob(0,2) errorRemote JDBC error: Bad value for type long :  Sneeuwheide

Best Regards

Eduard

Up until recently, I have been toying around with REST/FHIR capabilities but only internally. Now I have a request to make REST API calls outside of our Network. 

I am using an RSA 4096 key, because Microsoft Active Directory Services which generates the signed certificate could not handle the Elliptical Key (ECC) when I put the request in.

• Others in the Healthcare industry, how have you handled this when there isn't an API manager involved?
• Do you connect directly through the Interoperability Engine using a TLS key?

Hi experts,
Please, do you know steps to analyse and correct this alarm?
This message was registered in messages.log

03/16/25-13:46:42:066 (21596) 2 [Utility.Event] ISCLOG: WebSocket [SendAsyncMessage] Error with OpenServer ns=ACB rtn=%CSP.WebSocket.1  data="0 "_$lb($lb(7953,"AKGmfwJ2q/lh6h0K/BKvQw==",,,,,,,,$lb(,"ACB",$lb("e^OpenServer+3^%CSP.WebSocket.1^2","e^SendAsyncMessage+13^%CSP.WebSocket.1^1","e^Page+4^%CSP.WebSocket.1^2","e^CSPDispatch+503^%SYS.cspServer^2","d^CSPDispatch+280^%SYS.cspServer^1","d^ProcessRequest+1^%CSP.Session.1^1","d^Request+685^%SYS.cspServer2^1","d^Request+25^%SYS.

Hi All,
I want to write testcase in objectscript but stuck at this point where I am getting a DynamicObject from the class method and how can I assert this and check it is okay. 
Also if in any case error It will throw error custom exception class that I created. How to handle assertion for exception in this case also.

This is for IRIS For Health 2024.2.0

We are migrating away from the .NET Gateway and trying to use the python integration instead.

I followed the instructions to install IRIS

Then I installed python following the IRIS documentation indicating that python should be installed globally.

I set up the PythonRuntimeLibrary and PythonRuntimeLibraryVersion options under System->Configuration->Advanced memory settings and when I run the shell function, I get python:

USER>do ##class(%SYS.Python).Shell()
 
Python 3.12.6 (tags/v3.12.6:a4a2d2b, Sep  6 2024, 20:11:23) [MSC v.

I am experimenting with OpenTelemetry and recently connected all IRIS instances to telemetry servers. I'm not interested in emitting custom metrics since IRIS does it fine, regarding tracing - we can use %Trace classes to emit custom traces, but what about logging?

I see that IRIS is able to send system log messages to the OpenTelemetry servers:

{
  "when": "2025-12-10 10:46:25.185",
  "pid": "11852",
  "level": "SEVERE",
  "event": "Generic.Event",
  "text": "ISCLOG: CSPServer  Error displaying login page $ZE= ns=TEST rtn=%SYS.cspServer .

Hi,

I see the following error when importing the Custom ASTM Schema in ASTM SCHEMA STRUCTURE page of Management Portal.

ERROR #6301: SAX XML Parser Error: zfieldDescToName+1^EnsLib.EDI.ASTM.SchemaXML.1 while processing MY_PATH\LCA1394_Schema.AST at line 8 offset 80

The line 8 is copied from ASTM E1394

Any advice?

-William

I am hoping for some guidance.

I am new to creating a new chart in Trakcare for use with Clinical Viewer.  My organization only has LDAP users, (we don't have the ability to use local users), that dictate what role/group a user is in, they are all the same across our Prod, Test, and Dev environments. 

I need to customize a chart for our end users.  BUT the how-to's all talk about creating a custom role for the new chart, which if I do this I would have to be added to this role/group which could cause issues with my ability to work in Prod and Test.

We have imported a CLinical Document Architecture v2 (CDA2) schema to create CDA2 content using %XML.Adaptor classes 

Schema 

https://gazelle.ihe.net/XSD/HL7/CDA/POCD_MT000040.xsd

One of the item is "observation " with value property 

Class Region.ITXX.Utility.COMMON.CDA2.Schema.POCDMT000040.Observation Extends (%RegisteredObject, %XML.Adaptor) [ CompileAfter = (Region.ITXX.Utility.COMMON.CDA2.Schema.ActClassObservation, Region.ITXX.Utility.COMMON.CDA2.Schema.NullFlavor, Region.ITXX.Utility.COMMON.CDA2.Schema.bl, Region.ITXX.Utility.COMMON.CDA2.Schema.