New post

#DTL

11

Ensemble supports Data Transformation Language (DTL) for describing data transformations. DTL is an XML language. Ensemble provides wizards and graphical tools for creating, editing, and testing DTL transformations. A data transformation is a Caché class like the following. If you prefer you can use Studio to edit the class definition directly and bypass the wizards and graphical tools.

Documentation.

Hi,

Using Interoperability, I can't figure out how to create separate XML's files from a CSV-file using the GUI-features Record Maps/Complex Record Mapper -> Data Transformations. I'm familiar with reading/writing the files using File Service/Operation, but don't understand the processing-steps.
The preferred method by my colleagues is to do this without any Objectscript or Embedded Python coding, but if this can only be done by some coding that's fine as well.

See example below.
Any help is appreciated!

Kind regards,
Ties Voskamp

0 2
0 275

Is there an out-of-the-box or accepted standard method for loading up mappings between different code sets and then referencing these mappings (both directions) from DTL? First thought was the built in Lookup() and corresponding data tables but these only work in one direction (key -> value) and not the reverse. Obviously I can build my own classes to support a two way mapping but am wondering if there's a standard way of achieving this. The mapping should contain the code and display name from each of the code sets and allow mapping based on either code or display name.

Thanks

0 2
0 585

GT1|1|1|Test^Test||123 Building^123 Building^Brooklyn^NY^11220^United States^^^Kings|^PRN^PH^^^^^^^^^(111) 111-1111~^PRN^CP^^^^^^^^^(222) 222-2222|||""|IN|DGH^Daughter

I'm trying to clear the phone number completely.

Remove target.{GT1(1):GuarantorPhNumHome()} still gives me _~_

0 2
0 454
Question
· Dec 5, 2019
IRIS GUI/DTL Rewrite

Hi,

I've heard from two different sources the SMP (or parts of it) and for sure the DTL front end (in studio? via SMP?) have been rewritten to be more modern. But on a latest IRIS Community download everything looks the same to me. Am I missing something or is this Marketting Spin?

Hopefully I won't get banned for this post aswell......

1 2
0 355
Question
· Apr 18
HL7 DTL formatting

I need a DTL to handle this.

Any ideas appreciated.

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

0 2
0 86

Hi,

Is there a way to insert new Key/Value in an existing lookup Table via a DTL code? The only thing I found in the documentation is that we could use the following command SELECT KeyName,DataValue FROM Ens_Util.LookupTable WHERE TableName = 'myTab'. In the meantime I just created a table and used it in my DTL to insert new values and validate if the Key exist.

Regards

0 2
0 660

Hi All

I have a BP which has a transformation.

when I run the process I end up with the following error:

----

ERROR <Ens>ErrBPTerminated: Terminating BP Propirion.BP.GetServices # due to error: ERROR <Ens>ErrGeneral: Object is immutable
+
ERROR <Ens>ErrGeneral: Object is immutable

----

I have created a context named : HL7Message type of: EnsLib.HL7.Message and in the start of the BP assigned the request to it (using set in assigned activity)

What did I miss ?

Thanks

Gadi

0 2
0 1.1K

I have an EMR sending double quotes "" as the value. How do I write criteria to find this match in a DTL?

PV1|1|A|||||1111111111^Doctor^MR|||||||||||||||||||||||||||||||||||||20170331|""

source.{PV1:DischargeDateTime()}="""" didn't work

0 2
0 735

Hi all,

I'm looking for a user-friendly way to make a method library available in DTL, and by user-friendly I mean via '..MyMethod()' or '$$$MyMacro()' rather than '##class(MyPackage.MyClassName).MyMethod()'.

Does anybody know of a way to add a second superclass or a set of macros to a DTL ... or some other trick?

Cheers,

Otto

0 2
0 228

Hello,

I have a DTL to transform X12 Document 278 Request to 278 Response HIPAA 5010 schema. The DTL is called from BPL. I defined a class method that receives source, target, and context objects. How can I create 2000F loops in the response when there were none in the source object?

0 2
0 409

We are receiving an ORU message and the vendor is requesting that we append a new OBX segment at the end of the message and I wanted to reach out to see what options might be available.

So far, I tried the append action in the DTL editor with a single OBX-3 field but it seems to be appending to the field directly instead of creating a new OBX. I've started looking into if whether I could use a function but wanted to first check with the experts on the Discussion here in case there's an easier way to accomplish this. Thank you.

