Hi Everyone!

Enjoy a new session recording from Global Summit 2017 on InterSystems Developers YouTube Channel:

Tell Your Story With Dashboards

Hi guys, I'm helping one of our customer to use unattended install to standardize their deployment. I'm using Unattended Installation and Installation Manifest. 

Although I can use the combination to install HealthConnect and then create namespaces and DBs as they need, there are still several tasks that I did not find the solution yet. As following:

1. Configure mirrors

2. Set the directory to store journals

3. For a given Ensemble name space, configure the period length in purging messages.

4.

I have just upgraded to Atelier v1.2 beta and find that I'm using up the license pool.

The longer I work within Atelier the more csp sessions for application /api/atelier I'm creating.  It seems that each class I'm opening in the editor creates a new session. This is ok up to 25 sessions at which point I'm consuming 25 licences units and soon after nobody can log in any more because I'm consuming all licenses. I never really looked at this with v1.1 but that is because I never experienced this problem, so my assumption is that something changed with v1.2.

This is on a Caché 2017.2 instance.

Ensemble 2017.2.

I am writing a DTL code action based on the solution described in the posting "How to avoid truncation in HL7 messages with very large fields (32K+)". Because the source value is in a repeating segment, and the specific repetition in which the value is located can vary, I would like to use a variable (specifically the k1 key) to specify the repetition to get.  I have been unable to get it to work.

OBXgrp is the location in the path at which the repetition occurs. Hard-coding an index, as in the example below, works.

do source.GetFieldStreamRaw(.stream, "PIDgrpgrp(1).ORCgrp(1).

Good afternoon, I have a tabGroup where I populate tabs with images using the scr property. If a user scrolls to the bottom of the image on a tab, when they go to the next tab, they are also at the bottom. When moving between tabs, I would like the user to always be presented with the top of the tab content. I have not been unsuccessful in doing this. Would someone have input on how to make this happen? Thank you in advance for any and all feedback.

I  have generated a class using the linked procedure wizard however  I can't get it to work if the  datatype  of one of the parameters is VARCHAR(MAX).  It works fine if I change it to say VARCHAR(500) and  rerun the  stored procedure wizard. 

I get the following  error returned.:

ErrorMsg:   SQLState: (07002) NativeError: [0] Message: [Microsoft][ODBC SQL Server Driver]COUNT field incorrect or syntax error

Can anyone see what I am doing wrong?  I think it is to do with the way I am using the  %Stream.GlobalCharacter?   Any help is much appreciated.

Hi, Community!

This post is a digest of the Developer Community postings in May 2018.

Most viewed

Atelier 1.2 has landed!  190 views

Replacing ZEN - Part 2 - Strategic Issues  156

Atelier 1.

In old Caché versions it was possible to create a new role based on predefined %Developer by copying it and adding some resources as needed. It was true at least from 2010.1 to 2015.1.

After upgrade from 2015.1.4 to 2017.2.1 it turned that it's only partially true now. User with a "New-Developer" role can enter Studio and open existing cls/mac/etc for editing and everything is OK unless he tries to create something new (Ctrl-N), than he gets a pop-up with %msg: <User xxx does not have enough privilege to execute stored procedure %CSP.

I posted a question here about a week ago about GIT. I believe we understand it well enough to use. We are still trying to determine the best flow for our needs.

But now the question is how do we integrate this with GIT?

We are new to both Git and Atelier and would love to get advice.

Currently I  believe the flow would be something like this:

1.Create a branch from our origin repository (let's say Ticket 123 branch)

2.Download that branch locally to our PCs with Cache running a local instance

3. Checkout Ticket 123 branch locally

4.

Hi I am getting below error after rebooting Linux system and restarting cache services.

Daemons are running (shared memory object is missing)

cconsole giving error 3 Daemon WRTDMN (pid 28161) died. Freezing system

I was wondering if there is a way of adding additional headings under the settings tab for services etc?

I'm aware its possible to add items under the additional settings heading, but being able to split these out into separate headings would look a lot nicer.

While trying to start the instance INSTANCE001, getting below error, where cache.shid file doesnot contains anything.

This is in a Linux server.

Any help is appreciated.

$ ccontrol start INSTANCE001

INSTANCE001 startup failed: Instance is down although there is process attached to shared memory

You can get the shared memory ID in cache.shid file

then run 'ipcs -m -a' to see the number of processes still attached.

Is there any easy way to create a WebSocket to Telnet proxy within the Cache environment?

I would like to use a html5 telnet emulator to connect to cache, but need to create a proxy,

Is this a simple task?

%XML.Reader.OpenFile fails with SAX XML Parser-Error: <STORE> on importing large (1.5 GB) xml file. Any workaround for it?

My goal is one-time import of the file using classes generated by its XML schema.

Release 2017.2.

I have created a class that extends Ens.BusinessOperation, and in my class I have defined a custom property. How can I change the property's heading that is displayed on the Management Portal Settings tab?

