Syndicate content 0  
 
All time

Hi

I'm using a class which extends %XML.Adaptor adaptor and I want to create an XML file with multiple namespaces, like the following:

<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap>

However, I don't see how to do this with the code I have. So far, I have

0 2
0 605

FHIR Terminology Service specification describes a set of operations on CodeSystem, ValueSet and ConceptMap resources. Among those operations, the following four operations appear to be the most widely adopted ones:

CodeSystem ValueSet
$lookup
$validate-code		 $expand
$validate-code

Developing a partial implementation of the specification has been an effective way to explore the new FHIR framework introduced in IRIS for Health 2020.1. The implementation includes four operations listed above, and supports read and search interactions for CodeSystem and ValueSet resources.

It's important to note that the implementation uses plain ObjectScript persistent classes as source terminology tables.

Open Exchange app
6 1
2 587
Question
· Mar 10, 2019
Try Cachè on Ubuntu

Hello.

There is a way to install and try Cachè 2018.1 on Ubuntu 16.04 distribuition or it's necessary use Red Hat/Suse distribuition to try Cachè on Linux?

0 4
0 603

Hello...

I need to convert a array (JSON) in a List Of String. I think, there is some method that does it directly.

Something like that:

SAMPLES>set list = ##class(%ListOfDataTypes).$fromJSON("[""a"",""b"",""c""]")

%FromObject+21^%Library.RegisteredObject.1 *%Exception.General Compose Compose %FromObject Unable to map frm %Library.Array instance to %Library.ListOfDataTypes

I have reading about this but I don't found some trick to help me.

0 1
0 606

I'm trying to read PID-3 and route the message based on if a certain prefix existed, but I keep getting Property Does Not Exist.

I've tried

HL7.(PID:PatientIDInternalID()) Contains "COS"

HL7.(PID:PatientIDInternalID(1)) Contains "COS"

HL7.{PID:PatientIDInternalID()} Contains "COS"

HL7.{PID:PatientIDInternalID(1)} Contains "COS"

This is a 2.3 MDM message. Thanks!

0 1
0 606
Question
· Aug 25, 2023
Reply Code Actions Question

Hi Everyone

I'm just wondering if anyone might have a list (or the experience to make a list) of the most often used / useful Reply Code Actions?

In the Help section of Health Connect Management Portal, it lists

'E=F' and ':?R=RF,:?E=S,:~=S,:?A=C,:*=S,:I?=W,:T?=C'

as the default options, though I'm curious if anyone else has found other codes or strings of codes useful?

Thanks in advance.

Best wishes

Robert

0 3
0 603
Question
· Jun 21, 2022
Freeze MSM/MUMPS

Hello, today we had another freeze in the system. It was close to 09:55. Logs follow for analysis. Following are MSM/MUMPS logs with about 1050 active connections at the time of the freeze. Does anyone see something different?

0 4
0 602

I'm attempting to use the .NET Entity Framework provider that is provided by InterSystems (see: https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KEY=GBMP_eframe). In our environment, the "Support Delimited Identifiers" option is turned off and we are not allowed to turn it on without significant testing effort. When this setting is off, the SQL that is generated by the Entity Framework provider is not considered valid and therefore the provider doesn't work (it DOES work,

0 3
0 603

Background: We have our own SQL map that predates InterSystems'. A program writes an XML file for each table map class as $system.OBJ.Export would. $system.OBJ.LoadDir loads the XML files into .cls files.

The reason is a long story, but we need to update parameter EXTENTSIZE (only) in existing classes. This does not seem to happen. As a test I used $system.OBJ.Export to make an XML file and edited EXTENTSIZE in the two places it appears in the XML:

0 4
0 602
Article
· Dec 9, 2019 1m read
SUDOKU demo

A demo in traditional style COS

This was written based on a previous trial in .XLS
It is far from being perfect. Rather a challenge for
improvement in all directions (code, interface, ...)
So anyone feel invited to make it better.

13 0
0 606

For a HL7 production, How will I be able to use two different segment level transformation (sub transform) in the main transform.

For Ex:
Few mappings from source PID --> target ZAX segment (subtransform 1)
Few mappings from source PV1 --> target ZAX segment (subtransfrom 2),

In the main mappings, I have used subtransform 1 followed by subtransform 2. It doesn't seem working fine.

Any suggestions please. Thanks:)

0 2
0 604

At Global Summit back in April, in his keynote speech, John Paladino mentioned that improvements to our documentation search were being made. You might have wondered, since things seemed to go quiet, whether anything was really happening. Well, we had an internal demo of some of the upcoming features recently, and the new capabilities look really cool – searching documentation has been frustrating for InterSystems staff too! So, I thought it might be good to pass on a few details to give a taste of what is coming. Of course, InterSystems will be putting together much better information

6 4
0 526

Sometimes we need to convert FHIR message to HL7 V2, e.g. to register a patient to the PACS system.
In this article, I will explain the steps to achieve the desired by using IRIS FHIR Server production.

Below are the steps we need to follow:

  1. Make sure FHIRServer production is started.
  2. Register Business Service with FHIRServer endpoint.
  3. Define Business Processes to convert FHIR message to SDA and then Convert SDA to HL7 v2.
  4. Post JSON resource to FHIRServer endpoint and get HL7 V2 response.

Let's review the steps in detail.

Step 1. Make sure FHIRServer production is started

Open the production page and make sure Production is started. In the next step, we need to make sure business service HS.FHIRServer.Interop.Service is registered with FHIRServer

Open Exchange app
1 0
0 605

Hello,

I don't know if the title is accurate enough. I have a legacy code that I need to optimize. It's a routine written in objectscript. It accepts 4 parameters and runs 6 nested FOR...$ORDER reading a big global.

The thing is when I run the routine the first time it takes around 60 seconds to run. If I run it again it takes 5 seconds. If I wait around 6 to 10 minutes to run it again, it takes 60 seconds again, but if I run it every 1, 2, 3... minutes it still takes only 5 seconds to run.

0 9
0 596

I can start cache without issue. There are no errors in the console log. However, when I access the management portal the page fails to display instead displaying the error page with the error "CSP application closed the connection before sending a complete response". This was working yesterday so the root cause is not clear. Reviewing all log files, the only error I have found is in the csp.log. The error is:

0 2
0 603

Hey Developers,

Learn how to use InterSystems IRIS data platform to meet change data capture (CDC) challenges created by data silos:

⏯ Stay in Sync with Change Data Capture

https://www.youtube.com/embed/mOGi0M_N73w
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

4 0
0 605
Article
· Aug 22, 2020 1m read
Transition from Cache to IRIS: Value Canvas

Some clients ask me about migrate from Cache to IRIS. Why migrate to IRIS? Cache is excellent, stable, has good performance. These clients are right, but in the last years, the digital transformation imposed more complete solutions for the new requirements and InterSystems was a visionary to perceive it and launch IRIS.
It is a data platform ready to this digital transformation challenge. To show this, I created a Value Canvas.

1 0
3 605

Hi,

I have a program that displays the current running processes to the screen. I need to have a program execute that display program and capture the results to a file. The display program does pause at the bottom of each page waiting for an 'enter' to go to the next page.

Note( the display program will not successfully compile on the current system but it does work)

Also - very, very new to Mumps.

Thanks,

Bob

0 23
0 582
Question
· Sep 6, 2018
list Of %String problem

I am trying to initialize a list of %string property to an empty list, and after add eleements.

d ##class(Test.Test).Test("hello") ; works perfectly
d ##class(Test.Test).Test("") ; does not work, the list stays empty

How can I do that. Thank you so much

0 1
0 604