Hi I'm just trying to make sure I'm not missing a trick here.

Basically our PAS doesn't do hl7 messages but does some XML which you can create. So I'm just trying to create some xml files and then get healthshare/ensemble to parse them and to process accordingly.

I'm getting some good results doing this. But maybe I've got a small hitch. In each of my xml files I've the data for the patient/client.

0 1
0 633

HealShare 2017

Hi dev community,

I am currently working on an interface that needs to communicate to a SOAP/ITK endpoint.

I am using the EnsLib.ITK.AdapterKit.Operation.SOAPOperation to interface with an ITK
service, but it is proving to be more complex than originally expected to set up the web client
against that particular end-point since I haven't been provided with a WSDL from ITK service side as
the vendor state they are following the ITK standard and no WSDLs are needed.

0 1
0 298

I'm able to log into my local instance of HealthShare through the Management Portal, but once I've done so, the screen is entirely blank. I'm still able to access Terminal and Studio without any issue, as well as a hosted instance's Management Portal. I've tried stopping and starting HealthShare, no luck. I've been working on this instance for the past several months and haven't experienced anything like this, and I don't know of anything that I was doing that would have broken the Management Portal. Anyone have a suggestion as to where to go from here?

0 3
0 402
Question
· Mar 9, 2019
%SYS.TasK Related query

Hi Community,

I have to make a daily task (Job) which will run (7 am to 7 pm) in a day at an interval of 3 hours. Timings are as (7:00 am, 10:00 am,13:00 pm,16:00 pm,19:00 pm). But at each time when task will run i have to set a variables as per below condition

Sample:

1) If task run at 2019-03-19 07:00 am in morning

I have to set two variables (start and end) whose value will become like this

(set starttime= 2019-03-09 07:00:00.00 and set endtime=2019-03-09 10:00:00.00)

0 3
0 301

Hello,

When creating an outbound X12 file (834, 835, 837, etc), what's the easiest way to keep a segment count to use in the SE01 element? Other mapping tools I've used either detect it's an X12 file and do this automatically, or there's an option to keep a count after each outputted segment. The Data Transformation tool within Health Connect doesn't seem to have similar functionality, but I could just be missing something. Any help would be greatly appreciated!

Thanks,

Jason

0 3
0 1.1K
Question
· Aug 29, 2019
Create multiple dependent Tasks

Is it possible to create a task that will initiate a Business Service that is dependent on the completion of a separate EDI data process?

I have a complex data flow with multiple EDI processes where one process must run and produce one or more files that get deposited in the source folder for the next EDI process. The entire process is currently set up where 2 of the EDI processes execute at a specific time. The problem with that is when a network or server interruption occurs at the time they are supposed to start, it causes a complete failure of the entire process.

0 1
0 196
Question
· Dec 26, 2019
File System

Hello All,

I am working on Files where I have to compare contents of two files and display result.
e.g Suppose file1 contains data in Name and Roll form and file2 contains data in name and class form, so it should compare name from file1 and file2 and display those matching data(Name,Roll,class).

I have piece of idea about file system so any help would be appreciated.
Thanks in advance.

Regards,
Gunwant

0 1
0 282

Hello All,

I am able to transmit a small batch of billing files: B/W 5 and 20 without issue-
Put stream 11@%IO.LibraryStream to /SFTP/unmhsmcsa/OUT/TEST_021920201426.tst

But when the size of the batch increases to over 20 the operation hangs and I receive the error below: The file is created in the SFTP server with 0 data.

0 1
0 1K

Been cleaning up our production 2017.1 instance of Health Connect in preparation to a move to Health Connect 2020.1 (on IRIS!)

One thing I have found I we have built up a number of old classes and other configuration files.

It would be nice to start on the new server with a clean slate.

Is there any way to identify classes that haven't been used for a long time so they can be reviewed and removed?

Kind regards,

Stephen

0 4
1 342

Hi,

I've successfully installed and configured the custom MESH API supplied by intersystems. I'm able to send HTML rendered documents directly to GP's using Kettering.xml.

Ideally, I'd like to be able to send PDF/RTF files rather than HTML. Is this possible and if so can I still use Kettering xml? I know FHIR is the preferred method of transmission but i've tried sending a test FHIR message through MESH to EMIS but it's not displaying so I'm not sure if EMIS is able to display FHIR formatted messages.

Thanks.

Anthony Breen

0 20
0 973

We need to upgrade from Healthshare 2016.2 to HealthConnect latest but we are too far behind the current version to do an upgrade in situ.

So I need to create a new instance of HealthConnect and the copy across all the database definitions, namespaces and classes.

I know its possible to script this stuff and pull all the definitions out of the old Healthshare system and then apply them to the new HealthConnect instance.

0 3
0 238

We receive a JSON message containing an element which is larger than the system long string size. We are using Ensemble HealthShare v2017 which prevents us from using the %GET method as it doesn’t allow us to define the output as a Stream. We are instead trying to the read the contents of the JSON message using Readline function, and store the value into an instance of the %Stream.GlobalCharachter class, and then read from the instance of that class and write the contents of that element into a HL7 Message.

0 2
0 165
Question
· Dec 2, 2021
SNN Encryption

I need to store an equivalent of the SNN (Social Security number). I need it to be encrypted and I'll have to be able to search for it once stored.

For what I've seen my options are:

- SHAHash from the %system.encryption library. Simple and easy to implement. My question is, might collisions be a problem? We are talking about a 10 millions entry.

- AES encryption. In this case I'd like to know if there is a standard way for key management in the InterSystems environment.

0 2
0 295

Hi:

Had an issue after upgrading to 2021.1 where search bar for interoability will bring up "INVALID ACTION".

On upgrading to 2022.1 this still occurs.

It did not occur on another environement that was upgraded from 2017.2 straight to 2022.1

Is there any solution? Loads up SYS in url rather than customnamespacename

Issue is the url for instance brings through ip/csp/sys/EnsPortal.DTLEditor.zen?$NAMESPACE=X

0 1
0 236
Question
· Nov 30, 2023
Multitransformations of HL7

This question originally appeared in the comments of the post: Making use of Multiple Sub Transforms in a main map || HL7

I'm having a similar problem trying to get PRD(1) into PV1:ReferingDoctor and PRD(2) into PV1:ConsultingDoc

Running the subtransform will populate referring doctor for the first PRD, and then the second running will delete the PV1, make a new one with only the consulting doctor populated.

0 1
0 103
Question
· Mar 2, 2017
TLS Cipher Suite selection

Our client is a test out of 2016.1 (Build 656U) Healthshare that wants to do a one way SSL connection to our Java 1.7/Tomcat 8.0 server. We have yet to come up with a secure cipher set that Healthshare and Java agree on for the handshake. So far we've had to use these ciphers identified which are not recommended (though it does do a handshake properly).

0 1
0 978