We have received a dead job alert. We want to know when occurs this, I mean, Ensemble kills a job automatically if it is consuming a lot of memory or CPU? Or is the operating system who kills the job and Ensembe detects it and alerts?

I want to generate one of the following xml data, but after I generate only de="", after I need to generate is de="DEX71.41.009.01"

//// result:
<OPTREGISTER>
      <THBZ de="DEX71.41.007.01" display=""></THBZ>
      <GHFS de="DEX71.41.008.01" display=""></GHFS>
      <GHF de="DEX71.41.009.01"></GHF>
      <ZLF de="DEX71.41.009.01"></ZLF>
      <QTF de="DEX71.41.009.01"></QTF>
      <WDBZ de="DEX71.41.010.01" display=""></WDBZ>
      <GHKSDM de="DE08.10.025.00" display=""></GHKSDM>
</OPTREGISTER>

The classes I use are as follows:

////// ------ Test.Common.PropertyParameters cls
Class Test.Common.

Hi,

We want to monitor an Ensemble Production and send custom email alerts in function of some Rules. For example, if we normally receive 1 message per second, if suddenly we receive 5 or more messages per second, we want to send an email alert. And if tomorrow we don't want to check this again, we want to disable it through Ensemble Business Rules.

Just now when I started up my Eclipse I was offered an Atelier update. After waiting for so long, how could I possibly refuse? Wish me luck!

I have a vendor that is sending me an Abbreviation in FT1:16.4.2 that I need to look up against a table to find the correct ID for.

FT1|1|||20180523161501|20180523161503|CG|1906551^Lipid Profile|||1||||||^^^ LAB&06CL|||Z00.00||00410^Knerr^Joel||721410||30100001^Lipid Profile|

But in my Business Process when I refer to request.GetValueAt("FT1:16.4.2") its not recognizing that this field contains information. Is my syntax wrong?

While testing Atelier 1.0.255 I noticed that the namespace subtree of my Atelier project used different icon shading for the top-level Classes folder compared with the top-level Routines one:

Drilling down into parts of the Wasabi package helped me work out the significance of white-filled icons versus brown-filled ones:

A package is white if there are no classes in it, but only subpackages.

As a footnote, this only happens when browsing the namespace within Atelier Explorer.

What would be the best way to count all Interface messages on some Business Services and Operations in Ensemble? 

I need this to determine the volume of messages for a given week or month, would this be easier to do in SQL?

Hi - is anyone successfully using Atelier on a Mac? I seemed to have installed everything correctly but I cannot create Atelier projects or edit mac routines. Eclipse is giving a lot of spurious errors. I have yet to find anyone that has a good word to say about Eclipse and they all use other IDEs but that's what Intersystems have chosen. If people are able to use it on the Mac then fine, I'll just carry on googling... Thanks

Hi All

I'm looking for the a simple-quick-easy solution to monitor a SQL table thought Ensemble.

I have a process that update a DataBase ,a scheduled task that runs every night  (Not Ensemble)

In the end it updates a table (replica_status) with a new recored with two fileds:  Id, DateTime

I looked around the community but didn't find an answerd case.

I'm thinking on a Task that will run a sql outboud adapter BO that checks that table and send a alert if no new record was created yesterday

is this the right approach or is there's a better solution?

Thanks Gadi

Hi everyone

I'm coding a script in order to validade an installation package following the steps:

In some specific cases I will need to terminate the current process and start a new one with some new parameters.
With any code inside my try catch block, whenever I terminate the process I receive a RESJOB and it works perfectly.
When my job is running a compilation ($SYSTEM.OBJ.Compile(.

If you're using Firefox, you probably know that there are search engine addons that allow us to use website search directly. Now, docs.intersystems.com is also available as a search engine here. Here's how it looks:

Has anyone used ClearRuntimeAppData,  I am using the EnsLib.SQL.InboundAdapter and pulls the SQL query fine, but if the service needs to keep pulling the same rows the next time the service is started but it will not, due to the parameter “key Field Name”

Hi Community!

New session recording from Global Summit 2017 is already on DC YouTube Channel:

SQL – Things You Should Know

Hello glabal masters,

I am trying to develop WAS using Cache and Spring Framework.

The ON DUPLICATE KEY UPDATE is not working.

Hi everybody,

 I need to load data from excel to a class in cache, but this class has foreign key and property like AS ..... (other class). This class represent an item product that belongs to a line, the line blelongs a group and the group belongs a Category. 

Example:  

Property bdGrupo As Innova.CL.Core.BD.Operacion.Producto.Grupo;

Property bdLineaPR As Innova.CL.Core.BD.Operacion.Producto.Linea [ Cardinality = parent, Inverse = bdProductoCH ];

Property bdCategoriaProducto As Innova.CL.Core.BD.Operacion.Producto.