0 2
0 69

In specifying a "WHEN" condition statement, I don't seem to be able call a function directly from this declaration, as the generator seems to get confused

In the graphical editor:

%request.GetValue("MRN"))=123453

(%request.GetValue("MRN"))=123453)

In the DTL directly:

<when condition="(%request.GetValue(&quot;MRN&quot;))=123453)">

<when condition="(%request.GetValue&#40;&quot;MRN&quot;&#41;)=123453)">

0 2
1 369
Question
· Mar 13, 2018
DICOM to HL7

We have a case where a vendor can send us more information in the DICOM message rather than in the HL7 result message. In theory it should be possible to take a DICOM and convert it to HL7, stupid question is has anyone done it before? Does anyone have any good examples of a DTL they did to show me how to setup the message structures and translation?

Thanks

Scott Roth

The Ohio State University Wexner Medical Center

Scott.Roth@osumc.edu

0 2
0 1.1K

Hi,

I have an Ensemble DTL which is suppose to translate the inbound XML document to an outbound XML document.

I need to test if a particular XML element exists, to perform some translation.

In the DTL I have the following,

<if condition='source.{element1.element2.element3}'>

<true>

    // do something

</true>

</if>

How do you use if statement to test the source XML document to see if a particular element exists in the source doucment.

Thanks,

0 2
0 1.2K

We have one user that is having issues in Ensemble via browser. The two issues she reported are:

- If she opens a DTL, she has to Save or Compile the DTL before she is able to edit anything in the Actions tab. Typically, you can simply open the DTL, click on a line, and edit the Actions.

- If she opens the Tools tab and clicks the Test button, she does not get a response and it eventually times out on her. Typically, clicking the Test button will open a new window where you can paste a message to test your DTL with.

0 2
0 240
Question
· Nov 2, 2020
HL7 - FHIR

Hi All,

I know hundreds of people have done this but I'm looking for some DTL's as a start to do HL7 to FHIR, I appreciate everyone's HL7 is slightly different, but just some starter DTL's would be much appreciated? Can anyone help?

Regards

0 2
0 552

Hello,

I have a problem attempting to store a base 64 encode stream into the OBX:5 field of a HL7 message, by using the StoreFieldStreamBase64 method.

I'm using a transformer to input the contents of a pdf within a stream container (Ens.StreamContainer). The output is a HL7 message (EnsLib.HL7.Message 2.5:ORU_R01).

The transformer is being used in a business process.

This is the code used in the transformer to encode the stream to base 64:

0 2
0 442

IRIS for UNIX (Red Hat Enterprise Linux 8 for x86-64) 2024.1 (Build 267_2U) Tue Apr 30 2024 16:06:39 EDT [HealthConnect:7.2.0-1.r1]

I have a use case where Epic is sending an A60 Allergy transaction is set at the Patient level, but we have a system called VIBE which needs the ADT at an Encounter level instead. Currently we store ADT information in a MS SQL database for years, and we are querying it to get the latest Account Number to insert into the ADT^A60 for VIBE.

0 2
0 173

In my Data Transformation, the Target class needs to create a new List of objects (ListOfObj), depending on some conditions of Source class (Source/Target are completely distinct/different classes).

I experimented with Lists of 'primitive' data types (ListOfDT), and I could add new %String items (as an example) to a List of %String property, with "append" action in DT.

Does anyone have an example, or guidance, how to create new Lists of Objects in data transformation?

For example, if I have a 'container' class like this, it works:

0 2
0 890

Suppose I have an image and need to convert that image into a PDF for inclusion in an HL7.

I know that Zen Reports can display an image in a PDF but I do not want to view the image in a web page. I just need to convert the image to PDF in a Process and then include that PDF in an HL7. The workflow would be like this:

Get image -> Convert image into PDF -> Include PDF in HL7 OBX.

I know how to do the last part to include PDF in HL7 OBX. Just need ideas on the first part.

0 2
0 1.3K

Hello, I want to show a fellow DC member how to convert JSON file into HL7 message. I personally do not work with HL7. I set up a production with EnsLib.File.PassthroughService. It passes Ens.StreamContainer to BPL process. I call a DTL to transform StreamContainer to HL7 message. I run into an error:

ERROR <Ens>ErrBPTerminated: Terminating BP JSON2HL7 # due to error: ERROR #5035: General exception Name 'Parsing error' Code '3' Data ''
> ERROR #5035: General exception Name 'Parsing error' Code '3' Data ''

The code is in this GitHub repo:

0 2
0 722

Using the FHIR DEMO, I have pieced together how to make a FHIR Request using OAuth against an External FHIR Repository. When I execute the Patient search (HS.FHIRServer.Interop.Request), I get a HS.FHIRServer.Interop.Response that has a Quick Stream ID, which I then use to convert the Quick Stream to a JSON Dynamic Object. if I do a trace on the Raw JSON Object, I am able to pull out single elements, however I want to pull the raw JSON into a defined Class Structure.

0 2
0 218